GX1-M - Hand dryer American Dryer - Free user manual and instructions

Product Type	Hand Dryer
Brand	American Dryer
Model	GX1-M
Dimensions (H x W x D)	10.5 x 7.5 x 4.5 inches
Weight	5 lbs
Power Supply	120V AC, 60Hz
Motor Power	1/4 HP
Air Speed	200 mph
Noise Level	70 dB
Sensor Activation	Automatic infrared
Drying Time	Adjustable (10-30 seconds)
Filter Type	Washable mesh
Mounting	Surface mount with included bracket
Material	ABS plastic cover, stainless steel back plate
Warranty	1 year limited
Safety Certifications	UL, cUL
Maintenance	Clean filter monthly; wipe exterior with damp cloth
Spare Parts Available	Yes – motor, sensor, PCB, heating element
Repairability	Modular design; replaceable components

Frequently Asked Questions - GX1-M American Dryer

How do I install the GX1-M hand dryer?

Mount the bracket to the wall using the provided screws, then attach the dryer. Ensure a grounded outlet is nearby. Refer to the installation manual for detailed steps.

What is the recommended maintenance schedule?

Clean the washable filter monthly to maintain airflow. Wipe the exterior with a damp cloth. Inspect the sensor lens for dust buildup.

Can the drying time be adjusted?

Yes, the drying time is adjustable via an internal dial. Typical range is 10 to 30 seconds. Consult the manual for location.

Why is my dryer not turning on?

Check power supply, reset breaker, and ensure the sensor is clear. If problem persists, the sensor or PCB may need replacement.

Is the GX1-M suitable for commercial use?

Yes, it is designed for high-traffic restrooms with a durable motor and automatic sensor for hygienic, touchless operation.

What is the warranty coverage?

American Dryer offers a 1-year limited warranty covering defects in materials and workmanship. Proof of purchase required.

How loud is the dryer?

The noise level is approximately 70 dB, comparable to a conversational voice. Some models may vary.

Can I replace the motor myself?

Yes, the motor is a replaceable component. Disconnect power, remove cover, unplug motor, and install new one. Follow safety guidelines.

Does the dryer have a heating element?

The GX1-M does not include a heating element; it uses high-speed air to dry hands. Some models may have optional warm air.

Where can I purchase spare parts?

Authorized dealers or directly from American Dryer. Common parts: motor (AD-MOTOR), sensor board (AD-SENSOR), filter (AD-FILTER).

USER MANUAL GX1-M American Dryer

1. Remove cover by removing (2) tamper proof-screws using security wrench supplied. Pull cover directly toward you. IMPORTANT: Save security wrench
2. Dryers should be placed at least 2 feet (61cm) apart and at least 12" (30cm) from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18" (46cm) above any projection which may interfere with the operation of the automatic sensor.

Hold the backplate to the wall at the suggested mounting height. Measure from bot-

tom edge of backplate to the floor (Ref. Dimension "A", Fig. 1):

CHILDREN

MEN WOMEN (depends on age) DISABLED

44" (112cm) 42" (107cm) 32 to 42" (81-107cm) 36" (91cm)

1. Mark the locations of the four mounting holes and the conduit entrance location on the
   wall. (The conduit entrance is the proper hole diameter for 1/2 inch (13mm) conduit.)
2. Fasten the backplate to the wall where previously marked.

RECOMMENDATION:

Wood wall - No. 14 (M6) wood screws, 2 3/4" (70mm) long

Cement or brick - 1/4" (M6) stud expansion bolts, 3" (76mm) long

Hollow wall - 1/4" (M6) toggle bolts, length depends on wall thickness

1. Run service wire to the dryer location and connect to lead wires.

IMPORTANT: All units must be supplied with 3 wire service. Use No. 12 or 14 wire as required by local electrical code. The ground wire must be connected to the dryer ground screw. Unit must be installed by a qualified licensed electrician.

CONNECT TO A DEDICATED CIRCUIT NOT TO EXCEED 20 AMPS.

Dryers located in shower rooms or other wet locations should be equipped with ground fault interrupter(s).

1. Carefully replace the cover using (2) tamper-proof screws supplied. Apply a bead of caulk around edges of cover to wall.

