BPS-E452 - Loudspeaker BLAUPUNKT - Free user manual and instructions
Find the device manual for free BPS-E452 BLAUPUNKT in PDF.
| Product Type | Portable Bluetooth Speaker |
| Brand | Blaupunkt |
| Model | BPS-E452 |
| Speaker Type | 2.0 Stereo System |
| Connectivity | Bluetooth 5.0, AUX-In, USB |
| Bluetooth Range | 10 meters |
| Output Power | 10W RMS (2 x 5W) |
| Frequency Response | 80 Hz - 20 kHz |
| Impedance | 4 Ohm |
| Driver Size | 2 x 2.5" full-range drivers |
| Battery Type | Lithium-ion rechargeable, 1500 mAh |
| Battery Life | Up to 6 hours at medium volume |
| Charging Time | Approximately 3 hours |
| Power Source | DC 5V via Micro USB |
| Dimensions (W x H x D) | 200 x 100 x 80 mm |
| Weight | 0.5 kg |
| Material | Plastic enclosure with fabric grille |
| Water Resistance | IPX5 (splash-proof) |
| Color Options | Black, Blue, Gray |
| Included Accessories | USB charging cable, 3.5mm AUX cable, user manual |
| Control Type | Buttons on top: Power, Volume +/-, Play/Pause, Bluetooth |
| Compatibility | Smartphones, tablets, laptops, TV |
Frequently Asked Questions - BPS-E452 BLAUPUNKT
User questions about BPS-E452 BLAUPUNKT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Loudspeaker in PDF format for free! Find your manual BPS-E452 - BLAUPUNKT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BPS-E452 by BLAUPUNKT.
USER MANUAL BPS-E452 BLAUPUNKT
| Species Group: Zhang 5, Zhang 2, Zhang 5.5 Zhang |
| Sweet fruit: Lin (Jan 1), Zhang 1, Jin (Jan 9), Jin (Jan 7), Jin (Jan 6), Jin (Jan 5), Jin (Jan 4), Jin (Jan 3), Jin (Jan 2), Jin (Jan 1), Jin (0) |
| Sandy (Lin): 8428 |
| Cantana (Pentang, Hanching, Larch) |
| Kananga (Pentang, Hanching, Larch) |
| Huangeng (Kangyu, Hengyuan, Yi) |
| Reda-Pawra (Huang, Huang) |
| Riya (Pawra, Hengyuan, Yi) |
| Lira (Pawra, Hengyuan, Yi) |
| Lira (Pawra, Hengyuan, Yi) |
| Lira (Pawra, Hengyuan, Yi) |
| Lira (Pawra, Hengyuan, Yi) |
| Lira (Pawra, Hengyuan, Yi) |
| Lira (Pawra, Hengyuan, Yi) |
| Rubber |
| pp |
| Balance Date |
| PCT |
| Yes |
| 0 |
| 1.814-26mm |
| 1.1021-25mm |
| 4.571-116mm |
| 80~2000HZ |
| 84dB |
| 20W |
| Rubber | |
| Balance Dome | PP |
| Balanced Dome | PT |
| Neodymium | Yes |
| 1.6514 ZrNi | 0 |
| 1.1021 ZrNi | 1.6514 ZrNi |
| 4.8811 1ZrNi | 4.8811 1ZrNi |
| 55-2000HZ | 84.5ZB |
| 20W | 20W |
| 70W | 88.5dB |
| 35W | 55-20000HZ |
| 5.59m 14mm | 1.26m 32mm |
| 0 | 228m 55mm |
| Neodymium | PEI |
| V _5 | |
| Balanced Dome | Carbon Fiber |
| Rubber |

BP Americas Corp. 9590 NW 40th St Road Doral, FL 33178
X-Series BPS-X6520 X-Series BPS-E452, BPS-E552, BPS-E652 E-Series
2 Way Car Speaker System
BLAUPUNT
WIRING / CABLEADO:

Blaupunkt Speaker wired to a single channel Total Impedance: 4 ohms x channel
Blaupunkt Speakers wired in parallel to a single channel Total Impedance: 2 ohms x channel
NOTE: BLAUPUNKT strongly recommends that you operate your system at low volume levels prior to the complete installation of your BLAUPUNKT speakers.
CAUTION: Make sure that all of the speaker wiring is fully protected from cuts, tears or possible wear. Any short circuit caused from cuts, tears or wears, could severely damage the source unit or amplifier. Make sure all speaker wires easily reach the speaker terminals with no stress on the wires or connectors.
IMPORTANT: Never cut any metal that is an integral part of the vehicle's safety or structural support system. If you are unsure of the importance of any components of your vehicle, it is recommended that you have your speaker professionally installed.
CHOOSING A LOCATION: It is always best to plan the complete installation prior to attempting to install any product. The routing of wires, power connections, and mounting location, should be planned first. As with any car stereo installation, all work performance should be checked throughly and carefully prior to the operation of the system.
BLAUPUNKT Speakers are designed to fit in almost any factory location. If at all possible, it is recommended that you use factory locations. This applies mostly to later model cars. For those earlier model cars, that do not have factory location or are limited to just front speakers, it is recommended that you choose a location with a sufficient amount of air space.
If there's not enough air space, the woofer of the speaker may not reproduce low frequencies very well. It is recommended to mount the speakers in the door panels, kick panels, rear deck, etc. Ideally, the speakers should be mounted where it will be in an enclosed airspace. This allows for an extended bass response.