LED-7100T - Flash Unit Genaray - Free user manual and instructions

Product Type	On-Camera LED Light / Flash Unit
Brand	Genaray
Model	LED-7100T
Dimensions	7.5" x 4.5" x 1.75" (19.05 x 11.43 x 4.45 cm)
Weight	0.76 lbs (345 g)
Power Source	2 x NP-F550 rechargeable batteries (7.4-14.8V) or DC input via AC adapter/car charger
Number of LEDs	312 (156 daylight + 156 tungsten)
Color Temperature Range	3200K – 5600K variable
Brightness	1400 lux @ 3 feet
Dimmable	Yes, flicker-free continuous dimming
Diffuser	Removable snap-on magnetic diffuser
Mounting	1/4"-20 thread, ball head with cold shoe, or direct tripod mount
Tilt & Rotation	180° tilt, 360° rotation via ball head
Battery Level Indicator	4-segment LED indicator (each segment ≈ 25% capacity)
Ventilation	Rear ventilation grille; do not cover during use
Cleaning Instructions	Use mild detergent solution, wipe dry with soft cloth
Safety Warnings	Do not disassemble, avoid water, keep away from children, stop if smoke/odor
Spare Parts Available	NP-F550 batteries, magnetic diffuser, AC adapter, car charger, ball head mount
Repairability	Not user-serviceable; contact place of purchase for repairs
Warranty	One-year limited warranty to original purchaser
Customer Support	Email: [e-mail]
Included Items	LED light, magnetic diffuser, 2 batteries, charger, AC adapter, car adapter, ball head mount, carrying case, manual

Frequently Asked Questions - LED-7100T Genaray

How do I mount the Genaray LED-7100T on a camera?

Use the included ball head mount: insert the 1/4"-20 screw into the light's bottom, then slide the cold shoe foot into your camera's hot shoe and tighten the locking collar.

Can I use the light while charging the batteries?

Yes, you can power the LED-7100T via the DC input using the included AC adapter or car charger, even if batteries are low or removed.

How do I adjust the color temperature?

Simply rotate the color variation knob on the side of the light to continuously change from 3200K (tungsten) to 5600K (daylight).

What batteries does the LED-7100T use?

It uses two NP-F550 rechargeable batteries (7.4V). Only one battery is required to operate, but using both extends runtime.

How do I attach the magnetic diffuser?

Hold the diffuser over the LED panel with the silver magnetized posts facing inward, then snap it into place. It attaches magnetically.

Is the light dimmable?

Yes, it features flicker-free dimming. Turn the power & dimming knob to adjust brightness from 0% to 100%.

How do I check battery level?

Press the battery level indicator button (with light off for accuracy). Four LEDs show remaining charge: each LED ≈ 25%.

What is the warranty period?

Genaray offers a one-year limited warranty from the original purchase date covering defects in materials and workmanship.

Can I use the light on a tripod directly?

Yes, the bottom has a 1/4"-20 threading. Screw the tripod's 1/4"-20 screw directly into the light for a secure mount.

How should I clean the LED-7100T?

Use a mild detergent solution on a soft cloth, gently wipe the surface, then dry quickly. Avoid abrasive cleaners or submerging in liquid.

USER MANUAL LED-7100T Genaray

Close-up of a black rectangular LED array mounted on a tripod against a warm yellow background (no text or symbols visible)

genaray™

LED-7100T INTRODUCTION

Thank you for choosing the Genaray LED-7100T On-Camera Light. This product will provide you with powerful, portable and dependable illumination that can be used in a variety of settings. Featuring a super-bright 312 LED lamp count, 3200K-5600K variable color temperature, flicker-free dimmable features and a removable magnetic diffuser with advanced light dispersion capabilities, the Genaray LED-7100T On-Camera Light is the perfect choice for professional photographers and videographers alike.

KEY FEATURES PRODUCT CONTENTS

• 3200K-5600K Variable Color Temperature
  • Lightweight Design With Powerful 312 Lamp Count
• Dual On-Board Batteries & Battery Level Indicator
• Removable Snap-On Magnetic Diffuser
• Compact Profile & Case For Easy Transport

· 312 LED Light
- Magnetic Diffuser
· 2 NP-F550 Batteries
- AC/DC Dual Battery Charger
- AC Adapter
- Car Adapter
- Ball Head Mount
- Carrying Case
- Manual

SAFETY WARNINGS

• Do not attempt to disassemble, repair or perform any unauthorized modifications on device
• Do not handle with wet hands, immerse in liquids or expose to water and rain; electric shock or fire may result
  • Device contains small parts which may pose a choking hazard; keep out reach of children

