B8701 - Office chair BOSS - Free user manual and instructions

Product Type	Office Chair
Brand	Boss
Model	B8701
Overall Dimensions (W x D x H)	62 x 62 x 110 cm
Seat Dimensions (W x D)	50 x 48 cm
Seat Height Adjustment	40 - 50 cm
Backrest Height	55 cm
Armrests	Adjustable in height and angle
Weight Capacity	120 kg
Base Material	Nylon, 5-star
Caster Type	Dual wheel, suitable for hard floors
Upholstery Material	PU leather
Filling Material	High-density foam
Net Weight	14 kg
Assembly Required	Yes
Recommended Usage	Home or office
Color Options	Black
Warranty	2 years
Certifications	BIFMA compliant
Additional Features	Lumbar support, tilt lock, headrest

Frequently Asked Questions - B8701 BOSS

How to assemble the BOSS B8701 office chair?

Follow the enclosed manual. Start by attaching the casters to the base, then insert the gas lift cylinder. Mount the seat onto the cylinder, and attach the backrest using the provided screws and Allen key. Ensure all bolts are tight.

How do I adjust the seat height?

Locate the lever under the seat, usually on the right side. Pull the lever while sitting on the chair to lower it, or lift your weight to raise it. Release the lever at the desired height.

How to adjust the armrests?

The armrests can be adjusted in height by pressing the button on the side and moving up or down. For angle adjustment, rotate the armrest pad to the preferred position.

What is the maximum weight capacity?

The BOSS B8701 office chair has a maximum weight capacity of 120 kg (265 lbs). Exceeding this limit may damage the chair and void the warranty.

How to clean the chair?

Use a soft, damp cloth with mild soap to clean the PU leather. Avoid abrasive cleaners or solvents. For mesh parts, vacuum with a brush attachment. Let it air dry.

Can the chair be used on carpet?

The included casters are designed for hard floors. On carpets, they may roll less smoothly. For carpet use, consider purchasing optional carpet casters.

How to tighten loose parts?

Periodically check all bolts, especially on the base, seat, and backrest. Use the provided Allen key or a screwdriver to tighten them. Do not overtighten.

Is this chair suitable for long hours of sitting?

Yes, the ergonomic design with lumbar support and adjustable features helps maintain comfort during extended sitting. However, take regular breaks to stand and stretch.

What tools are needed for assembly?

All necessary tools are usually included. Typically, you need an Allen key (provided) and possibly a Phillips screwdriver. Basic assembly is straightforward.

How to adjust the backrest tilt?

The backrest tilt can be adjusted using a lever or knob under the seat. Pull or turn to unlock the tilt, lean back to your preferred angle, then lock it. Some models also have tension adjustment.

USER MANUAL B8701 BOSS

This chair is only intended for sitting. Any other use will void the warranty.