Q-Lion Q10 - Lighting Quasar Science - Free user manual and instructions

Product Type	LED Tubular Light
Brand	Quasar Science
Model	Q-Lion Q10
Dimensions	1000 mm x 50 mm (length x diameter)
Weight	1.5 kg
Power Source	AC adapter (100-240V) or V-mount battery (14.8V)
Power Consumption	40W max
Light Source	RGBWW LEDs
Color Temperature Range	3000K - 10000K
CRI	>95
Color Modes	RGBWW, CCT, Gel Presets, Effects
Control Methods	On-board buttons, DMX512, Wireless DMX, App via Bluetooth
DMX Channels	8 or 12 (configurable)
Mounting	5/8" receiver for stands, included yoke
Operating Temperature	-10°C to 45°C
IP Rating	IP20 (indoor use only)
Battery Compatibility	V-mount batteries (not included)
Accessories Included	AC adapter, power cord, DMX cable, yoke
Maintenance	Clean with dry, soft cloth. Do not use liquids or abrasives.
Safety	Disconnect power before cleaning. Do not stare at LEDs. Avoid moisture.
Spare Parts Available	Battery plate, power adapter, fuse, yoke
Repairability	Modular design; replaceable battery plate and control board

Frequently Asked Questions - Q-Lion Q10 Quasar Science

How do I power the Q-Lion Q10?

The Q-Lion Q10 can be powered via the included AC adapter (100-240V) or by attaching a V-mount battery (14.8V, not included). When both are connected, AC power takes priority.

Can I control the light wirelessly?

Yes, the Q-Lion Q10 supports Wireless DMX and Bluetooth for app control. You can use the Quasar Science app to adjust settings remotely.

What is the maximum battery life?

Battery life depends on the V-mount battery capacity and power settings. With a 150Wh battery at full output, expect approximately 2.5 hours of runtime.

Is the Q-Lion Q10 waterproof?

No, the Q-Lion Q10 has an IP20 rating, meaning it is suitable for indoor use only and not protected against water or dust. Keep it dry.

How do I mount the light?

The light comes with a yoke that has a 5/8" receiver, compatible with standard light stands. You can also mount it directly using the 1/4-20 threaded holes on the ends.

What color modes are available?

The Q-Lion Q10 offers RGBWW (red, green, blue, white, warm white), CCT (3000K-10000K), Gel Presets, and Effects (e.g., fire, police, lightning).

How do I reset the light to factory settings?

To reset, press and hold the Menu button for 10 seconds until the display shows 'RESET'. Confirm by pressing Enter. All settings will return to defaults.

Can I use DMX to control multiple lights?

Yes, the Q-Lion Q10 has DMX512 in/out via 5-pin XLR connectors. You can daisy-chain multiple lights and assign them different DMX addresses.

What is the CRI and why is it important?

The Q-Lion Q10 has a CRI >95, meaning it renders colors very accurately. High CRI is important for film and photography to ensure natural skin tones and color reproduction.

How do I clean and maintain the light?

Disconnect power before cleaning. Use a soft, dry cloth to wipe the housing and lens. Do not use any liquids, abrasive cleaners, or solvents, as they may damage the LEDs or electronics.

USER MANUAL Q-Lion Q10 Quasar Science

Abstract geometric pattern composed of nested triangles (no text or symbols)

QUASAR SCIENCE

Q-Lion

Rechargeable Lithium Ion Battery LED

Q5LS Q10LS Q20LS

Instructions

Operation:

• Press Power button once to turn on.
• Press Power button again to dim. Each button press dims to the next lower level. 100% 75% 50% 25% 10% 0%
• Double tap to turn off at any level.

- Press and hold Power button to change between 3000k and 5600k.

• Battery Level is shown with the indicator lights.
• Indicator lights will go to sleep after 10 seconds.
• Tap Power button once to wake and show battery level.

- To disable the Power Button when traveling, using a pen, press and hold the the KILL button button on the side for 5 seconds.

- To enable the Power Button after it has been killed, plug it into your charger.

- To Reset the lamp to default settings of 5600k and 100% , press the RST button.

Charging:

• The Q-Lion series V2.0 Lamp charges from a QC3.0 USB Charger rated 9V 2amp or 12V 1.5amp. The power light will flash if the charger is insufficient. (Lamp will not charge on a standard 5V USB charger.)
• The lamp cannot operate while charging.