SS30H - Ceiling fan KDK - Free user manual and instructions
Find the device manual for free SS30H KDK in PDF.
| Product Type | Ceiling Fan |
| Brand | KDK |
| Model | SS30H |
| Blade Span | 30 inches (76 cm) |
| Number of Blades | 3 |
| Motor Type | AC Motor |
| Voltage | 220-240 V ~ 50 Hz |
| Power Consumption | 55 W |
| Airflow | 4500 CFM |
| Speed Settings | 3 (Low, Medium, High) |
| Control Type | Pull Chain |
| Reversible Motor | Yes (Summer/Winter mode) |
| Weight | 6.2 kg (13.7 lbs) |
| Mounting | Ceiling mounted, downrod included |
| Material | Metal body, plastic blades |
| Noise Level | < 35 dB |
| Safety Features | Overheat protection, balanced blades |
| Cleaning | Wipe with damp cloth; do not use abrasive cleaners |
| Warranty | 1 year limited |
| Included Components | Fan, downrod, mounting bracket, pull chain kit |
Frequently Asked Questions - SS30H KDK
User questions about SS30H KDK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Ceiling fan in PDF format for free! Find your manual SS30H - KDK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SS30H by KDK.
USER MANUAL SS30H KDK
Operating Instructions
Electric Fan (Box Fan)
Model No.
SC30H
SC30X
SS30H
SS30X

natural_image
Illustration of a standard office air conditioner fan mounted on a stand (no text or symbols visible)KDK Company, Division of PES
Head office: 4017, Takaki-cho, Kasugai, Aichi, Japan
© Panasonic Ecology Systems Co., Ltd. 2014

SS30H8950AC
M1113T1105
Make sure to disconnect the power plug before cleaning.
Use soft cloth soaked in warm water with detergent. Wipe with dry cloth.
Attention:
• To avoid scratching the surface, please do not rub too hard with dry cloth.
- Do not use thinner, benzine, alcohol, cleaning powder, alkaline detergent, etc.
- When using chemical detergent, follow its instructions.
進行保養前,請先拔出插頭。
Notice: • Do not attempt to force the louver to turn.
A 控制板
Remote control model only (SC30H, SC30X)
① Receptor
J Remote Control Unit
K Transmitter
L Protective plastic sheet
Before use the remote control unit, you must pull
out and remove the protective plastic sheet.
(Please dispose of the sheet according to the local regulations.)
local regulations.)


How to assemble
組裝方法
Cách lắp ráp

① Connect the joint a to the lower pipe a. Secure the pipe with screw.
② Connect the lower pipe a to the joint b. Secure the joint with screw.
③ Connect the upper pipe b to the joint b. Secure the pipe with screw.
- When connecting the pipe and joint, align the mark pipe C and joint C as illustrated on the right.
Do not operate the product before the pipe is firmly fixed to the joint.
The product may become unstable and fall down. It may cause injury.

