WHT 09 Professional - Blowtorch BOSCH - Free user manual and instructions

Product Type	Professional Blowtorch
Brand	Bosch
Model	WHT 09 Professional
Fuel Type	Butane/Propane gas (refillable)
Flame Temperature	Up to 1300 °C (approx.)
Flame Control	Adjustable flame via rotary knob
Ignition	Piezo electric ignition (push-button)
Safety Features	Flame lock button, child safety lock, automatic gas shut-off
Weight	Approx. 350 g (without gas)
Dimensions (L x W x H)	200 x 60 x 110 mm
Gas Tank Capacity	Approx. 50 ml (refillable via standard butane can)
Continuous Burn Time	Approx. 60 minutes at medium flame
Power Output	Approx. 1.5 kW (thermal)
Primary Applications	Soldering, brazing, heat shrinking, thawing pipes, cooking (culinary)
Accessories Included	Nozzle protector, stand (user manual)
Maintenance	Clean nozzle with brush; check gas valve annually
Repairability	Spare parts available (igniter, valve, nozzle) via Bosch service
Certification	CE, UKCA

Frequently Asked Questions - WHT 09 Professional BOSCH

How do I refill the Bosch WHT 09 Professional blowtorch?

To refill, ensure the torch is off and cool. Turn the unit upside down and insert a butane gas canister nozzle into the gas valve. Press firmly for a few seconds until gas stops entering. Let it sit for 1 minute before use.

What type of gas does it use?

It uses standard butane or propane gas. Use high-quality refined butane for best performance. Do not use lighter fluid or other fuels.

How do I adjust the flame size?

Turn the rotary knob at the rear of the torch to adjust flame intensity. Turn clockwise to increase, counterclockwise to decrease. Always use the flame lock to maintain a steady flame.

Is the blowtorch safe for indoor use?

Always use in a well-ventilated area. Avoid flammable materials. The torch has a safety lock and automatic gas shut-off. Never leave unattended while lit.

How do I clean the nozzle?

After use, allow the torch to cool. Use the included cleaning brush to gently remove any carbon deposits from the nozzle tip. Do not use sharp objects that may damage the orifice.

What can I use this blowtorch for?

It is suitable for soldering copper pipes, brazing, heat shrinking tubing, thawing frozen pipes, starting charcoal grills, and culinary applications like crème brûlée.

Why does the flame go out after a few seconds?

This may indicate a low gas level, clogged nozzle, or faulty igniter. Refill the tank, clean the nozzle, and check the piezo igniter. If problem persists, contact Bosch service.

How do I store the blowtorch?

Store in a cool, dry place away from direct sunlight and heat sources. Ensure gas is used up or stored safely. Do not store with flammable materials.

Are replacement parts available?

Yes, Bosch offers spare parts such as igniter units, gas valves, and nozzle sets. Contact Bosch customer service or authorized dealers for genuine parts.

What is the warranty period?

The Bosch WHT 09 Professional comes with a standard 2-year warranty covering defects in materials and workmanship. Register your product online to extend warranty.

USER MANUAL WHT 09 Professional BOSCH

The right size clothing

Pay attention to these points:

A Chest measurement:

Put the tape measure horizontally around the widest part of your chest. This is used for jackets/combinations. Example: if your chest measures 102 cm, select a 104 cm jacket (always round measurements up). If you wear a pullover under the jacket, select the next size up, i.e. 112 cm.

K Measurement for low and normal waist height:

Put the tape measure horizontally around your waist.

L Hip measurement:

Put the tape measure horizontally around your hips.

E Leg length:

Measure from the crotch to the floor without wearing shoes. Normal 82 cm (32"), Long 90 cm (35").

Jackets, vest and shirts

Size S M L XL 2XL
A Chest measurement (cm)	92	100	104	112	116
A Chest measurement (inches)	36 39.5 41 44 45.5

Trousers and shorts

Size	C46	C47	C48	C49	C50	C51	C52	C54	C56	C58
K/L Waist size (cm)	78	80.5	83	85.5	88	90.5	93	98	103	108
K/L Waist size (inches, jeans size)	30	31	32	33	34	35	36	38	40	42
E Leg length (cm) 82	90
E Leg length (inches, jeans size)	32					35

When measuring trousers, the leg length E and the waist size are put together to form a combined size.
For example, leg length E=82 and waist size K/L=78 results in a combined size of 82C46

Shoes and boots

Size
EU	40	41	42	43	44	45	46
UK	612	7	8	9	10	1012	11

Heated outdoor jacket

for work and leisure

The right size clothing -

Pay attention to these points:

A Chest measurement: Put the tape measure horizontally around the widest part of your chest. Example: if your chest measures 102 cm, select a jacket with chest measurement of 106 cm (always round measurements up). If you wear a pullover under the jacket, select the next size up, i.e. a jacket with chest measurement of 112 cm.

B Height / Back length: Put the tape measure vertically from your neck to your coccyx.

Arm length: Put the tape measure from your wrist to your shoulder.

Heat+ Jacket 10,8 Volt Professional Men's version

		SMLXLXXL3XL
A	Chest measurement in cm	92	100	104	112	116	124
B	Height / Back length in cm	73	74	76	76	80	80
C	Arm length in cm	64	65	66	67	68	70

Heat+ Jacket 10,8 Volt Professional Ladies' version

		XSSMLXL
A	Chest measurement in cm 78 84 90 96 102
B	Height / Back length in cm 72 73 73 75 76
C	Arm length in cm 59 60 61 62 63