FS40-10DR - Household Fan MIDEA - Free user manual and instructions

Product Type	Stand Fan
Model	FS40-10DR
Brand	Midea
Fan Diameter	40 cm (16 inches)
Height	130 cm (adjustable)
Weight	5.2 kg
Rated Power	50 W
Voltage	220-240 V~
Frequency	50/60 Hz
Speed Settings	3 speeds (Low, Medium, High)
Oscillation	Yes, wide-angle oscillation
Remote Control	Yes, with on/off, speed, oscillation, timer
Timer	Up to 7.5 hours
Blades	5 ABS blades
Motor Type	Copper motor, quiet operation
Safety Features	Overheat protection, tip-over switch
Adjustable Tilt	Yes, manual tilt adjustment
Noise Level	≤ 60 dB (max)
Material	ABS plastic, metal stand
Cleaning	Remove grille and blades with damp cloth
Warranty	1 year
Included Parts	Fan head, base, pole, remote control, manual

Frequently Asked Questions - FS40-10DR MIDEA

How do I clean the Midea FS40-10DR fan?

Unplug the fan before cleaning. Use a soft damp cloth to wipe the grille, blades, and remote. Do not use abrasive cleaners or submerge any part in water. For stubborn dust, use a vacuum with a brush attachment.

Does the remote control come with batteries?

The remote control does not include batteries. You will need to insert 2 AAA batteries (not included) into the remote before use.

How do I set the timer on the fan?

Press the timer button on the control panel or remote to set the timer from 0.5 to 7.5 hours. The fan will automatically turn off after the set time.

Why is my fan not oscillating?

Ensure the oscillation button is pressed on the remote or control panel. If still not working, check for any obstruction in the fan head or contact customer support. The oscillation feature may also be disabled when the fan is in certain tilt positions.

Can I use the fan with an extension cord?

It is not recommended to use an extension cord as it may cause power loss or overheating. Plug the fan directly into a wall outlet. If necessary, use a heavy-duty extension cord rated for at least 10 amps.

How do I assemble the stand fan?

Attach the base to the pole and tighten the locking nut. Then connect the fan head to the pole and secure it. Finally, screw the rear grille, blades, and front grille in order. Refer to the manual for detailed step-by-step instructions.

What does the tip-over switch do?

The tip-over switch automatically cuts off power if the fan falls over, preventing accidents and damage. Make sure the fan is on a stable, level surface for proper operation.

Is the fan suitable for outdoor use?

No, the Midea FS40-10DR is designed for indoor domestic use only. Exposure to moisture, rain, or direct sunlight can damage the fan and create electrical hazards.

Can I replace the fan blades or grille?

Yes, you can purchase replacement parts from Midea authorized service centers. Always unplug the fan before attempting any disassembly. Use only genuine Midea parts to ensure safety and performance.

How loud is the fan on high speed?

The fan operates at a noise level of approximately 60 dB on high speed, which is comparable to a normal conversation. It is quieter on lower speeds and suitable for use in bedrooms or offices.

USER MANUAL FS40-10DR MIDEA

Line drawing of a standard floor-mounted fan with a vertical stand and control panel (no text or symbols)

OWNER'S MANUAL

STAND FAN

MODEL:FS40-10DR

Please read the instruction manual carefully before use and safekeeping.

CAUTION

Read Rules for Safe Operation and Instructions Carefully.

WARNING

1. If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

2. To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.

3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance.

4. When the appliance is not in use and before cleaning, unplug the appliance from the outlet.

5. Keep electrical appliances out of reach from Children or infirm persons. Do not let them use the appliances without supervision.

6. When the fan was assembled, the rotor blade guard shall not be taken off anymore

7. Prior cleaning unplug the fan.

8. The rotor guard shall not be dissembled/opened to clean the rotor blades.
9. Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.

1. Never insert fingers, pencils, or any other object through the grille when fan is running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid overturning.
4. DO NOT use fan in window, rain may create electrical hazard.
5. Household use only.

PART FIGURE

ASSEMBLY OF CHASSIS & COLUMN UNIT

1. Unscrew the 7-shape Bolt from the Extension Pole. (Fig.1)
2. Insert the extension pole into the chassis and tighten the 7-shape Bolt (Fig.2)
3. From the extension pole loosen the height adjustment ring and adjust the internal pole to the desired height. (Note: If you can't find the internal pole, it must inside the extension pole. You can pull it out from the extension pole.) (Fig.3)
4. To attach the head unit to the internal pole, loosen the thumb screw on the bottom of the head unit. Place the head unit on the internal pole and tighten the thumb screw in alignment with the groove on the internal pole. (Fig.4)

CAUTION: Height adjustment ring must be fully fastened before the assembly of the motor section to the internal pole.

