BTA-801 - Remote control SONY - Free user manual and instructions

Product Type	Remote Control
Model	BTA-801
Brand	Sony
Dimensions (approx.)	200 x 55 x 22 mm
Weight (with batteries)	120 g
Power Supply	2 x AAA batteries (1.5 V)
Battery Life (approx.)	12 months (typical use)
Transmission Type	Infrared (IR)
Operating Range	Up to 7 m (direct line of sight)
Compatible Devices	Sony TV, audio systems, Blu-ray players (select models)
Main Functions	Power, Volume, Channel, Input, Menu, Navigation, Mute, Numeric keys
Number of Buttons	38
Material	ABS plastic
Color	Black
Cleaning & Maintenance	Wipe with a soft, dry cloth. Do not use liquids or cleaners.
Safety Precautions	Do not expose to moisture or extreme temperatures. Remove batteries if not used for long periods.
Spare Parts & Repairability	Batteries only. No user-serviceable parts. Contact Sony support for issues.
General Information	Supports up to 3 Sony devices with pre-programmed codes. Programmable via manual setup.

Frequently Asked Questions - BTA-801 SONY

How do I pair the Sony BTA-801 remote with my TV?

The BTA-801 is an infrared remote control. No pairing required. Ensure direct line of sight and insert fresh batteries. If not working, set up the device code manually.

What batteries does the BTA-801 use?

It uses two AAA alkaline batteries (1.5 V). Insert them with correct polarity (+/-).

What is the operating range of this remote?

The infrared range is up to 7 meters (23 feet) within a 30-degree angle from the receiver.

How do I replace the batteries?

Slide the back cover off in the direction of the arrow. Replace with two new AAA batteries. Ensure correct polarity and close the cover.

Why is my remote not working?

Check if batteries are dead or inserted incorrectly. Ensure no obstacles between remote and device. Verify the device is powered on and compatible.

Can I use this remote for non-Sony devices?

The BTA-801 is designed for Sony devices. It may not work with other brands unless they support Sony IR codes.

How do I clean the remote?

Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture inside.

Does the remote have a backlight?

No, the BTA-801 does not feature a backlight. Buttons are not illuminated.

How do I set up the remote for my specific Sony device?

Refer to the manual for code setup. Typically, you press and hold the 'Setup' button, enter the device code, and test. Codes are listed in the manual.

What should I do if a button is stuck?

If a button sticks, try gently tapping the remote. If unresponsive, remove batteries, press all buttons to release debris, and clean. If persistent, contact support.

USER MANUAL BTA-801 SONY

Portable Tuner Mount Adapter

BIA-801

Operating Instructions

Thank you for your purchase.

A. Lung

Operating Instructions

Before operating the unit, please read the manual thoroughly and retain it for future reference.

2198KlyKm,Eqneas

Warning

For the customers in the U.S.A.

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this device.

For the customers in Canada

The Class II program apparatus means all requirements of the

Covender Interactions-Coupling Equipment

The BTA-901 Parallel Tube Mount Adapter is designed for the WRR 855A UHF Spilled Seal Tube Unit with Bevacine series Conductor equipped with DC 12V OUT 00018201.

Weatherproof structure

By properly mounting in: WRB-325A UHP Synthesized Tone Unit to the BTA-501, a well-limped structure is obtained.

Compact and lightweight

Using the WBR 855A in combination with the BTA 801 provides a highly reliable portable diversity tensor.

Specifications

Input table 10.1-17×12/4812

Power supply DC7V

Rated current 20mA, sine 14MP

Operating temperature 4°C to 1.5°C

65% 17.2% 17.2% 17.2%

40:32:567-10 5698(0.0)

Modori Ding (C)

Light voltage DC 10kV-17 V (12 V on indoor)

Chape Voltage Local current

Operating temperature (°C) = 50°C (2°F) - 12°F

Storage temperature 20°C to 150°C (4°F) 140°F

Cheese. Mikol Diaggio

(2) i × S i⁰ × 1_i⁰ inches

Man. Increasing preexisting pass Actions: 100% (3-4)

Supplied resources DE researchable (1)

Birding head cover (MAX) (2)

Burning lead section (M2×0.12)

Vermacy booklist (1)

Design and specifications are subject to change without. notice.

Contact an column power supply DC 20 (17 V) on: There are only the supplied DC power cells.

Note

26 hrs to check the opening voltage and potentially start connecting to a power source.

② Betacam attachment knob

Used to attach the camera to a tripod. For attaching the camera and any accessories between, set the same to the

viger

⑤ OUTPUT connector (OLR 3-pin, male)

Suppress the signals of the WIKK-SSCE. You can be taken, this to the microphone signal connector of a Beavan, mouse, tape recorder or other similar equipment.

H4p

When connecting to a radio unit which has a Parisson powering capability for microphones, it is recommended to use the receiver with the Parisson power (CT).

1.2014年

(1) 2017年1月1日

[Non-Text]

[Unreadable]

Ⅲ. ⑩ 24

1. 20

[Unreadable]

Therefore, m = 3/2

1.9M

Mounting the WRR-855A

By properly returning the WRR-855A to the HTX-501 and

tracking the two applied ammeters, a weatherproof

Before mounting, clean the shorting surface of the WRR-855A and the BTA-501.

Mounting procedure

1. Observing the direction, insert the WRR-855A into the BTA-501.

2. Push the WRR-855A until the accessory connector clicks into place.

3. Tighten the four mounting screws gradually and evenly to secure the unit, then tighten them fully.

Attaching and Connecting to a Betacam

Attaching and Connecting to a Betacam

3

Connect the output cable recently

Connect the DC 12 V IN connection to the DC OUT converter of a Breakdown center Converter using the supral DC power cable.