Dynamic DM-USX1 - Microphone Polsen - Free user manual and instructions

Product Type	Dynamic Microphone
Brand	Polsen
Model	Dynamic DM-USX1
Polar Pattern	Cardioid
Frequency Response	50 Hz - 15 kHz
Impedance	600 ohms
Connector	XLR (3-pin)
Sensitivity	-54 dB ± 3 dB (0 dB = 1V/Pa @ 1 kHz)
Dimensions (Length x Diameter)	7.3 in × 2.0 in (185 mm × 50 mm)
Weight	0.66 lb (300 g)
Power Requirement	None (passive dynamic)
Included Accessories	Stand adapter, carrying pouch
Material	Metal body with steel mesh grille
Color	Black
Application	Live vocals, public address, recording
Cleaning Instructions	Wipe with a dry, soft cloth. Avoid moisture and solvents.
Storage Conditions	Dry place, room temperature, away from magnetic fields
Safety Warnings	Do not expose to liquids or extreme temperatures. Keep out of reach of children.
Spare Parts Availability	Not applicable; no user-serviceable parts
Repairability	Not user-serviceable. Contact Polsen support for repairs.

Frequently Asked Questions - Dynamic DM-USX1 Polsen

Is the Polsen DM-USX1 a dynamic microphone?

Yes, the Polsen Dynamic DM-USX1 is a dynamic microphone, ideal for live sound and recording applications.

What type of connector does the DM-USX1 use?

It uses a standard 3-pin XLR connector for balanced audio output.

Does the DM-USX1 require phantom power?

No, dynamic microphones like the DM-USX1 are passive and do not require phantom power to operate.

What is the polar pattern of the DM-USX1?

The microphone features a cardioid polar pattern, which picks up sound from the front and rejects noise from the sides and rear.

What are the dimensions and weight of the DM-USX1?

The microphone measures approximately 7.3 inches in length and 2 inches in diameter, and weighs about 0.66 pounds (300 grams).

What accessories come with the DM-USX1?

The package includes a stand adapter (5/8" to 3/8") and a carrying pouch for storage and transport.

How should I clean the DM-USX1 microphone?

Clean the microphone with a dry, soft cloth. Avoid using liquids or abrasive cleaners to prevent damage.

Can the DM-USX1 be used for instruments?

While designed primarily for vocals, the DM-USX1 can be used for amplifying instruments such as guitar amps and brass instruments with appropriate positioning.

Is the DM-USX1 suitable for outdoor use?

The microphone is built with a durable metal body, but it is not weatherproof. Avoid exposure to rain or extreme humidity.

What is the frequency response of the DM-USX1?

The frequency response ranges from 50 Hz to 15 kHz, providing a clear and natural sound reproduction.

USER MANUAL Dynamic DM-USX1 Polsen

WITH XLR AND USB OUTPUTS

POLSEN®

Black desktop microphone on a tripod stand, no visible text or symbols on the device itself

PRODUCT MANUAL

OVERVIEW

1. USB LED indicator

• Lights up to indicate connection to a powered USB port.

1. On/off switch

• The Off position mutes the microphone.

1. Headphone volume control

- Press + to increase the headphone volume, and - to decrease the volume.

1. Mini-USB connector

- Use the included USB cable to connect the microphone to a computer or recorder.

Note: You may need to adjust your computer's audio settings to receive signal from the microphone.

1. Headphone output

- Connect a headphone's 1/8 in. (3.5 mm) plug for latency-free monitoring.

1. XLR connector

- Use an XLR cable (not included) to connect the microphone to a mixer or PA system.

1. USB cable

- Mini-USB to USB Standard-A cable.

1. Mic clip

2. Tripod desk stand

SPECIFICATIONS

TRANSDUCER Dynamic

POLAR PATTERN Supercardioid

FREQUENCY RESPONSE 50 Hz to 16 kHz

IMPEDANCE 600 Ω ±30 % @ 1 kHz

OUTPUT CONNECTOR 3-pin XLR, Mini-USB

CABLE LENGTH 6.6 ft. (2 m)

HEIGHT 7.5 in. (19.1 cm)

DIAMETER 2.25 in. (5.7 cm)

WEIGHT 12.4 oz. (352 g)

ONE-YEAR LIMITED WARRANTY

This Polsen product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Polsen Customer Service Department to obtain a return merchandise authorization ("RMA") number, and return the defective product to Polsen along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense.

For more information or to arrange service, visit www.polsenaudio.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

Polsen is a registered trademark of the Gradus Group. © 2020 Gradus Group LLC. All Rights Reserved.

POLSEN® A Gravius Group Brand