KSX24XB30N - Air Conditioning Profilo - Free user manual and instructions

Product Type	Split Air Conditioner
Model	KSX24XB30N
Brand	Profilo
Cooling Capacity	24000 BTU (7.0 kW)
Heating Capacity	24000 BTU (7.0 kW)
SEER (Seasonal Energy Efficiency Ratio)	7.0
SCOP (Seasonal Coefficient of Performance)	4.8
Energy Class	A+
Refrigerant	R32
Power Supply	220-240V ~ 50Hz
Indoor Unit Dimensions (W x H x D)	1085 x 330 x 235 mm
Outdoor Unit Dimensions (W x H x D)	900 x 650 x 350 mm
Indoor Unit Weight	12 kg
Outdoor Unit Weight	40 kg
Noise Level (Indoor)	25-40 dB(A)
Noise Level (Outdoor)	55 dB(A)
Functions	Cooling, Heating, Dehumidification, Fan, Sleep Mode, Timer
Filter Cleaning Interval	Every 2 weeks
Recommended Room Size	60-70 m²
Installation	Professional installation recommended
Safety Features	Auto restart, overheat protection
Spare Parts Availability	Filters, remote control, main components (10 years)

Frequently Asked Questions - KSX24XB30N Profilo

How to clean the air conditioner filters?

Turn off the unit and unplug it. Open the front panel, remove the filters, and wash them with lukewarm water using a soft brush. Allow them to dry completely before reinstalling. Clean every 2 weeks for optimal performance.

What does the error code E1 mean?

Error code E1 typically indicates a temperature sensor fault. Check if the indoor unit's sensor is dirty or disconnected. If the problem persists, contact a qualified technician.

How to use the timer function?

Press the TIMER button on the remote control. Use the + or - buttons to set the desired time (0-24 hours). Press TIMER again to confirm. The unit will turn on or off automatically at the set time.

What is the recommended temperature for energy saving?

For cooling, set the thermostat to 24-26°C. For heating, set to 20-22°C. Each degree difference can save up to 6% energy. Use the ECO mode for additional savings.

How to switch between cooling and heating?

Press the MODE button on the remote control until the desired mode icon appears (snowflake for cool, sun for heat). The unit will start operating in that mode after a few seconds.

Why is the unit not cooling properly?

Check if the filters are dirty and clean them if necessary. Ensure doors and windows are closed. Verify that the thermostat is set lower than the room temperature. Also, check if the outdoor unit has sufficient airflow.

How to reset the remote control?

Remove the batteries from the remote control, wait 5 minutes, then reinsert them. Ensure the batteries are new and correctly oriented (+/-). If still not working, try replacing the batteries or contact support.

What maintenance does the outdoor unit require?

Keep the outdoor unit free from debris, leaves, and snow. Ensure at least 30 cm clearance around the unit for airflow. Periodically check the coils for dirt and clean them with a soft brush if needed.

Can I install the unit myself?

No, professional installation is strongly recommended due to the need for proper refrigerant handling, electrical connections, and drainage. Incorrect installation may void the warranty and cause safety hazards.

What is the refrigerant type and is it eco-friendly?

This unit uses R32 refrigerant, which has a lower global warming potential (GWP) compared to older refrigerants like R410A. It is more energy-efficient and environmentally friendly.

USER MANUAL KSX24XB30N Profilo