PLCMB20 - Rear Camera Pyle - Free user manual and instructions

Product Type	Rear View Backup Camera
Brand	Pyle
Model	PLCMB20
Video Input	Composite (RCA) to monitor
Image Sensor	1/3-inch CMOS
Effective Pixels	480 (H) x 320 (V)
Resolution	420 TV lines
Viewing Angle	120 degrees (diagonal)
Minimum Illumination	0.1 Lux
Night Vision	Built-in infrared LEDs
Power Supply	12V DC (negative ground)
Power Consumption	< 200 mA
Dimensions (Camera)	2.2 x 1.6 x 1.5 inches
Weight (Camera)	3.2 oz (90 g)
Mounting Type	Flush or surface mount
Waterproof Rating	IP68 (submersible)
Video Output	NTSC / PAL (auto select)
Parking Guidelines	Adjustable on-screen guidelines
Trigger Wire	Yes (reverse gear activation)
Operating Temperature	-20°C to 60°C
Maintenance	Clean lens with soft, dry cloth
Safety	Professional installation recommended
Compliance	FCC, CE
Warranty	1-year limited

Frequently Asked Questions - PLCMB20 Pyle

What is the video output type of the Pyle PLCMB20 camera?

The camera outputs a composite video signal via RCA, compatible with most aftermarket monitors and head units. It supports both NTSC and PAL formats.

How do I install the PLCMB20 rear view camera?

Mount the camera using the supplied bracket on your license plate or bumper. Connect the power lead to a 12V source such as the reverse light circuit (positive wire) and the black wire to ground. Route the RCA video cable to your monitor. Connect the red trigger wire to the reverse light positive for automatic activation.

Is the PLCMB20 camera waterproof?

Yes, it has an IP68 rating, meaning it is fully protected against dust and can be submerged in water up to 1 meter for 30 minutes.

Does the camera have night vision?

Yes, it features built-in infrared LEDs that provide clear visibility in low-light or complete darkness.

Can the parking guidelines be turned off?

Yes, the on-screen parking guidelines are adjustable. Some monitors allow you to disable them via settings. The camera itself may also have a switch to toggle guidelines.

What is the viewing angle of the PLCMB20?

The camera provides a 120-degree diagonal viewing angle, offering a wide view behind your vehicle.

Will the camera work with my existing monitor?

It works with any monitor that has a composite RCA video input. Ensure your monitor supports either NTSC or PAL (the camera auto-selects).

How do I clean the camera lens?

Use a soft, dry cloth to gently wipe the lens. Avoid harsh chemicals or abrasive materials that could scratch or damage the lens coating.

What is the warranty period for the Pyle PLCMB20?

Pyle offers a 1-year limited warranty against manufacturing defects. Keep your proof of purchase for any warranty claims.

Does the camera require professional installation?

While many users install it themselves, professional installation is recommended for reliable wiring and proper mounting, especially if you need to route cables through the vehicle interior.

USER MANUAL PLCMB20 Pyle

Close-up of a black rectangular camera with visible lens and mounting brackets (no text or symbols)

Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer's warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable installing the product. Prior to using and installing the Backup Camera System, please read the safety information provided in this user manual. Be sure to use the product as outlined in this user manual. Altercation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.

WARNING: Failure to read and follow these warnings and instructions may result in serious injury, including damaged property, so please pay close attention and exhibit the utmost care.

• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving conditions, obstructions, and large stationary objects. You, the driver, must also remember to drive safely and properly. Use of the Digital Backup Camera is not a substitute for safe, proper and legal driving practices.
• Never back up while looking only at your connected monitor display screen. You should always check behind and around the vehicle when backing up just as you would if the vehicle did not have the Digital Backup Camera. Always make sure your driving area is clear. Always back up slowly and with caution.
• Never depend on the Backup Camera entirely when backing up. The image on the monitor display screen may be slightly different from actual and real-time conditions. Objects viewed in the rear view monitor differ from actual distances because a wide-angle lens is used. So use the camera as an aid and always follow intended driving practices to properly judge distances from objects.
• The Backup Camera's assisted low lux lighting performance feature is also an aid to a driver. Always use your own eyes to confirm the vehicle's surroundings, as the displayed image may be not well lit or not entirely visible. Always proceed with caution and perform double-checks before proceeding.
• The area displayed by the Backup Camera is limited. It does not display objects that are close to or just below the bumper, underneath the vehicle, or objects out of the camera's view. The camera's view can change according to your vehicle's orientation on the road or changing road conditions.
• Be sure to check the camera is properly functioning, is properly positioned and securely mounted, every time you operate your vehicle.
• Make sure your trunk or hatch operates correctly, as intended, before and after installation.
• Proceed with caution when cleaning your vehicle around the camera. Avoid excess water exposure around the camera especially with spraying or a power washer.
• Please make sure to keep the camera clean and unobstructed from any debris
• Follow all traffic laws and motor vehicle regulations.
• Consult local laws and regulations for any restrictions on installation or use.
• Using a Backup Camera System is not adequate enough to completely eliminate a vehicle's blind spot. Always remember to drive with caution, following all traffic laws.

System Installation and Wiring

Note: Camera System installation on diesel vehicles may require a slightly different wiring install.

Caution: Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle. Refer to the model's power requirements prior to connection and installation.

Quick Installation:

This rearview backup camera system comes with camera and installation wiring. When installing, the camera is preferably to be mounted in the rear of your vehicle (just above the license plate).

This kit includes necessary wiring and cable connector accessories sufficient for typical connections. However, additional accessory cables and installation materials may be necessary for completely secure and operational backup camera performance.

Camera Connection:

Connect the camera to the using the included DC 12V power cable. Connect the DC 12V power cable to the positive 12V reverse tail light in the rear of your vehicle. Then, connect the black wire, of the DC 12V power cable, and ground properly. This connected power and ground cable then connects to the camera, and will supply power to the camera directly.

Next, use the included yellow RCA video connector cable, and run that cable from the yellow RCA video connector jack of the camera, to the yellow video connector of your compatible display monitor

The yellow RCA cable when connected, automatically retrieves the video signal when activated (when your vehicle is switched into the reverse gear).

Installation Transcript:

1. Locate the reverse taillight wiring behind your vehicle's reverse light. You may need to remove an interior panel, or other cover, in order to locate the wiring. Connect the included power 12V DC power cable to the reverse light.

a. Connect the power cable's Red wire to your vehicle's reverse light positive wire.
b. Connect the power cable's Black wire to your vehicle's reverse light negative wire.

1. Connect the camera to this 'reverse light' connection installation, then mount the camera in the desired location.

2. Run the RCA video cable from the camera to your compatible video display monitor.

*Please remember to run cables in the least obtrusive route possible. Vehicle vibrations and bumpy driving conditions can result, so extra care should be taken to securely mount the camera and fasten all cables and wiring to secure locations.
*Ensure the wires are safely and securely connected, with proper isolation applied to all connections.

Additional Notes:

• Determine the best location for the camera (The camera is preferably mounted just above the license plate).
• Be sure when running the connection cables to leave a small amount of slack so you can still move the camera around the license plate, if you decide to slightly adjust the camera's positioning at a later time.
• After installation, Test the camera before use. Placing your vehicle in reverse should provide a picture in the monitor within the rearview mirror assembly.

Model:

PLCMB20

graph TD
    A["Camera"] --> B["Vdeo"]
    B --> C["Display Monitor"]
    D["Fower"] --> E["Power Cable ...to vehicle's Reverse Lights"]
    F["Car"] --> G["Red Arrow"]
    style A fill:#f9f,stroke:#333
    style D fill:#ccf,stroke:#333
    style F fill:#cfc,stroke:#333