Summer Infant Safe Surround 95310 - Baby product

Safe Surround 95310 - Baby product Summer Infant - Free user manual and instructions

Find the device manual for free Safe Surround 95310 Summer Infant in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Summer Infant Safe Surround 95310 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Baby Monitor
Brand Summer Infant
Model Safe Surround 95310
Dimensions (Parent Unit) 3.5 x 2.0 x 5.5 inches
Dimensions (Baby Unit) 4.0 x 2.5 x 5.0 inches
Weight (Parent Unit) 0.35 lbs
Weight (Baby Unit) 0.4 lbs
Power Source AC adapter (included) for both units; rechargeable battery in parent unit
Battery Life (Parent Unit) Up to 4 hours
Display 2.8 inch color LCD
Camera Resolution 720p
Night Vision Automatic IR LEDs, range up to 15 feet
Audio Two-way talk, volume control, sound activation LEDs
Range Up to 800 feet (open air)
Temperature Sensor Yes, displays room temperature on parent unit
Additional Features Lullabies, nightlight, zoom, pan/tilt (manual)
Cleaning Instructions Wipe with dry cloth; do not use liquids or cleaners
Safety Certifications FCC, UL listed
Warranty 1 year limited
Included Accessories Camera unit, parent unit, 2 AC adapters, user manual

Frequently Asked Questions - Safe Surround 95310 Summer Infant

How do I set up the baby monitor?
Plug in both units using the included AC adapters. The parent unit will automatically sync to the baby unit. Ensure they are within range (up to 800 feet open air).
Can I use the monitor without an AC adapter?
The baby unit requires constant AC power. The parent unit has a rechargeable battery for portable use, but must be charged via AC adapter before first use.
How do I enable night vision?
Night vision activates automatically in low light. The IR LEDs are invisible to the human eye. You can also manually turn it off in the menu if desired.
Why is the parent unit beeping?
Common causes: low battery, out of range, or the baby unit lost power. Check the battery level icon, move closer to the baby unit, or ensure the baby unit is plugged in.
How do I clean the camera lens?
Use a soft, dry cloth to gently wipe the lens. Do not use any liquid cleaners or abrasive materials, as they may damage the lens.
Can I adjust the camera angle remotely?
This model has manual pan/tilt. You must physically adjust the camera lens at the baby unit. There is no motorized remote control.
How far does the range extend?
The range is up to 800 feet in open air. Walls and obstacles can reduce this significantly. For best performance, keep the parent unit within 150 feet indoors.
Is the monitor hack-proof?
This monitor uses a proprietary wireless connection and is not connected to the internet, making it secure from remote hacking. However, always follow basic security practices like keeping the monitor within your home.
What lullabies are available?
There are 4 pre-installed lullabies: Brahms' Lullaby, Twinkle Twinkle Little Star, Rock-a-Bye Baby, and a nature sounds white noise. You can play them from the parent unit or set a timer.
How do I replace the parent unit battery?
The battery is built-in and not user-replaceable. If the battery no longer holds a charge, contact Summer Infant support for repair or replacement options.

User questions about Safe Surround 95310 Summer Infant

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Baby product in PDF format for free! Find your manual Safe Surround 95310 - Summer Infant and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Safe Surround 95310 by Summer Infant.

USER MANUAL Safe Surround 95310 Summer Infant

To Attach Changing Pad to a Dresser or Changing Table
Summer Infant Safe Surround 95310 - 1

Position your new Changing Pad with the fastening strap to the back of the changing surface, ensuring it does not hang over any edge. (Notes: Changing surface must be at least 16 in x 32 in). With the Changing Pad in position, attach the fastening strap to the back of the table or dresser using the 12 in wood screw included. (See diagram 1.) (Note: Periodically check the fastening strap to ensure it remains tight and securely attached to the table or dresser).

To Use Changing Pad
Summer Infant Safe Surround 95310 - 2

When placing infant on the changing pad (on their back) bring the safety strap around from both sides of the pad to align over child's abdomen and buckle securely. (See diagram 3.)

To tighten the safety strap around your child, pull the loose end of the safety strap away from the buckle.

