Mole - Guitar effects pedal Electro Harmonix - Free user manual and instructions

Product Type	Compact Passive Audio Mixer
Brand	Electro Harmonix
Model	Mole
Inputs	4 x 1/4" TS Instrument Inputs
Outputs	1 x 1/4" TRS Mix Output, 1 x 1/4" TRS Tuner Output
Controls	4 Volume Knobs, 1 Master Volume
Dimensions	4.5 x 3.5 x 2 inches (114 x 89 x 51 mm)
Weight	0.8 lbs (363 g)
Power Requirement	Passive (no power needed)
Construction	Sturdy metal chassis
Special Features	High headroom, low noise, true bypass
Compatibility	Electric guitars, basses, keyboards, line-level sources
Accessories Included	None
Maintenance	Keep dry, clean with soft cloth, avoid solvents
Safety Precautions	Do not expose to moisture, avoid impact
Repairability	Modular design, accessible jacks and pots
Manual Language	English

Frequently Asked Questions - Mole Electro Harmonix

What is the Electro Harmonix Mole used for?

The Mole is a compact passive mixer designed to combine multiple instrument or line-level sources into one output, ideal for stage or studio use.

Does the Mole require batteries or external power?

No, the Mole is passive and requires no power source. It works purely through signal routing and attenuation.

Can I use the Mole with a microphone?

Microphones typically require preamplification. The Mole is best suited for line-level or instrument-level signals. For microphones, use a preamp first.

How many inputs does the Mole have?

It has four 1/4-inch TS inputs, each with its own volume control, plus a master output and a tuner output.

What is the tuner output for?

The tuner output provides a dedicated pass-through of the input signal unaffected by the master volume, ideal for connecting a tuner.

Can I use the Mole as a splitter?

The Mole is a mixer, not a splitter. Use the tuner output for a dry unaffected signal, but it won't split all inputs individually.

Is the Mole true bypass?

Yes, the Mole features true bypass switching, so when muted, your signal path remains pure.

What cables should I use with the Mole?

Use standard 1/4-inch instrument cables (TS for inputs/mono, TRS for the output if balanced).

How do I clean and maintain the Mole?

Wipe with a dry soft cloth. Avoid liquids and harsh cleaners. Keep away from dust and moisture.

What is the warranty on the Mole?

Electro Harmonix offers a one-year limited warranty against defects in materials and workmanship.

USER MANUAL Mole Electro Harmonix

Congratulations on your purchase of the The MOLE. The small enclosure insures a pedal board friendly fit while delivering a bass boost that is powerful and defined.

The MOLE is an Analog bass booster in a compact Nano pedal. It was specifically designed for the bass player who is looking for simple control that delivers a bass character that cannot be found in their bass or amplifier alone. Up to 20 dB of Bass frequency boost is possible allowing any bass to take on the character of numerous bass and amplifier combinations. It also works well with guitar to tailor a darker but musical tone from treble pickups. With a little experimenting you will see that The MOLE opens thunderous new horizons to your bass setup and a solid foundation on other instruments.

Plug your Instrument into the INPUT jack of your amplifier. Plug the DC adaptor into the 96DC-200 jack and then plug the DC adaptor into a wall outlet. The STATUS LED indicates when the effect is switched on. The MOLE comes provided with a 9 volt battery.

There are only two controls on The MOLE. The on/off footswitch engages and disengages The MOLE and the rotary Boost knob reacts like a specific frequency boost control. The single knob is really a preamp gain. The higher the Boost knob is turned up the more gain is applied ranging from a thickened bottom end to a powerful overdrive push to your amp. At the maximum setting you receive 20 dB of gain in the preselected 200 Hz bass frequency range (the boost stops at 400 Hz). Understanding the setup of between The MOLE and your amplifier is critical. When setting up for the first time, be careful with the Boost control. Experiment with the interaction of The MOLE and your amplifier at different settings. You will learn the settings that react best with your instrument. Once you understand the correct interaction between your instrument and amplifier you will see the huge and varied potential that The MOLE provides.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at [e-mail] or [phone]. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.

United States & Canada

EHX CUSTOMER SERVICE

ELECTRO-HARMONIX

c/o NEW SENSOR CORP.

47-50 33RD STREET

LONG ISLAND CITY, NY 11101

Tel: [phone]

Email: [e-mail]

Europe

JOHN WILLIAMS

ELECTRO-HARMONIX UK

13 CWMDONKIN TERRACE

SWANSEA SA2 0RQ

UNITED KINGDOM

Tel: [phone]

Email: [e-mail]

This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased.

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at [e-mail]

FCC COMPLIANCE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules.