Vega - Lighting Vemer - Free user manual and instructions

Product Type	Indoor/Outdoor Lighting Fixture
Brand	Vemer
Model	Vega
Dimensions (L x W x H)	Approx. 12 x 12 x 8 inches (30 x 30 x 20 cm)
Weight	Approx. 2.5 lbs (1.1 kg)
Power Supply	120-240V AC, 50/60 Hz
Wattage	Max 60W (incandescent) or equivalent LED
Light Source	Compatible with E26/E27 base bulbs
Material	Aluminum housing with polycarbonate diffuser
IP Rating	IP44 (suitable for outdoor use)
Main Functions	Ambient lighting, energy-saving, durable
Installation	Ceiling or wall mount, hardwired
Maintenance	Wipe with dry cloth; do not use abrasive cleaners
Safety Certifications	CE, RoHS compliant
Spare Parts Availability	Replacement lenses and mounting brackets available from Vemer
Warranty	2 years limited warranty

Frequently Asked Questions - Vega Vemer

How do I install the Vemer Vega lighting fixture?

Turn off power at the circuit breaker. Connect the fixture wires (black to live, white to neutral, green to ground) using wire nuts. Secure the fixture to the ceiling or wall with the included screws.

What type of bulb does the Vega use?

The Vega accepts standard E26/E27 medium base bulbs up to 60W. LED or CFL equivalents are recommended for energy efficiency.

Is the Vega suitable for outdoor use?

Yes, the Vega has an IP44 rating, making it resistant to water splashes and dust. It can be used in covered outdoor areas.

Can I dim the light with a dimmer switch?

The fixture itself is compatible with dimmer switches, but you must use a dimmable bulb (LED or incandescent) for dimming functionality.

What is the recommended cleaning method?

Disconnect power. Wipe the exterior with a soft, dry cloth. For stubborn dirt, use a damp cloth with mild soap, then dry thoroughly. Avoid abrasive cleaners.

How long is the warranty period?

Vemer offers a 2-year limited warranty against manufacturing defects. Contact Vemer customer service for claim procedures.

Does the fixture include a bulb?

No, the Vega fixture is sold without a bulb. You must purchase a compatible bulb separately.

Can I replace the lens if it gets damaged?

Yes, replacement lenses are available as spare parts from Vemer or authorized dealers. Refer to the manual for removal instructions.

What is the maximum wattage I can use?

The maximum recommended wattage is 60W for incandescent bulbs or equivalent LED (e.g., 12W LED). Exceeding this may cause overheating.

Are there any energy-saving features?

The fixture itself is energy-efficient when used with LED bulbs. It also dissipates heat effectively to prolong bulb life.

USER MANUAL Vega Vemer

Not extractable emergency lamp, with installation on flush-mounting boxes that turns on in the event of a blackout to illuminate the environments where it is installed. Vega is small and compact and is supplied with the adapters that allow its installation with the plates of the main civil series.

1 Installation in flush-mounting box with a height of 45 mm
2 Terminals on the back of the device for power supply connection
3 Red led for low battery indication

Front view Side view Diagram

NOT EXTRACTABLE EMERGENCY LAMP

• Light source: 1 white led
- Backup battery:
- 1 3.6V NiMH rechargeable battery 140 mAh (not replaceable) - full-charge time: 48 hours
• Operating autonomy: approximately 2 hours
- Compact size: only 1 module occupied in the flush-mounting box - Adapters that allow adaptability with the main civil series
(see "Adaptable plates") included in the package

Adaptable plates

100%
ABB Mylos serie
Ave S44 series
Bticino Axolute series
Bticino Axolute Air series
Bticino Light series Bticino Living International Series
Bticino Living International se
Bticino LivingLight series (LL)
Bticino LivingLight Air series
Bticino Matix series

For information on the possibility of using different plates

contact the technical assistance service

Code	Model	Description	Colour	Power supply
VE758300	Vega	Flush-mounting not extractable emergency lamp	Opal white	230 V~

VEGA-ENG-072019

TECHNICAL INFORMATION

COMPLEMENTS FOR CIVIL SERIES

GENERAL CHARACTERISTICS

Power supply V AC 230 (-15% ÷ +10%)
Frequency Hz 50/60
Fastened flush
Maximum cables section mm	2	1.5
Light source		1 white led
Luminous intensity	mcd	2400
Emission angle		120°
Backup battery
Full-charge time	h	48
Autonomy	h	2
Operating temperature	°C	0 ÷ 40
Storage temperature	°C	-20 ÷ 40
Operating humidity	RH	20% ÷ 90%non condensing
Protection degree		IP40

REFERENCE STANDARDS

Compliance with Community Directives: 2014/35/EU (LVD) and 2014/30/EU (EMCD)

is declared with reference to the following standards: EN 60598-1 • EN 60598-2-2 • EN 61000-6-1 • EN 61000-6-3