Summer Infant Safe Surround 95310 - 3

To remove the pad from the table or dresser, open the buckle and pull the fastening strap through to release the pad. When replacing the pad, thread the fastening strap through the buckle until the pad is back in the desired position and close the buckle ensuring it is tight. (See diagram 2.)

Summer Infant Safe Surround 95310 - 4

To release the safety strap, simply squeeze the buttons together on both sides of the buckle. (See diagram 4.) Never leave child unattended when using your Change Pad. Always keep one hand on the child to prevent falling.

To Disassemble Changing Pad for Washing
Summer Infant Safe Surround 95310 - 5

Remove the changing pad from the quick release buck if attached to a dresser.
To remove pad from frame:
Step 1: on one end of frame, push the four pins (2 on each side) in and remove the frame from the 4 metal rails.
Note: Should a pin be too difficult to depress with your finger; use a key, a pen, a small screwdriver or similar tool.
Note: Should a pin shift out of position, push or pull the pin with tool noted above to realign into hole.
Step 2: Slide pad off from metal rails.
Step 3: Before putting pad in washing machine, clip the restraints along the back of pad, and pull tight.

Summer Infant Safe Surround 95310 - 6

Summer Infant Safe Surround 95310 - 7

To Reassemble Changing Pad
Summer Infant Safe Surround 95310 - 8

To re-assemble once pad is washed and air dried, reverse steps.
Step 1: Unclip buckle.
Step 2: Slide changing pad onto frame.
Step 3: Reattach extra sturdy frame to 4 rails, ensuring the 4 pins click into place.
Make sure to put legs on both right and then left sides, lining the poles up.

Summer Infant Safe Surround 95310 - 9

Summer Infant Safe Surround 95310 - 10

Summer Infant Safe Surround 95310 - 11

Putting an optional change pad cover on the pad:
Step 1: Cover the changing pad with optional cover.
Step 2: Pull safety straps through the pre-cut holes in your changing pad cover.
Note: Make sure the changing pad cover does not cover the anti-slip feet, and sits in the ridge right above the feet.

Summer Infant Safe Surround 95310 - 12

Summer Infant Safe Surround 95310 - 13

Summer Infant Safe Surround 95310 - 14

95310

Please read the following instructions and warnings carefully.

Keep this instruction manual for future reference.

Adult assembly required. For supports call 1,800,268,6337 or contact us at

For support call: 1 000 200 0257, of contact as the www.summerinfant.com/contact

For use with children from birth up to 30 lb.

Discontinue use when infant begins to push up

on hands and knees or can roll over.

Styles & colors may vary.

INSTRUCTION MANUAL
Safe Surround™
Changing Pad
Changing Pad 4-sided for added security 4-safety strap extra sturdy frame for better support fastening strap for added security anti-slip, non-scratch feet removable & machine washable cover

Summer Infant Safe Surround 95310 - 16
WARNING-FALL HAZARD:

To prevent death or serious injury, always keep child within arm's reach.

  • Never leave child unattended. Always keep one hand on baby while using this product.
  • Discontinue use of this product when child can push up on hands and knees or when child is able to roll over.
  • This pad is for use on a level, stable and structurally sound surface with a minimum dimension of 16 in x 32 in.
    Use of this pad on a smaller surface could result in death or serious injury to your child from falling.
  • Always secure this pad to the changing surface by correctly using fastening strap. See instructions.
    • Always use enclosed restraint system when using this pad.
  • Never use as a bed for sleeping.
  • Do not use changing pad if it is damaged or broken.
  • Make sure the changing pad cover does not cover the anti-slip feet, and sits in the ridge right above the feet.
  • Do not use with child over 30 lb.
    This changing pad meets ASTM F-2388 Standard Consumer Safety Specifications for Baby Changing Tables for Domestic Use.

Summer Infant Safe Surround 95310 - 17

Summer Infant, Inc.

T275 Park East Drive Woonsocket, RI 02895 USA

1-800-268-6237

Made in China.

Summer Infant Europe, Ltd.

Cleveland Road

Hemel Hempstea

HP2 7BW 0144 250 5000

06/14

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Summer Infant

Model : Safe Surround 95310

Category : Baby product