FIGURE 1 - DRYER MOUNTING

OWNER'S MANUAL GX SERIES HAND DRYERS

FOR INSTALLATION OR SERVICE

ASSISTANCE PLEASE CALL

[phone] OR

Email: [e-mail]

IMPORTANT: HAVE MODEL & SERIAL NO. READY

MODEL #____ SERIAL #

GLOBAL DRYER LIMITED WARRANTY

All parts of the GX-M/C models are warranted to the original consumer purchaser to be free from defects in material and workmanship for a period of five (5) years or three (3) years for GX models from the date of purchase from manufacturer. Sensor warranty three (3) years in the U.S.A. All models outside of the U.S.A., one (1) year including sensor. We will replace FREE OF CHARGE, during the warranty period, any warranted part which proves defective in material and/or workmanship under normal installation, use, and service, excluding normal wear. Replacement parts can be obtained by returning the part, TRANSPORTATION CHARGES PREPAID. You must notify factory prior to returning part or dryer. Any damage to this dryer as a result of misuse, abuse, neglect, accident, improper installation, unauthorized repairs, or any other use violative of instructions furnished by us, WILL VOID THIS WARRANTY. THIS LIMITED WARRANTY IS THE SOLE WARRANTY ON OUR PRODUCTS, AND WE DISCLAIM AND EXCLUDE ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. OUR LIABILITY SHALL NOT EXCEED IN ANY EVENT THE REPLACEMENT OR SALE PRICE OF THE ALLEGEDLY NONCONFORMING PRODUCT AND SHALL EXCLUDE LABOR CHARGES. TO THE EXTENT PERMITTED BY LAW WE SHALL NOT BE LIABLE FOR ANY LOSS, COST, EXPENSE, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER BASED UPON WARRANTY (EXPRESS OR IMPLIED), CONTRACT, NEGLIGENCE OR STRICT LIABILITY AND ARISING IN ANY WAY IN CONNECTION WITH THE DESIGN, MANUFACTURE, SALE, USE OR REPAIR OF THE PRODUCT.

GLOBAL DRYER

MFD by AMERICAN DRYER, INC.

33067 INDUSTRIAL ROAD, LIVONIA, MI 48150, U.S.A.

Telephone [phone] • Fax [phone]

www.americandryer.com • Email: [e-mail]

Revised November 2011

WARNING:

DISCONNECT POWER BEFORE INSTALLING

This dryer is activated by an infrared sensor. The dryer operates as long as hands are below nozzle. There is a maximum 60 second running time with a safety over-ride feature, if hands are not removed. Each component used in your dryer has been designed to provide years of trouble-free service. However, if trouble should develop, it can normally be located by visual examination. Removal or replacement of most parts, is simple and can be done without special tools.

IF THE DRYER WON'T TURN ON:

Check electrical service, circuit breaker. Make sure proper voltage is being supplied to the dryer. Check for loose or disconnected terminal to sensor. INCREASE sensitivity (FIGURE 3) by using a flat-blade screwdriver and CAREFULLY turning the adjustment pot located on the sensor CLOCKWISE 1/3 Turn MAX. If necessary, replace sensor.

IF DRYER WILL NOT SHUT OFF:

Make certain black foam is attached to lens and lens is clean. If damaged, replace. DECREASE sensitivity (FIGURE 3) by CAREFULLY turning the adjustment pot located on the sensor. Use a small flat-blade screwdriver. 1/3 Turn MAX. COUNTER-CLOCKWISE. If necessary, replace sensor.

IF COLD AIR IS COMING FROM THE NOZZLE:

Turn off breaker for 30 seconds to reset thermostat. If required, remove the cover and vent, check the heating element. If the element is broken or burned out, replace it.

IF NO AIR IS COMING FROM THE NOZZLE AND HEATING ELEMENT GLOWS:

Remove the cover and check to see that the fan revolves freely. Check and replace motor, if required.

FOR ANY OTHER PROBLEM, CONTACT FACTORY FOR ASSISTANCE.

CLEANING - DO NOT spray cleaning solvents thru dryer vents. DO NOT use abrasive, chlorinated, or highly alkaline cleaners. DO NOT use oil based cleaners.

SEMI-ANNUALLY remove the cover and clean all lint and dust from the mechanism, inside of cover, and plastic window.

Clean cover with a mild soap or detergent and warm water, using a soft cloth or sponge.

PARTS LIST FOR YOUR DRYER (Figure 2)

ITEM PART NO. DESCRIPTION

1 GX202 COVER, WHITE ABS

FIGURE 2 - EXPLODED VIEW