VIDGL - Accessoire vidéo câblage Speco Technologies - Free user manual and instructions

Product Type	Security Camera
Model	VIDGL
Brand	Speco Technologies
Resolution	Up to 1080p (Full HD)
Lens	3.6mm fixed lens
Night Vision	Infrared LEDs, range up to 30 meters
Power Supply	12V DC, 1A
Dimensions (H x W x D)	150mm x 70mm x 70mm
Weight	0.5 kg (1.1 lbs)
Housing Material	Aluminum with weatherproof rating (IP66)
Field of View	90 degrees diagonal
Video Output	BNC / CVBS
Motion Detection	Built-in motion detection with alarm output
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Maintenance	Clean lens with a soft, dry cloth; avoid solvents
Safety	Use only the supplied power adapter; do not expose to rain
Spare Parts	Power adapter, mounting bracket, screw kit
General Information	This camera is compatible with Speco DVRs and analog systems

Frequently Asked Questions - VIDGL Speco Technologies

How do I install the VIDGL camera?

Mount the camera using the included bracket. Connect the BNC cable to your DVR and the power adapter to a 12V outlet. Adjust the angle for optimal view.

What type of cable should I use?

Use a standard RG59 coaxial cable with BNC connectors for video. For power, use the supplied 12V adapter or run separate power wires.

Does the camera work in complete darkness?

Yes, the camera has infrared LEDs that provide black-and-white night vision up to 30 meters in total darkness.

How do I set up motion detection?

Motion detection is configured through your DVR or recorder. In the settings, enable motion detection and define sensitivity and areas. The camera has a built-in alarm output.

What is the maximum distance for video transmission?

For analog video, you can run up to 300 meters (1000 feet) of RG59 coaxial cable without significant signal loss. Use a balun for longer distances.

The camera image is blurry. What can I do?

Check the lens for dust or condensation. Clean with a soft cloth. Also verify the focus ring (if adjustable) and ensure the camera is at the correct distance from the subject.

Can I use this camera indoors?

Yes, the camera is weatherproof (IP66) and can be used both indoor and outdoor. It is designed for all-weather operation.

What is the warranty for the VIDGL?

Speco Technologies typically offers a 2-year warranty. Check your purchase documentation or contact Speco support for details.

How do I reset the camera?

The camera does not have a reset button. Power cycle by unplugging the adapter for 10 seconds and reconnecting. For DVR-specific settings, reset via the DVR menu.

Can I connect this camera to an IP system?

The VIDGL is an analog camera. To use with an IP system, you need a video encoder or converter that converts analog to IP signal. It is not natively compatible.

USER MANUAL VIDGL Speco Technologies

Close-up of a black wireless audio jack with two coaxial connectors and a central connector (no visible text or symbols)

The VIDGL Video Ground Loop Isolator is a passive device which reduces ground loop interference within CCTV signals. The VIDGL is useful where a video signal is transmitted via cable between points with different ground potentials (typically caused by unbalanced power line loads.)

Features:

● BNC male to BNC male with 6" (15cm) mini cable on both sides.
● Package includes a BNC female to BNC female connector.
● Prevents video distortion caused by ground loops, as well as picture tearing, cross-talk and rolling.
● Prevents power cables from interfering with the CCTV installation.
● Built in TVS (Transient Voltage Suppressors) for surge protection.

View of Connection and Installation:

The VIDGL Video Ground Loop Isolator is intended to be installed where runs of video cable are known to have ground loops. It can be installed at either the camera or DVR side.

Note: Please confirm the correct Video Input/Output direction on the VIDGL.

★ Installation at DVR side:

graph LR
    A["Coaxial Cable"] --> B["VIDGL"]
    B --> C["Video Input Isolator Video Output"]

★ Installation at Camera side:

graph LR
    A["Device"] --> B["V1DGL"]
    B --> C["Coaxial Cable"]
    C --> D["Computer"]
    style A fill:#f9f,stroke:#333
    style D fill:#bbf,stroke:#333

Specifications:

Insertion Loss	0.5dB
Frequency Response	20Hz -10MHz (0~3dB)
Coaxial Input/Output Resistance	75 Ohm
Ground Isolation	>90dB @ >50Hz
Isolation Voltage	DC 600V (Min)
Insulation Resistance	100M Ohm
Transient Voltage Suppressors	12 Vrms
Dimensions L x W x H	2.9" x 1.1" x 0.8" with 6" x 2 Cable
Weight	0.2 Lbs.

RoHS CC FC

Speco Technologies is constantly developing and improving products.

We reserve the right to modify product design and specifications without notice and without incurring any obligation.

Speco Technologies • 200 New Highway • Amityville • NY • 11701 • www.specotech.com