SC-KS57P32 - Kitchen scale Scarlett - Free user manual and instructions

Product Type	Kitchen Scale
Brand	Scarlett
Model	SC-KS57P32
Dimensions (approx.)	20 x 15 x 2 cm
Net Weight (approx.)	250 g
Power Supply	1 x CR2032 lithium battery (included)
Maximum Capacity	5 kg / 11 lb
Accuracy (Division)	1 g / 0.1 oz
Units of Measurement	g, oz, lb:oz
Tare Function	Yes (zero reset)
Auto-Off	Yes (after 2 minutes of inactivity)
Overload Indicator	Yes ("O-Ld" display)
Low Battery Indicator	Yes
Platform Material	Stainless steel
Housing Material	ABS plastic
Display Type	LCD (backlit)
Recommended Cleaning	Wipe with damp cloth; do not immerse
Safety Features	Overload protection, auto-off
Spare Parts Available	Battery, user manual (download)
Repairability	Not user-serviceable; contact support

Frequently Asked Questions - SC-KS57P32 Scarlett

How do I turn on the Scarlett SC-KS57P32 kitchen scale?

Press the ON/OFF button on the top or front panel. The scale will power on and display zero.

How do I replace the battery in this scale?

Open the battery compartment on the underside, remove the old CR2032 battery, insert a new one with the correct polarity (+ up), and close the compartment.

How do I clean the Scarlett SC-KS57P32?

Wipe the stainless steel platform and body with a soft damp cloth. Do not use abrasive cleaners or immerse the scale in water.

How does the tare function work?

Place a container on the scale, press the TARE button to reset the display to zero, then add ingredients. The net weight will be shown.

What is the accuracy of the Scarlett SC-KS57P32?

The scale has a division of 1 g (or 0.1 oz), meaning it can measure to the nearest gram.

How do I switch between units?

Repeatedly press the UNIT button to cycle through grams (g), ounces (oz), and pounds/ounces (lb:oz).

What does 'O-Ld' mean on the display?

'O-Ld' indicates overload. The weight exceeds the maximum capacity (5 kg). Remove the excess weight immediately.

Does the scale turn off automatically?

Yes, the scale has an auto-off feature that powers down after approximately 2 minutes of inactivity to save battery.

What is the warranty period for this Scarlett scale?

Warranty details vary by region; typically Scarlett offers 1 year warranty. Check your local terms or contact retailer.

What should I do if the scale shows an error message?

If 'Err' or 'Lo' appears, replace the battery. If 'O-Ld' appears, remove weight. If unresponsive, reset by removing battery for 10 seconds.

USER MANUAL SC-KS57P32 Scarlett

• Please read all instruction manuals before use and save it for future references.
• For home use only. Do not use for industrial or commercial purposes.
• Oiling of inner mechanism is not needed.
• Do not shock the scale with sudden loading or striking.
• Do not overload the scale.
• Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
• If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
• Production date mentioned on the unit and/or on the packing materials and documentations.

OPERATING INSTRUCTIONS START TO USE

• Open the battery compartment on the back side of the scale. Remove the safety film. The scale is ready for operation.
• Place the scale onto a flat hard horizontal surface. Do not place the scale on soft surfaces.
• Press «ВКЛ./ТАРА» button to turn on the scale.
• Wait for a few seconds for the display to show a «0».
• Place the product onto the scale; the scale will indicate the weight of the product.
• On the back side of the scale, there is a unit of measure switch. Use it to set the units of measure: grams (g) or kilograms (kg), pounds (lb) ounces (oz), milliliters water (ml water), milliliters milk (ml milk).
• To weigh the products successively without removing them from the scale, press the «ВКЛ./ТАРА» button to set the scale to a zero before adding the next product.

AUTOMATIC SWITCHING OFF

- If the display shows «0» or the same weight reading for 2 minutes, the scale will automatically turn off.

OVERLOAD INDICATOR

- When the scale is overloaded, the display shows «EEEE».

BATTERY REPLACING

- Replace the battery when the display shows «Lo».

MAINTENANCE AND CARE

- Wipe the scale with a soft cloth and cleaner, and then dry it.

- Do not use any organic solvents, aggressive chemicals and abrasives.

STORAGE

- Complete all requirements of chapter MAINTENANCE AND CARE.

- Do not put anything on scale when not in use.

- Keep the scale in a dry cool place.

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units and battery's should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.

For additional information about actual system of the garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.