DX1 - Office chair DXSIRE - Free user manual and instructions

Product Type	Office Chair
Brand	DXSIRE
Model	DX1
Overall Height	45-52 inches (adjustable)
Seat Width	20 inches
Seat Depth	19 inches
Weight Capacity	250 lbs (113 kg)
Net Weight	35 lbs (15.9 kg)
Material	Breathable mesh back, padded fabric seat
Base	5-star nylon base
Casters	Nylon casters suitable for carpet and hard floors
Armrests	Adjustable height armrests (2D)
Seat Height Adjustment	Gas lift, 4-inch range
Tilt Lock	Multi-position tilt lock with tension control
Lumbar Support	Adjustable lumbar support
Headrest	Adjustable headrest (height and angle)
Assembly Required	Yes, simple assembly with included tools
Maintenance	Clean with mild soap and damp cloth; avoid harsh chemicals
Safety Standards	Meets BIFMA standards for stability and durability
Repairability	Replaceable casters, gas lift, and armrests available

Frequently Asked Questions - DX1 DXSIRE

How do I adjust the seat height on the DXSIRE DX1 chair?

To adjust the seat height, locate the lever under the seat. Pull the lever up while seated to raise the chair, or pull it up while standing to lower it. Release the lever at your desired height.

Can the armrests be removed or adjusted?

Yes, the armrests are adjustable in height. Press the button on the side of the armrest and move it up or down. They are not designed to be removed, but can be detached for cleaning by unscrewing the bolts underneath the seat.

What is the weight capacity of the DX1 chair?

The DXSIRE DX1 has a maximum weight capacity of 250 lbs (113 kg). Exceeding this limit may damage the chair or cause injury.

How do I clean the mesh back and fabric seat?

For the mesh back, use a vacuum with a brush attachment to remove dust. For the fabric seat, spot clean with a mild soap solution and a damp cloth. Avoid soaking the fabric. Let air dry completely.

Is assembly required? How long does it take?

Yes, assembly is required. The chair comes with all necessary tools and instructions. Typically, assembly takes 15-20 minutes for one person.

The chair leans to one side. How can I fix it?

First, check if the gas lift is properly seated. Remove the seat and ensure the gas cylinder is fully inserted into the base. If the issue persists, contact DXSIRE support for a replacement part.

Can the headrest be removed or adjusted?

The headrest is adjustable in height and angle. To remove it, locate the release button or screws (consult the manual). It is designed to be adjustable, not typically removed.

Does the chair have a tilt lock feature?

Yes, the DX1 includes a multi-position tilt lock. Pull the tilt lever under the seat to engage or disengage the lock. You can also adjust the tilt tension using the knob under the seat.

What tools are needed for assembly?

All necessary tools are included in the package: an Allen key and a screwdriver. No additional tools are required.

How do I contact DXSIRE for warranty or spare parts?

For warranty claims or spare parts, visit the official DXSIRE website or contact their customer service via email or phone number (listed in the manual). Have your model number (DX1) and proof of purchase ready.

USER MANUAL DX1 DXSIRE