HS4 - Loudspeaker Galaxy Audio - Free user manual and instructions

Product Type	Active Speaker
Brand	Galaxy Audio
Model	HS4
Speaker Configuration	2-way (woofer + tweeter)
Woofer Size	4 inches
Tweeter Size	1 inch
Amplifier Power	30 W RMS
Frequency Response	80 Hz – 20 kHz
Inputs	1x XLR, 1x 1/4" TRS
Outputs	1x XLR Link
Controls	Volume knob, power switch
Power Supply	100-240 V AC, 50/60 Hz
Dimensions (H x W x D)	9.8 x 6.3 x 7.5 inches (250 x 160 x 190 mm)
Weight	9.9 lbs (4.5 kg)
Enclosure Type	Bass-reflex with front port
Mounting Options	Standard pole mount, floor or shelf placement
Usage	Studio monitoring, live sound, personal PA
Maintenance	Clean with dry cloth; keep away from moisture
Safety	Use grounded outlet; avoid overdriving
Spare Parts Availability	Contact Galaxy Audio service

Frequently Asked Questions - HS4 Galaxy Audio

How do I connect the HS4 to a mixer?

Use a balanced XLR or 1/4" TRS cable from the mixer output to the speaker input.

Can I daisy-chain multiple HS4 speakers?

Yes, use the XLR Link output to connect to another speaker's input.

What power cable does the HS4 use?

It uses a standard IEC power cord (C13 connector).

Is the HS4 magnetically shielded?

No, it is not shielded; keep away from CRT monitors or magnetic media.

What is the recommended placement for the HS4?

Place on a stable surface or mount on a speaker stand at ear level.

How to reduce hum or noise?

Ensure all equipment is on the same grounded circuit; use balanced cables.

Can I use the HS4 as a studio monitor?

Yes, it is suitable for nearfield monitoring with its 4" woofer.

What is the maximum SPL?

Approximately 98 dB SPL continuous.

How to clean the speaker grille?

Gently vacuum or use a soft brush; avoid liquids.

Does the HS4 have a warranty?

Yes, typically a 2-year limited warranty; check with seller.

USER MANUAL HS4 Galaxy Audio

Connect one end of a 1/4" cable to either 1/4" input, and the other end to your powered amplifier.

2

For more details on Ohm's Law, Scan Here:

To Daisy Chain:
Connect one end of a 1/4" cable to either 1/4" input, and the other end to either 1/4" input on the other HS4. Repeat for any other HS4's being Daisy Chained.

Stand Mounting (Optional)

1

Attach the SA-1 to the mic stand

2

Lift the HS4 over the stand, align it up with the hole.

3

Bring the HS4 down onto the stand gently until secure.

Hot Spot Personal Monitor

Black rectangular electronic device with ventilation grilles mounted on a stand (no visible text or symbols)

Quick Start Guide

FAQ

1. Q. How many HS4 can I connect together?

A. It depends on your amplifiers rating. If it is rated to run at 4ohms, the maximum number of HS4 is 4, if your amp is rated to 2 ohms, you could use up to 8 HS4.

The Personal

Monitor Experts

BE HEARD™

Other Helpful Sources

Specifications subject to change without notice.

601 E. Pawnee Wichita, KS 67211 316. 263.2852 FAX [phone] www.galaxyaudio.com

Distributed in Canada by Audio Distributors International (ADI) 1275 Newton, unit 6 Boucherville, QC J4B 5H2 Canada

Boucherville, QC J4B 5H2 Canada

Printed in China V20151123

123.7.12