XS-HS10 - Car speaker SONY - Free user manual and instructions
Find the device manual for free XS-HS10 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Speaker |
| Brand | Sony |
| Model | XS-HS10 |
| Speaker Type | 2-Way Coaxial |
| Woofer Size | 4 inches (10 cm) |
| Peak Power | 150 W |
| RMS Power | 30 W |
| Impedance | 4 Ohms |
| Sensitivity | 89 dB |
| Frequency Response | 50 Hz - 20 kHz |
| Mounting Depth | 1.75 inches (44 mm) |
| Cutout Diameter | 3.7 inches (94 mm) |
| Weight | 0.71 lbs (0.32 kg) |
| Material - Cone | Polypropylene |
| Material - Surround | Rubber |
| Material - Tweeter | PEI Balanced Dome |
| Maintenance | Clean gently with a dry cloth. Keep away from moisture. |
| Safety | Disconnect battery before installation. Avoid short circuits. |
| Spare Parts & Repairability | Contact Sony support or authorized service centers. |
| General Information | Designed for cars and boats. 1-year warranty. |
Frequently Asked Questions - XS-HS10 SONY
What are the installation requirements for the Sony XS-HS10?
Ensure the speaker fits the designated cutout (approx. 3.7 inches diameter and 1.75 inches depth). Disconnect the car battery before installation. Use included mounting hardware and connect to a compatible amplifier or head unit.
Is the XS-HS10 compatible with my car's factory stereo?
Yes, it can be used with most factory stereos, but for optimal performance, pair it with an external amplifier that delivers 15-30W RMS at 4 ohms.
What is the power handling of this speaker?
The Sony XS-HS10 handles up to 30W RMS and 150W peak. Exceeding these ratings may damage the speaker.
Can I use the XS-HS10 in a marine environment?
This speaker is designed for cars and boats, but it is not fully waterproof. Avoid direct water exposure and mount it in a protected area.
How do I clean the XS-HS10 speaker?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners as they may damage the cone and surround.
What is the warranty on the Sony XS-HS10?
Sony offers a 1-year limited warranty from the date of purchase. Keep your receipt for service claims.
Why is there no sound from the speaker after installation?
Check wiring connections: ensure positive and negative terminals are correct. Verify that the head unit or amplifier is powered and not muted. Test with a known working speaker to isolate the issue.
Can I replace the tweeter separately?
The XS-HS10 is a coaxial speaker with an integrated tweeter. It is not designed for separate replacement. If the tweeter fails, the entire speaker should be replaced.
What tools are needed for installation?
You will need a screwdriver (Phillips or flathead), wire stripper, electrical tape or crimp connectors, and a drill if new mounting holes are required.
Does the speaker come with a grille?
Yes, the Sony XS-HS10 includes a protective grille that snaps onto the speaker frame.
User questions about XS-HS10 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car speaker in PDF format for free! Find your manual XS-HS10 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XS-HS10 by SONY.