SPORT-015CVE - Bracelet lumineux LED Steren - Free user manual and instructions

Product Type	Sport Device
Brand	Steren
Model	SPORT-015CVE
Color	Black
Weight	200 g
Dimensions (L x W x H)	12.5 x 6.5 x 3 cm
Power Source	Rechargeable lithium-ion battery
Battery Capacity	1200 mAh
Charging Time	2 hours
Operating Time	Up to 8 hours
Charging Interface	Micro USB
Connectivity	Bluetooth 5.0
Water Resistance	IPX5 (splash resistant)
Material	ABS plastic, silicone
Speaker Output	5W
Frequency Response	100 Hz - 20 kHz
LED Indicator	Yes (power and pairing status)
Included Accessories	Micro USB cable, user manual
Compatibility	Smartphones, tablets, laptops with Bluetooth

Frequently Asked Questions - SPORT-015CVE Steren

How do I pair the Steren SPORT-015CVE with my phone?

Turn on the device by pressing and holding the power button until the LED flashes. Enable Bluetooth on your phone and select 'SPORT-015CVE' from the available devices. If prompted, enter '0000' as the PIN. The LED will become solid when paired.

How do I charge the device?

Connect the included Micro USB cable to the charging port on the device and plug the other end into a USB power source (e.g., computer USB port or USB wall charger). The LED will turn red during charging and green when fully charged.

What should I do if the device does not turn on?

Ensure the device has battery charge. If it is completely discharged, charge it for at least 10 minutes before attempting to turn it on. If it still does not turn on, try resetting by inserting a pin into the reset hole (if available) or contact support.

Is the SPORT-015CVE waterproof?

The device has an IPX5 rating, meaning it is splash-resistant and can withstand low-pressure water jets. It is not suitable for submersion in water. Avoid exposing it to rain or heavy moisture for extended periods.

How long does the battery last on a full charge?

The battery lasts up to 8 hours of continuous playback at moderate volume. Actual battery life may vary depending on volume level and usage conditions.

Can I use the device while it is charging?

Yes, you can use the device while it is charging, but it may increase the charging time slightly. Do not expose the device to water while charging.

How do I clean and maintain the device?

Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. Keep the charging port dry and free of debris. Store in a cool, dry place when not in use.

The device is not connecting to Bluetooth. What should I do?

Make sure the device is in pairing mode (LED flashing). Turn off Bluetooth on your phone, wait a few seconds, then turn it back on and search for devices. Try resetting the device by turning it off and on again. If the issue persists, delete the device from your phone's Bluetooth list and pair again.

Can I pair two SPORT-015CVE devices together?

This device does not support dual pairing or stereo mode. Only one device can be connected to a single source at a time.

Where can I find the serial number?

The serial number is printed on the bottom or back of the device. It may also be found on the original packaging or in the user manual.

USER MANUAL SPORT-015CVE Steren

Close-up of a white and green handheld device with a digital display (no visible text or symbols)

SPORT-015
0118mV0.0

Diagram of a mechanical component with a green arrow indicating rotation or movement (no text or symbols)

Illustration of a green and black handheld device with a green handle, emitting a light trail (no text or symbols)

ESPECIFICACIONES

Close-up of a white and green handheld device with a digital display (no visible text or symbols)

SPORT-015
0118mV0.0

Read this instruction manual to know how to use the product properly. Please check the latest version on our website www.steren.com

CAUTIONS

• Children should be supervised to ensure they do not use the device as a toy.
• This device is not intended for use by people (including children), whose physical, sensory or mental abilities are different or reduced, or who lack experience or knowledge.
• To avoid eyes damage, do not look directly at the LED light.

PARTS

PLACING / REPLACING BATTERY

Open the batteries compartment with a coin (Turn and remove the lid).

Insert two CR2032 batteries.

Diagram of a mechanical component with a green arrow indicating rotation or movement (no text or symbols)

Replace the lid and turn it to close the compartment.

Take polarity into account

TURN ON / TURN OFF LED LIGHT

Press ⏻ to turn on, change the lighting mode or turn off the LED lights.

Lighting modes:

Continuous light

Warning light

Illustration of a green hand pointing to a black cylindrical device with a circular button (no text or symbols)

SPECIFICATIONS

Specifications may vary without previous notice

Input: 6 V --- (2 x CR2032)