注意



How to use
使用方法
Cách sử dụng
كيفية استخدام
![Louver Timer Speed 1/f Yuragi (Long press 2 sec) Off /On Louver LOUVER Timer TIMER Speed SPEED 1/fYURAGI (Long press 2 sec) The louver rotates or stops with the button pressed. Each press of the button will switch to next timer setting. • [Timer] lamp indicates remaining time. 1(1 hour), 2(2 hours), 4(4 hours), 8h.(8 hours), All lamps turning off (Cancel) Each press of the button will switch to next wind speed setting. • [Speed] lamp indicates current wind speed. 1(Gentle), 2(Medium), 3(Strong) 1/f Yuragi • Press and hold the button for 2 seconds to switch 1/f Yuragi operation ON or OFF. During 1/f Yuragi operation, the preset wind speed lamp blinks. • 1/f Yuragi operation is turned on or off with the button pressed. (Remote control unit) 每次按下按钮时, 风扇的百葉窗會 起動或停止。 按掣可轉換至另一個定時設定。 • [定時器] 指示燈顯示剩餘時間。 1(1小時)、2(2小時)、4(4小時)、 8h.(8小時) 所有燈熄滅(取消) 按掣可轉換至另一個風速 設定。 • [風速] 指示燈顯示目前 風速。 1(弱)、2(中)、 3(強) 1/f Yuragi • 按一下按鈕以開啟或關閉 1/f Yuragi 運作。 (遙控器) Cánh đào gió quay hoặc dùng khí án nút. Mỗi lần nhân nút sẽ chuyển sang thiết lập chế độ enhancing giờ tiếp theo. • Đèn [Ché độ enhancing giờ] cho thấy thời gian còn lại. 1(1 giờ), 2(2 giờ), 4(4 giờ), 8h.(8 giờ) Tất cả đến tất (Hủy) Mỗi lần nhân nút sẽ chuyển sang cải đặt tốc độ gió tiếp theo. • Đèn [Tốc độ] cho thấy tốc độ gió hiện tại. 1(Nhe), 2(Vùa), 3(Manh) 1/f Yuragi • Nhân và giữ nút trong 2 giấy đề BAT hoặc Tất hoạt động 1/f Yuragi. Trong chế độ hoạt động 1/f Yuragi, đến tốc độ gió thiết lập sẵn sẽ nhập nháya. • Hoạt động của 1/f Yuragi được bất hoặc tất với nút được nhân. (Bộ điều khiển tử xa) فتحات التهوية Chiشقوقة تمور أو تقدم مع ض tight الن: كل صقطة للزير ست-hour إلى تهيئة المؤقت التالية. ▪ ت Sunnyرية (اللّست) : إلى الوقت التبقي- • ساعات (2/4) : 1/1 (ساعات) : 2/4 (ساعات) : 4/4 (ساعات) : 6/4 (ساعات) : 8/8 ▪ تطلفن كافة للصابيع (اللغة) كل ضughطة للزير ست-hour إلى تهيئة سر عة اللّقة التالية. ▪ ت Sunnyرية (السر عة) : إلى سر عة اللغة اخالية (١ مادي) : 2 (متوسطا) 3(قوي) 1/f Yuragi • أو ON ON أثناز إجراء العملية OFF • نامز عملية OFF • وحض لبة سر عة اللّقة الحيوطع مسبّاً. • يتم مشغير أو إيقاق empMilie الارز بهم ي LINEما يكوين الارز م诸如وظاً (وحض التحكم عن بعد)](/content/2026/05/1063747/images/725a09465b75774218bac8c889ed8ca4555275635a40e9cee1baa7be4b11f417.jpg)
Note:
- Please note that Louver, Timer and Speed buttons are effective only when the power is On.
■說明:
natural_image
Line drawing of a hand holding a fan mounted on a stand (no text or symbols)Adjustment of wind direction
Grasp main body, then move it. It is adjustable up to 90° upward, up to 45° downward.
Height adjustment control
Loosen the knobs and adjust main body to the desired height, then tighten the knobs.

CAUTION

Do not put your fingers into the moving parts. It may cause injury.
風向調節
Remote control model only (SC30H, SC30X)
使用方法
How to use the remote control unit
- Point the remote control unit in the direction of the receptor.
• The controllable distance is about 4.5 m from the receptor and 25 degree angle to the right and left. When leaning the main body over 45 degree, the remote control may not respond. - If the remote control unit becomes ineffective, replace with a new battery.
■ Attention:
- Do not spill liquids on the remote control unit. Do not drop or step on it. It may damage the remote control unit.
- Do not cover up the receptor. It prevents the remote control unit from functioning.
- Keep the receptor out of direct sunlight and strong artificial light. It may diminish the remote control effectiveness.
遥控器使用方法

How to replace the battery
① Turn over the remote control unit. Press tab A toward the right and pull in front.
② Pull out the battery holder B and replace the battery.
- Use the specified battery type. (Lithium Button Cell Battery (CR2025))
• The battery must be installed with the positive side facing up.
③ Insert the battery holder B back.
Note:
Notice:
- Because the supplied
- Do not apply excessive force to the battery holder.
battery is installed when
- When disposing of used battery, please contact your local authorities or dealer and ask
shipping, life may be short.
for the correct method of disposal. (Insulate it by covering with cellophane tape etc.)
如何更換電池
Keep the lithium battery out of reach of small children.
Small children may accidentally
swallow it. If swallowed,
call your doctor for advice
immediately

警告

把鋰電池放在幼童觸及不到的地方。
幼童可能意外吞下。如出现
此情況,請立即就醫。

CÀNH BÁO

Always follow these instructions
To avoid the possibility of causing injury to users or damage to properties, please follow all the explanations written below.
- The following symbols differentiate the levels of danger and injury that may result if the product is improperly used.

WARNING
This symbol indicates that improper handling may cause a risk of death or serious injury.

