Madison 5064 - Wristwatch So & Co - Free user manual and instructions

Product Type	Watch
Brand	So & Co
Model	Madison 5064
Display Type	Analog
Case Diameter	36 mm
Case Thickness	8 mm
Band Width	18 mm
Weight	50 g
Water Resistance	3 ATM (splash resistant)
Power Source	Battery (SR626SW)
Battery Life	Approximately 2 years
Functions	Time, date, hour/minute/second hands
Crown	Pull-out for time and date adjustment
Case Material	Stainless steel
Crystal Material	Mineral glass
Band Material	Leather or metal (depending on variant)
Clasp Type	Buckle or deployment clasp
Maintenance	Wipe with soft cloth; avoid chemicals
Battery Replacement	Have replaced by a professional
Storage	Store in a dry place, avoid extreme temperatures

Frequently Asked Questions - Madison 5064 So & Co

How do I set the time on my So & Co Madison 5064 watch?

To set the time, gently pull the crown out to the second position (fully extended). Turn the crown clockwise or counterclockwise to adjust the time. Push the crown back in to secure. For watches with a screw-down crown, unscrew it first before pulling.

How do I change the date on the watch?

Pull the crown out to the first position (partially extended). Turn the crown clockwise to advance the date. Note: avoid setting the date between 9 PM and 3 AM to prevent damage to the date mechanism.

Is the Madison 5064 water resistant? Can I swim with it?

The watch has a water resistance rating of 3 ATM, meaning it can withstand splashes and brief immersion in water (e.g., washing hands). It is not suitable for swimming, showering, or diving.

What type of battery does the watch use and how long does it last?

The watch uses a SR626SW battery. Under normal use, the battery lasts approximately 2 years. Low battery may cause the second hand to move in two-second jumps.

How do I replace the battery?

Battery replacement should be done by a qualified watchmaker or jeweler to maintain water resistance and avoid damage. The back case must be opened carefully with appropriate tools.

How should I clean my So & Co watch?

Clean the watch case and crystal with a soft, lint-free cloth. For the band, use a slightly damp cloth for leather (avoid soaking) or a mild soap solution for metal bands. Do not use abrasive cleaners or solvents.

What should I avoid doing with my watch?

Avoid exposing the watch to strong magnetic fields (e.g., speakers, MRI machines), extreme temperatures, and shocks. Do not operate the crown when the watch is wet. Keep away from chemicals like perfumes and solvents.

How do I adjust the bracelet length?

If the metal bracelet is too long, refer to the adjustment pins on the links. Use a pin pusher to remove links. For leather straps, use the buckle holes. If unsure, consult a professional.

My watch is running fast or slow. What can I do?

Quartz watches are generally accurate. If it gains or loses significant time, the battery may be low or the movement may be affected by magnetism. Try demagnetizing with a demagnetizer or have it checked by a watchmaker.

Does the watch have a warranty?

So & Co watches typically come with a limited warranty covering manufacturing defects. Warranty duration may vary by retailer. Keep your purchase receipt and contact the point of sale for warranty claims.

USER MANUAL Madison 5064 So & Co

Some of our models are fitted with a screw-in crown. To use the setting functions, first UNSCREW the crown by turning it counter-clockwise until it slightly pops up from the watch body. The watch is now ready to be set according to the instructions. AFTER completing the setting, gently push the crown in, and then SCREW IT IN by turning it clockwise, until it is tight against the case of the watch. The crown MUST BE FULLY SCREWED IN for the watch to be water resistant.

WATCH DATE & TIME SETTING

Gently pull the Crown to this position, if the watch is fit with a Screw-down Crown, Unscrew the crown and then gently pull the crown.

CROWN POSITION 0 - HOME POSITION (FOR NORMAL USING)

CROWN POSITION 1 - DATE SETTING

• 1^st Click Position Rotate the Crown clockwise to set the Date.
  CROWN POSITION 2 - TIME SETTING
• 2 ^ND Click Position Rotate the Crown clockwise or anti-clockwise to set the hour, minute and 24hour hands to the desired time.
• Push the Crown back to the Crown Position 0.

DIAL TIME SETTING

DAY SETTING

• 2 ^nd Click Position Rotate the Crown Clockwise to set the Day.
• After the day has been set, push the crown back to the Normal Position.

24 HR SETTING

- This watch is designed to display the time in 24 Hr format. Rotate the Crown clockwise or anti-clockwise to set the time taking AM / PM into consideration.

DUAL TIME SETTIG

• Press button "A" to set the Dual Time hand forward in units of 15 minutes.
• Press button "B" to set the Dual Time hand back in units of 15 minutes.
• The Dual Time hand can be put rapidly by continuously pressing button "A" or "B".

WATER RESISTANT

Your New Watch is a water-resistant Watch.

Check the Marking on the back of the watch, find below the relevant usage recommendation.

* Water Resistant 3ATM or 30 METERS (100 Feet)

Shall withstand splashes of water while washing the hand. But should not be worn while swimming or diving.

* Water Resistant 5ATM or 50 METERS (165 Feet)

Suitable for showering or swimming in shallow water.

* Water Resistant 10ATM or 100 METERS (330 Feet)

Suitable for swimming, snorkeling, but should not be worn while scuba diving. We don't recommend swimming or diving with your watch unless it has a screw down crown and is water resistant to at least 10ATM or 100 Meters

GENERAL CARE FOR A WATER RESISTANT WATCH

DO NOT OPERATE ANY BUTTONS WHEN THE WATCH IS WET OR IN WATER
DO NOT WEAR THE WATCH IN A HOT SHOWER OR SAUNA EXTREME HEAT CAN DAMAGE THE WATCH
➢ AFTER USE IN SALT WATER OR CONTACT WITH SAND OR MUD, RINSE THE WATCH IN STREAM OF FRESH WATER AND DRY IT WITH SOFT COLTH.
LEATHER STRAPS ARE MORE EASILY DAMAGED BY FREQUENT EXPOSURE TO WATER. AFTER EVERY USE IN WATER, WIPE THE STRAP WITH A SOFT CLOTH, TO IMPROVE THE LIFE OF THE STRAP.