AX-NIS24SWC-6V - Car Audio/Video Interface Metra - Free user manual and instructions

Product Type	Car Audio/Video Interface
Model	AX-NIS24SWC-6V
Brand	Metra
Compatible Vehicles	Nissan models with 24-pin connector and SWC (Steering Wheel Control) support, 6V signal
Dimensions (approx.)	3.5 x 2.5 x 1.0 inches (89 x 64 x 25 mm)
Weight (approx.)	4.2 oz (120 g)
Power Supply	12V DC vehicle electrical system (via harness)
Power Consumption	< 1W standby, < 5W active
Main Functions	Retains factory steering wheel controls, provides RCA outputs for aftermarket radio, supports navigation and audio integration
Inputs	Factory radio harness (24-pin), SWC wire, 12V power, ground, accessory
Outputs	RCA preamp outputs (front, rear, sub), SWC output to aftermarket radio, optional AUX input
Installation Type	Plug-and-play with included wiring harness; no cutting required
Maintenance	Keep dry and clean; wipe with a soft, dry cloth if needed. No user-serviceable parts inside.
Safety	Disconnect vehicle battery before installation. Do not expose to moisture or extreme temperatures.
Spare Parts & Repairability	Wiring harness and mounting brackets available as spare parts. Repair should be done by qualified technicians; no user repair possible.
Certifications	CE, RoHS compliant
Package Contents	Interface module, wiring harness, installation manual
Warranty	1 year limited warranty

Frequently Asked Questions - AX-NIS24SWC-6V Metra

What does the Metra AX-NIS24SWC-6V do?

It is an interface that allows you to retain the factory steering wheel controls (SWC) and audio features when installing an aftermarket radio in select Nissan vehicles with a 24-pin connector.

Which Nissan models are compatible with this interface?

It is designed for Nissan models with a 24-pin factory radio connector and a 6V SWC signal. Common compatible models include Nissan Altima, Sentra, and Versa from certain years. Always verify your vehicle's specific connector and SWC voltage before purchase.

How do I install the AX-NIS24SWC-6V?

Installation is plug-and-play. Disconnect the negative battery terminal, connect the interface's harness between the factory radio and the aftermarket radio, and match wire colors. Follow the included manual for detailed step-by-step instructions.

Do I need to program or reprogram the interface?

No programming is required for most installations. The interface is pre-configured to work with compatible Nissan vehicles. However, some aftermarket radios may require SWC setup in their settings.

What does the LED on the interface indicate?

The LED typically indicates power status. A steady red light usually means the interface is receiving power. Refer to the manual for specific LED behavior.

Why are my steering wheel controls not working after installation?

Check that the SWC wires are correctly connected to the aftermarket radio's SWC input. Ensure the radio's SWC settings are configured to the correct type (often 'Metra' or 'Universal'). Also verify the vehicle's SWC voltage is 6V.

Can I use this interface with a non-Nissan vehicle?

No, the AX-NIS24SWC-6V is specifically designed for Nissan vehicles with a 24-pin connector. Using it with other brands may cause damage or improper operation.

What is the warranty period for this product?

Metra offers a 1-year limited warranty against defects in materials and workmanship. Proof of purchase is required.

Does the interface support navigation outputs?

Yes, it retains factory navigation features if your vehicle was originally equipped. It also provides RCA outputs for aftermarket navigation or audio systems.

How can I get technical support for this product?

Contact Metra's customer support at 1-800-221-0932 or visit their website for live chat. You can also consult the Metra Online Support Center for installation guides and troubleshooting.

USER MANUAL AX-NIS24SWC-6V Metra

Nissan (with NAV) 2011-up

INTERFACE FEATURES

• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
  • Retains the factory AUX-IN jack
• Retains the factory backup camera to an aftermarket radio*
• Includes the AX-CAM6V 12-volt to 6-volt converter
  * Will not work with models equipped with an "All Around Camera" system

INTERFACE COMPONENTS

- AX-NIS24SWC-6V harness • AX-CAM6V 12-volt to 6-volt converter

APPLICATIONS

NISSAN		Frontier 2013-up*		Rogue (w/ Bose)		Titan2013-2015*
Altima	2013-up	Juke 2011-2014*		2012-2013*		Versa	2013-up*
Cube		NV	2012-up*	Rogue	2011*	Xterra
	2011-2014*	NV200	2012-up*	Sentra	2011-up*		2013-2015*

* For use when retaining the OE backup camera only

TOOLS REQUIRED

• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

Installation Instructions for AX-NIS24SWC-6VIns

Connections to be made

• Connect the Black wire with a ring terminal to chassis ground.
• Connect the Black wire of the AX-CAM6V wire to chassis ground.
• Connect the Red wire labeled "Camera Power 6V" to the Blue/Red wire of the AX-CAM6V.
• Connect the Green/Purple wire to the reverse wire of the aftermarket radio, and also to the Blue/White wire of the AX-CAM6V.
• For all models except the Cube / Rogue, if retaining the factory AUX-IN jack, connect the Red & White RCA jacks to the AUX input.
• Connect the Yellow RCA jack to the rear camera input of the aftermarket radio.

12-pin pre-wired ASWC-1 harness:

This harness is to be used along with the optional ASWC-1 (not included) to retain steering wheel audio controls. Please refer to the ASWC-1 instructions for radio connections and programming.

Note: Disregard the harness that comes with the ASWC-1.

- Connect the unlabeled Red wire to the accessory wire.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

Axxess Integrate

axxessinterfaces.com

- metraonline.com ax

kessinterfaces@10359

Aceteseorlitegraten

REV. 10/14/16

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

REV. 10/14/16

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

460 WALKER STREET, HOLLY HILL, FL 32117-2699 • 800-221-0932 • AXXESSINTERFACE.COM

MADE IN CHINA

"WARNING: This product contains chemicals, including lead, known to the state of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling".

AX-NIS24SWC-6V

AX-NIS24SWC W 6VOLT CONVERT