CAUTION
This symbol indicates that improper handling may cause a risk of injury or damage to properties.
- The following symbols indicate type of instructions to be observed. (The symbols given below are examples.)

This symbol denotes an action that is PROHIBITED.

This symbol denotes a COMPULSORY action.

This symbol denotes an action that should be carefully performed.

WARNING

Never try to take apart, repair or modify this product. Ignition or abnormal operation may occur, and cause electric shock, fire or injury. - Contact the dealer for repairing this product.

Do not use more than the rating of the electrical outlet or wiring accessories. Do not connect this product to power supply except rated voltage and rated frequency. If you exceed the rating using a power strip etc., heat generation may occur and caus

When a failure or malfunction occurs, stop using the product immediately and disconnect the power plug.
Heat generation etc. may occur and cause electric shock or fire [Examples of failure/malfunction] - Abnormal noise is observed during operation. - Moving the power cord stops operation. - Burning smell is observed. - Motor unit, power cord or plug becomes abnormally hot. Contact the dealer immediately for maintenance/repairing.

Do not turn on the product unless blade, guard and louver are installed properly. It may cause injury.

Do not damage the power cord or plug.
(Do not cut, modify. Do not forcefully bend, twist or pull. Do not put near heating appliances, or put anything heavy on. Do not bundle.)
If damaged power cord or plug is used, short circuit etc. may occur and cause electric shock or fire. - Contact the dealer for repairing the power cord or plug.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Make sure the power plug is fully inserted into socket.
Loose engagement of the plug and socket may cause electric shock or fire due to overheat. - Do not use the damaged plug or loosen socket.

Do not connect or disconnect the power plug with wet hands. It may cause electric shock.

Do not place the product on its power cord.
It may damage the power cord, short circuit may occur and cause electric shock or fire.

Do not immerse the product in water, or put water on it. Short circuit may occur and cause electric shock or fire.

Do not place the product near heating appliances. Plastic parts may melt and catch fire.

Do not pull the power cord when carrying and storing away the product. It may damage the power cord, short circuit may occur and cause electric shock or fire.

Do not stretch the power cord during operation. It may damage the power cord, short circuit may occur and cause electric shock or fire.

Do not swing around the product with the handle. It may cause injury or damage the product.

Make sure to disconnect the power plug when assembling, cleaning, and storing away the product. The product may start operating unexpectedly and cause injury or electric shock.

Wipe off dust on the power plug periodically.
If the plug is used with dust accumulated on it, humid air etc. may cause poor insulation and fire.
- Disconnect the power plug and wipe it with a dry cloth.
- Disconnect the power plug when not using for a long period.

Keep the lithium battery out of reach of small children.
Small children may accidentally swallow it. If swallowed, call your doctor for advice immediately.

CAUTION

Do not use the product at the following locations:
- Where it may be exposed to flammable gas or near sources of flame such as gas ranges.
• Where it is exposed to rain or water.
Flame failure, catching fire, explosion, short circuit, etc. may occur and cause electric shock or fire.
- Where it becomes unstable or place near the obstacles. The product may fall down and cause injury.
- Where it is exposed to direct sunlight or wind-driven rain. Overheat etc. may occur and cause electric shock or fire.

Do not operate the product before the pipe is firmly fixed to the joint.
The product may become unstable and fall down. It may cause injury.

When disconnecting the power plug, grasp and pull the plug, not the cord.
It may damage the power cord, short circuit may occur and cause electric shock or fire.

Do not put your fingers into the guard, louver or any moving part of the product.
It may cause injury.

Do not put your fingers into the moving parts when adjusting wind direction.
It may cause injury.

Do not put your fingers into the pipe when assembling. It may cause injury.

Do not place anything on or sit on the product. It may cause malfunction or injury.

Do not drag the product. It may cause damage to the floor.

Do not expose yourself to wind generated by the product for a long time. It may cause health related issue.

Do not operate with the remote control unit other than the supplied. The product may start operating unexpectedly and cause discomfort or injury.

Special attention should be paid when people such as the following use this product.
(Infants, children, elderly people, or people who cannot control their own body temperature) Exposed themselves directly to wind generated by the product for a long time, they may feel sick or get dehydrated.
Notice:
- Do not place the product near insecticide, oil corrosive solvent.
It may cause bad effects on quality, or damage the product. - Do not place the product in high temperature, high humidity or dusty place.
It may cause bad effects on quality, or damage the product.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experiences and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
■ Children should be supervised to ensure that they do not play with the appliance.