• Do not operate device in presence of flammable gas or vapors

• Do not use product if it emits smoke or a strange odor; disconnect power source immediately to avoid personal injury and contact place of purchase

• Observe caution when handling batteries; only use batteries approved by the manufacturer of this product
• Batteries are prone to leakage when fully discharged; to avoid damaging product be sure to remove batteries when leaving product unattended
• Do not intentionally stare or gaze at

LED light for prolonged periods while device is on

• During operation, do not cover the ventilation grille found at the rear of device and ensure light is cool before storing
• Do not use or leave device in conditions of extreme heat, severe cold or high humidity
• Unit will display a decrease in brightness when the battery runs

low; be sure to replace battery when necessary to avoid affecting recording quality

• When cleaning the device, use only a mild detergent solution and quickly wipe dry with a soft cloth
• Dispose of used batteries, packaging and old devices in accordance with appropriate environmental regulations

PRODUCT OVERVIEW

MOUNTING LIGHT UNIT DIRECTLY ON TRIPOD

- For basic tripod installation, insert 1/4 20 screw found on tripod head into the 1/4 20 threading mount found on bottom of light unit; then tighten securely

Note

Light can also be fastened to included ball head mount, which can then be installed on cold shoe found on cameras or similar devices; see ball head mounting instructions

MOUNTING LIGHT UNIT ON BALL HEAD MOUNT

- Included ball head mount is designed to provide user with a 180° tilt/360° rotating angle feature that can be used on both cameras and other devices featuring a cold shoe

- Begin by inserting 1/4 20 screw found atop ball head mount into the 1/4 20 threading found on bottom of LED light unit and fasten securely

- Tighten adjustment locking knob so light unit does not wobble during remainder of mounting process

- Ensure cold shoe foot is firmly secured to ball head mount device and loosen locking collar found on base of ball head device

• Slide entire male cold shoe into female cold shoe of camera or other mounting device; then fasten locking collar securely
• Loosen adjustment locking knob by twisting counterclockwise and rotate ball head mount to position light at desired angle; twist locking knob clockwise to hold light unit firmly in position

Note

Cold shoe mount can also be removed to reveal an integrated 1/4 20 threading mount

- To reveal ball head mount's integrated 1/4 20 threading mount for fastening to tripod, twist locking ring resting above cold shoe counterclockwise until entire shoe comes out; insert 1/4 20 screw found on tripod head into the 1/4 20 threading mount; then follow remaining adjustment steps above

POWERING DEVICE

• Begin by holding a fully-charged battery in position over Battery 1 Mounting Area, leaving only a small gap between conductor contacts found on battery and metal prongs found on unit
• Push battery down and lock into place by sliding it inwards along grooves until an audible click is heard; repeat sequence with second battery over Battery 2 Mounting Area

Note

Only one battery is technically required to operate light

• Twist the power & dimming switch clockwise to turn LED lights on
• Press the built-in battery level indicator button to instantly view the power

remaining in both batteries; each indicator circle represents approximately 25% of battery capacity; the showing of 4 lit circles combined will represent a fully charged battery

Note

For an accurate reading of battery levels, it is best to turn off light unit before using battery level indicator feature

• Rechargeable batteries can be removed by firmly pushing down on dual battery release buttons
• The DC input found on rear of device connects directly to the included AC power adapter or car charger and can provide continuous power when battery is low or not working

ADJUSTING FEATURES

• To adjust the 3200K-5600K variable color temperature range, simply rotate color variation knob until desired effect is achieved
• To adjust the flicker-free dimmable features, simply rotate the power & dimming knob until desired effect is achieved
• To install magnetic snap-on diffusion filter, hold diffuser over LED panel with silver magnetized posts facing inwards; then quickly snap it into place

PRODUCT SPECIFICATIONS

Bulb Type: 156 Daylight & 156 Tungsten LEDs

Brightness: 1400 lux @ 3'

Color Temperature: 3200K - 5600K

Voltage: 7.4-14.8V

Weight: 0.76 lbs

Dimension: 7.5" x 4.5" x 1.75"

CUSTOMER SUPPORT

For more information about this product or to contact the Genaray Customer Support Center with any questions, please send your email correspondence to: [e-mail].

ONE-YEAR LIMITED WARRANTY

Genaray provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later (the "Warranty Period"). Our responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer use. To obtain warranty coverage during the Warranty Period, contact your place of purchase ("Seller") to obtain a return merchandise authorization ("RMA") number, and return to Seller the defective product along with proof of purchase and the RMA number. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights which vary from state to state. © Copyright 2013 Genaray

www.genaray.com

6 genaray™