CK7330 - Digital alarm clock Emerson - Free user manual and instructions

Product Type	Clock Radio
Brand	Emerson
Model	CK7330
Dimensions (H x W x D)	3.5 x 6.0 x 5.5 inches (approx.)
Weight	1.2 lbs (approx.)
Power Source	AC 120V 60Hz
Backup Battery	CR2032 (for time/alarm backup)
Display Type	LED, adjustable brightness
Alarm Functions	Dual alarm with radio or buzzer, snooze
Radio Bands	AM/FM
Sleep Timer	Yes, up to 90 minutes
Sound Output	Built-in speaker, mono
Controls	Rotary knobs and tactile buttons
Cable Length	5 feet (approx.)
Color Options	Black or silver (depending on region)
Maintenance	Wipe with dry cloth; avoid liquids
Safety Features	CE, FCC compliant; automatic shut-off if overheated
Spare Parts Available	Battery compartment, power cord (contact support)
Repairability	User-replaceable backup battery
Manual Included	Yes (English and French)

Frequently Asked Questions - CK7330 Emerson

How do I set the time on the Emerson CK7330?

Press and hold the Time Set button (usually labeled 'TIME' or 'CLOCK') until the hour digits flash. Use the Hour and Min buttons to adjust. Press Time Set again to confirm. Note: you may need to enter alarm setting mode first; refer to the manual for exact steps.

How do I set the alarm?

Press and hold the Alarm Set button (often labeled 'ALARM' or 'ALM'). The alarm time will flash. Use the Hour and Min buttons to set the desired time. Press Alarm Set again to save. Ensure the alarm switch (if present) is set to 'ON' or 'RADIO'/'BUZZER'.

Why doesn't the alarm sound?

Check that the alarm is enabled (the alarm indicator should be lit). Ensure the volume is not turned all the way down if alarm mode is set to radio. Also check that the backup battery is not dead; if AC power fails, the alarm may not sound without a working battery.

How do I set the radio station?

Press the Radio button to turn on the radio. Rotate the Tuning knob to scan for stations. For precise tuning, use the fine-tuning control if available. You can save presets by holding a preset number button (1-4) after tuning.

How do I adjust the display brightness?

Look for a Dim or Brightness button on the top or back of the unit. Press it repeatedly to cycle through brightness levels (usually High, Medium, Low, Off). Some models have a slider switch.

What type of backup battery does the CK7330 use?

It uses a CR2032 coin cell battery. This battery preserves time and alarm settings during a power outage. To replace it, open the battery compartment on the bottom of the unit (may require a small screwdriver).

How do I use the snooze function?

When the alarm sounds, press the Snooze button (often the largest button or labeled 'SNOOZE'). The alarm will stop for about 9 minutes and then sound again. You can repeat this multiple times. To cancel snooze, press the Alarm Off button.

Can I set two different alarm times?

Yes, the CK7330 supports dual alarms. Set Alarm 1 and Alarm 2 separately using their respective buttons. Each can be assigned to wake to radio or buzzer independently.

How do I clean the clock radio?

Unplug the unit. Use a soft, dry cloth to wipe the exterior. Do not use any liquids, sprays, or abrasive cleaners. For the display and buttons, a slightly damp cloth with water is okay, but wring it out well first.

Is the Emerson CK7330 energy efficient?

Yes, it has an energy-saving design. The display dims automatically or can be set to off. It meets Energy Star standards where applicable. The unit uses very little power (less than 5W in active mode).

USER MANUAL CK7330 Emerson

LOCATION OF CONTROLS AND INDICATORS

1.) HOUR Button.
2.) ALARM Set/Reset Button.
3.) SNOOZE Button.
4.) TIME Button.
5.) SLEEP Button.
6.) MINUTE Button.
7.) Speaker.
8.) VOLUME Control.
9.) Back-Up Battery Compartment.

(Back Cabinet)

10.) Function Selector Switch.

(BUZZER/AUTO/ON/OFF)

11.) ALARM "On" Indicator.
12.) PM Indicator.
13.) Clock Display.
14.) BAND SELECTOR (FM/AM).
15.) Dial Pointer.
16.) AC Power Cord.
17.) TUNING Control.

POWER SUPPLY

AC power : 120V 60 Hz AC.