GRILL & FAN BLADE ASSEMBLY

1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut counterclockwise to remove both of them. Fix the rear grill to the motor then tighten the plastic nut again. (Fig. 5)
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove of the blade. Turn the spinner counterclockwise to tighten the blade. (Fig. 6)
3. Fasten the front grill and the rear grill by the grill clip and then tighten the fan grill locking screw and nut. (Fig. 7)

Illustration of two hands manipulating a circular object, labeled Fig.7 (no text or symbols on the objects)

The “⏻” key is for switching on the fan .The fan will be started at low speed.

Press the “⏻” key if the fan needs to be switched off.

1. “✿” SPEED KEY

When the fan is working, press this key repeatedly, the fan will work in "1-2-3-1(Low-Medium-High-Low) sequence.

1. “L” TIMER KEY

Line drawing of a remote control panel with six function buttons (no text or symbols)

Fig.8

When this key is touched repeatedly or kept in pressed state, the time to be set for air delivery increased step by step of each 0.5 hour and sums to 7.5 hours in 15 steps.

For instance, if the fan operation is required to be set for 5.5 hours, this key must be touched repeatedly so that the pilot lamps for 0.5, 1 and 4 hours lighten together. It means that the set time is 0.5 + 1 + 4 = 5.5 hours.

The time setting indicated by the pilot lamp will decrease gradually by a unit of 0.5 hour.

Don't press the TIMER key when the fan is required to operate continuously. At the moment all pilot lamps don't light.

1. “↖” OSC KEY

After the fan is started, press this key to oscillate the fan, and stop the oscillation at desired direction by pressing again. By rotating the fan head by hand, you can get wider oscillation angle.

Fig.9

5. “ ” MODE KEY

Press this key to select mode. The sequence is normal, natural and sleep when this key being touched repeatedly or continuously. The light can indicate mode state.

Normal wind

Press the "mode" key to select the normal wind, then press the "speed" repeatedly to choose 3 speed.

Natural wind

Press the "mode" key to select the natural wind, then press the "speed" repeatedly to choose 3 speed.

Sleep wind

Press the "mode" key to select the sleep wind, then press the "speed" repeatedly to choose 3 speed.

5. " 🔥 " SILENCE KEY

In the state of non-silence, press silence button, the fan would be in silent state and the silence icon 📋 is lightened, while the indicator icons of the other wind types and wind levels would turn off. In silent state, press wind type button, blast volume + and – buttons, there would be no response, while other buttons could respond normally. Press silence button again to quit and the fan would return to the previous working state. The silence icon turns off and 00 is displayed on the digital screen.

b. BATTERIES

(battery not included in the packing)

(1) Slide the battery compartment Cover.
(2) Insert the batteries, and make sure that the batteries are placed as shown in the Fig.10.
(3) Slide back the battery cover.

NOTES: Use size "AAA" manganese or alkaline batteries. Do not use rechargeable batteries.

c. BATTERY WARNING AS BELOW

1. "Do not dispose of batteries in fire, batteries may explode or leak."
2. -Do not mix old and new batteries.
3. -Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

Diagram of a mechanical clamp or clip assembly with labeled terminals and a handle (no text or symbols present)

Line drawing of a hand holding a handheld device with an arrow indicating rotation (no text or symbols)

Point the remote controller at the receptor on body of the fan and press the desired button. The remote controller will work at distances of up to roughly five meters and the angle of 30 degree included between right and left from the receptor.

The batteries must be removed from the remote controller before it is scrapped and that they are disposed of safely.

e. OVERHEAT PROTECTION OF THE MOTOR

The windings of the motor have a thermal-fuse that burns out and the fan switches off and temperature of the motor is no longer going up so that plastic parts of the fan don't subject to deformation so far so to be burned by the overheat if the motor is overheat for any unexpected reason.

II. Control Panel (Fig.9)

These keys of the control panel may be used as same as of the remote controller.

III. Tilt Adjustment

To adjust the air flow upward or downward, push the grilles lightly to the desired direction.

IV. Height Adjustment

The height of the fan can be adjusted by loosening the height adjustment ring, carefully carefully raising or lowering the fan and firmly re-tightening the height adjustment ring.

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed.

1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the following as a cleaner: gasoline, thinner, bending.
5. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove soap film with dry cloth.

GD Midea Environment Appliances Manufacturing CO.,LTD.

Midea Industrial Park, Dongfu Road, Dongfeng Town, Zhongshan, Guangdong, China