Tribeca 5056 - Wristwatch So & Co - Free user manual and instructions

Product Type	Wristwatch
Brand	So & Co
Model	Tribeca 5056
Movement Type	Quartz
Display Type	Analog
Case Material	Stainless Steel
Crystal Material	Mineral Glass
Water Resistance	3 ATM (splash resistant)
Case Diameter	40 mm
Case Thickness	10 mm
Band Material	Leather
Band Width	20 mm
Weight	80 g
Battery Type	SR626SW
Battery Life	Approximately 2 years
Functions	Hour, minute, second, date display
Clasp Type	Buckle
Care Instructions	Clean with soft cloth; avoid magnets and shocks
Safety Precautions	Keep away from strong magnetic fields; do not operate crown in water
Repairability	Battery replacement by jeweler; no user-serviceable parts
Warranty	Manufacturer warranty may apply

Frequently Asked Questions - Tribeca 5056 So & Co

How do I set the time on my So & Co Tribeca 5056?

Pull the crown out to position 2 (middle position). Turn the crown clockwise or counterclockwise to set the correct time. Push the crown back to position 0 (nearest case) to resume operation.

How do I change the date on the Tribeca 5056?

Pull the crown to position 1 (first click). Turn it clockwise to advance the date. Avoid changing the date between 9 PM and 3 AM to prevent damage to the movement.

How do I replace the battery in my So & Co watch?

We recommend having the battery replaced by a professional jeweler. The watch uses a SR626SW battery. Remove the back case carefully, replace the battery, and reseal the case to maintain water resistance.

Is the Tribeca 5056 waterproof?

It has a water resistance rating of 3 ATM, which means it can withstand splashes of water but not submersion or swimming. Avoid pressing the crown underwater.

What material is the crystal made of?

The watch features mineral glass crystal, which is scratch-resistant but not as hard as sapphire.

How should I clean my So & Co watch?

Wipe the watch case and band with a soft, dry cloth. For leather bands, use a damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.

What should I do if my watch stops running?

First, check if the battery is depleted. Replace the battery as described. If it still doesn't run, there may be a mechanical issue; consult a watch repair specialist.

How do I adjust the leather strap length?

Use a strap adjustment tool or visit a watchmaker. Most leather straps have holes and a buckle; you can add or remove links if it's not a leather band. The Tribeca 5056 typically uses a buckle clasp with fixed holes.

What type of battery does the Tribeca 5056 require?

It uses a SR626SW silver-oxide battery. Some equivalents are 377 or 626. Use a high-quality brand for best performance.

How often should I service my So & Co watch?

For a quartz watch, battery replacement every 2 years is generally sufficient. If you notice irregular timekeeping or moisture inside, have it serviced immediately by a professional.

USER MANUAL Tribeca 5056 So & Co

INSTRUCTION MANUAL - C3

VD31 - MULTIFUNCTION MOVEMENT

IMPORTANT NOTE REGARDING SCREW-IN CROWN Some of our models are fitted with a screw-in crown. To use the setting functions, first UNSCREW the crown by turning it counter-clockwise until it slightly pops up from the watch body. The watch is now ready to be set according to the instructions. AFTER completing the setting, gently push the crown in, and then SCREW IT IN by turning it clockwise, until it is tight against the case of the watch. The crown MUST BE FULLY SCREWED IN for the watch to be water resistant.

WATCH DATE & TIME SETTING

QUICK SETTING OF DATE:

CROWN POSITION 2:

- Gently pull the Crown to position 2.

- Turn the Crown clockwise to set the Date

- Push the Crown back to position 1.

Time Setting Position

CROWN POSITION 3:

- Genby Pull the Crown to positions. - Rotate the Crown to Set the desired

time.

- Push the Crown back to position 1.

CAUTION:

CAUTION:

• Make sure that AM/FM is correctly set by using the 24 hour hand as an AM/FM indicator. • DO NOT USE THE QUICK SETTING BETWEEN 21:00 HRS TO 01:00 HRS . AS IT MAY

- DO NOT USE THE COLOR SETTING OF DAMAGE THE MOVEMENT MECHANISM

(No text)

DIAL TIME SETTING

DUAL TIME OF 24 HOUR HAND SETTING:

1. Build the consensus to forward of a position

2. Pull the crown out to Second click, position 3

3. Pass button A or B to adjust Dual time. (To

- By pressing button A the hands move anticlockwise -1 hour.

- By pressing button B the hands move clockwise +1 hour.

- Press and hold the button, to move the hand rapidly.

1. Push the crown back to normal position.

WATER RESISTANT

Your New Watch is a water-resistant Watch.

Check the Marking on the back of the watch, find below the relevant usage recommendation.

* Water Resistant 3ATM or 30 METERS (100 Feet)

Shall withstand splashes of water while washing the hand. But should not be worn while swimming or diving.

^1 Water Resistant 5ATM or 50 METERS (165 Feet)

Water Resistant SATM of 50 METERS (165 Feet) Suitable for showering or swimming in shallow water.

• 2016, the following of considering an analysis:

* Water Resistant 10ATM or 100 METERS (330 Feet)

Suitable for swimming, snorkeling, but should not be worn while scuba diving.

We don't recommend swimming or diving with your watch unless it has a screw down crown and is water resistant to at least 10ATM or 100 Meters

GENERAL CARE FOR A WATER RESISTANT WATCH

➢ DO NOT OPERATE ANY BUTTONS WHEN THE WATCH IS WET OR IN WATER

➢ DO NOT WEAR THE WATCH IN A HOT SHOWER OR SAUNA EXTREME HEAT CAN DAMAGE THE WATCH

➢ AFTER USE IN SALT WATER OR CONTACT WITH SAND OR MUD, RINSE THE WATCH IN STREAM OF FRESH WATER AND DRY IT WITH SOFT COLTH.

LEATHER STRAPS ARE MORE EASILY DAMAGED BY FREQUENT EXPOSURE TO WATER. AFTER EVERY USE IN WATER, WIPE THE STRAP WITH A SOFT CLOTH, TO IMPROVE THE LIFE OF THE STRAP.