DC power : 9V battery type 006P (not provided) for clock back-up system only. An alkaline type battery is recommended. For optimum performance, this battery should be replaced every 6 months.

1.) Insert the AC power cord into a convenient standard AC wall outlet.
2.) Connect the 9V battery inside the compartment at the rear of the unit.

BACK-UP SYSTEM : Ensures that the unit will continue to operate as normal during an AC power disruption (in order to preserve the battery life the display will not light). All clock settings will be kept in the memory, however, the clock time may require adjustment for exact accuracy. If this battery is not installed, the display 42:00-blinks to indicate that you have to reset the time and alarm settings.

Visit our web site at www.emersonradio.com

SETTING THE TIME

1.) Press and hold the TIME button together with the HOUR and MINUTE buttons to adjust the time display. If the PM indicator is 'on', the time displayed is PM.
2.) Release all buttons when the correct time is displayed. The clock begins to run.

1.) Set the Function selector to the 'ON' position.
2.) Set the BAND SELECTOR switch to the AM or FM position.
3.) Rotate the TUNING knob to select the desired station.
4.) Rotate the VOLUME knob to adjust the volume level.
5.) When finished listening set the Function selector to the 'OFF' position.

For Better Reception

FM - Fully extend the AC power cord and adjust its direction and position.

AM - Rotate the entire unit until the internal AM antenna finds the strongest signal.

SETTING THE ALARM TIME AND WAKE UP MODE

1.) Press and hold the ALARM button together with the HOUR and MINUTE button to adjust the Wake-up Time display. If the PM indicator is 'On' the Wake-up time displayed is PM.
2.) When the desired Wake-up Time appears, release all buttons.
3.) To wake to the buzzer set the Function selector to the 'BUZZER' position. The ALARM indicator comes 'On'.
4.) To wake to Radio follow steps 1 - 4 in LISTENING TO THE RADIO above and then set the Function selector to the 'AUTO' position. The ALARM indicator comes 'On'.

STOPPING THE ALARM

The alarm will continue for 1 hour and 59 minutes.

a.) Press SNOOZE button to stop the alarm for 9 minutes, the alarm turns 'On' again.
b.) Press the ALARM button to stop the alarm for 24 hours. It will turn 'On' again at the same time on the following day.
c.) Set the Function selector to the 'OFF' position to shut off the alarm completely. The ALARM indicator goes 'Off'.

SLEEP TO MUSIC

Set the BUZZER/AUTO/ON/OFF switch to OFF position when you sleep to music, and to AUTO position when you sleep to music and wake up next morning.

1.) Press the SLEEP button. The display shows "59" and the radio begins to play. Select the desired band, station, and volume level.
2.) To increase the Sleep time by 1 hour, press the SLEEP and HOUR buttons together.
3.) To decrease the Sleep time, press the SLEEP and MINUTE buttons together. The display begins counting down. Release the buttons when the display shows the desired Sleep time.
4.) When the Sleep Timer counts down to "00" the radio shuts off automatically. To shut the radio off before the Sleep Timer reaches "00" press the SNOOZE button at any time.

CAUTION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION : To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer all servicing to qualified personnel.

The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of "dangerous voltage" inside the unit.

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

WARNING

- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

IMPORTANT

• Do not throw batteries in fire!
• The apparatus shall not be exposed to dripping or splashing.

IMPORTANT NOTES

This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty.

This radio should be connected to an AC outlet that is always 'live'. Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the battery back up system takes over to maintain the time and alarm settings. To maximize the life of the back up battery, keep the radio connected to a 'live' AC outlet at all times.

This radio uses a polarized AC plug which has one blade wider than the other. This plug will only fit into a polarized AC outlet. This is a safety feature. If the plug will not fit, you may have an older non-polarized AC outlet. Do not defeat the safety feature by trying to file the wider blade, or replacing the plug. Contact an electrician to replace your outdated outlet.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

LIMITED WARRANTY

Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of \$5.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. Send your unit to:

Emerson Radio Corp.

1901 Diplomat Drive,

Farmers Branch, TX 75234.

This warranty does not cover damage from negligence, misuse, abuse, accident, failure to follow operating instructions, commercial use, rental, repairs by an unauthorized facility, or products purchased, used, serviced or damaged outside of the United States.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AU898H

EMERSON

Part No.: 16-2917

404-02

Printed in China