MK-G38PR - Choppers PANASONIC - Free user manual and instructions

Product Type	Electric Meat Grinder / Mincer
Model	MK-G38PR
Brand	Panasonic
Motor Power	800 W
Voltage / Frequency	220-240 V ~ 50/60 Hz
Housing Material	Plastic with Stainless Steel Blade
Capacity (Max)	1.5 kg of meat per minute
Included Accessories	Fine, medium, and coarse grinding plates; sausage filling tube; kubbe attachment; pusher
Dimensions (W x D x H)	Approx. 20 x 18 x 15 cm
Weight	2.5 kg
Cord Length	1.2 m
Safety Features	Safety lock when top housing is not properly closed; overload protection
Reverse Function	Yes, to clear blockages
Cleaning	Removable parts are dishwasher safe (top rack); wipe motor base with damp cloth
Noise Level	Approx. 75 dB
Warranty	2 years

Frequently Asked Questions - MK-G38PR PANASONIC

How to assemble the Panasonic MK-G38PR meat grinder?

Align the auger with the drive shaft, slide the blade and grinding plate over the auger, then screw the locking ring on tightly. Ensure the safety lock clicks into place.

Can I grind bones with this mincer?

No, the MK-G38PR is designed for boneless meat. Grinding bones may damage the blade and motor.

How to clean the grinder after use?

Disassemble all parts. Wash the auger, blade, plates, and tray in warm soapy water or dishwasher (top rack). Wipe the motor housing with a damp cloth. Dry thoroughly before reassembly.

What should I do if the grinder gets clogged?

Press the reverse button briefly to clear the blockage. If it persists, turn off and unplug, then disassemble and remove the stuck food manually.

Is the MK-G38PR suitable for making sausages?

Yes, it comes with a sausage filling tube. Attach it instead of the locking ring, then slide the casing onto the tube and push the meat through.

What is the maximum continuous running time?

Do not run the motor for more than 10 minutes continuously. Allow it to cool for 30 minutes before restarting.

Are spare parts available for this model?

Yes, you can purchase replacement blades, plates, and other parts from Panasonic authorized service centers or online retailers.

Can I grind vegetables or fruits?

The grinder is intended for meat. Vegetables and fruits can be processed but will produce a mushy texture; use a blender for better results.

Why is the grinder not starting?

Check that the safety lock is properly engaged and all parts are correctly assembled. Also ensure the power cord is plugged in and the outlet works.

How to store the mincer?

Clean and dry all parts thoroughly. Store with the motor base upright, and keep accessories in a dry place to prevent rust.

USER MANUAL MK-G38PR PANASONIC

Содержание

Parts Identification ....1

Precautions....6

How to Use....6 \~ 7

Specifications 8

Panasonic

Before operating this unit, please read instructions completely.

Parts Identification

Режущие поверхности

Ріжучі поверхні

Cutting surface Cutting surface should be faced to Cutting plate when being set, otherwise meat will not be ground.

① Выключатель

⑥ Ручка фиксации

j Cutting plate (fine)

④ Cutting plate (medium)

① Cutting plate (coarse)

m Cap

Внимание

Как пользоваться

Precautions How to Use

• Make sure that the voltage and frequency indicated on the bottom plate are the same as your local supply.
• Unplug when assembling or disassembling the unit.
• Close supervision is necessary when any appliance is used near children.
• When carrying the unit, be sure to hold the motor housing with both hands; do not hold only the hopper plate.
• Never feed food with hands. Use the food pusher.
• Do not grind hard foods such as bones and nuts. (They may cause jamming.)
• Do not grind ginger and other materials with hard fiber. (They will not be ground.)
• To avoid jamming, do not force to operate the unit with excessive pressure.

If the unit j ams due to hard materials lodged onto the feed screw or the cutting blade, switch off immediately and clean the unit.

When the circuit breaker activates, do not switch on. (See "Caution on Jamming" on page 7.)

• Never try to disassemble or repair the unit by yourself.
• If the supply cord is damaged, it must be replaced by a special cord or a cord assembly available from your Panasonic dealer or its service agent.
• Never remove or attach the hopper plate, the head or cap when the motor is operating.
• Do not disassemble the grinder or place anything (especially finger, spoon, fork, etc.) in the grinder during operation.
• This product is intended for household use only.

Before use

Wash all the parts (ex cept those that do not touch foods ☐ a, b, c, and d) in warm soapy water.

□

Before plugging in, ensure the switch is off.

To Grind Meat

(Assembling)

1 Place the head onto the opening of the motor housing. Holding the head with one hand, place the locking knob into the hole on the side of the motor housing and tighten it clockwise.
2 Place the feed screw into the head, long end first, by turning the feed screw slightly until it is set into the motor housing.
3 Place the cutting blade onto the feed screw shaft with the blade facing the front as illustrated. (If it is not fitted properly, meat will not be ground.)
4 Place the desired cutting plate next to the cutting blade, fitting protrusions in the slots.
5 Screw the cap into place until tight. (Do not over tighten.)

Place the hopper plate on the head and fix into position.

[]

Locate the unit on a firm surface.

(The air passage at the bottom and the side of the motor housing should be kept free and not blocked.)

(Grinding Meat)

Cut all foods into pieces so that they fit easily into the hopper opening.

Plug in, then switch on.

6 Feed foods into the hopper plate. (Use the food pusher.)

After use, switch off and unplug.

Note:

The grinder head may rotate slightly during use, but it is normal.

Do not over tighten the locking knob to stop this movement.

It may cause damage.

Caution on Jamming

When the circuit breaker automatically stops the motor or when the motor continues to function but no meat comes out of the cutting plate due to jamming of bones or other materials, switch off.

Do not switch on.

□

Unplug and clean the unit.

(See " How to Clean" .)

How to Clean

(Disassembling)

Make sure that the motor has stopped completely. ☐ Disconnect the plug from the power outlet.

Disassemble by reversing the steps from 5 - 1 .

7 To remove the cap easily, place a screwdriver between the protrusions and unscrew.

[

To remove the cutting plate easily, place a ☐

screwdriv er between the cutting plate and the □

head as illustrated and lift up.

(Cleaning)

Remov e meat and other food.

Wash each part in warm soapy water.

Do not immerse the motor housing in water; simply wipe it with a damp cloth.

[ ]

A little salad oil on Ⓗ, ⓙ after washing and drying ☐ will keep them lubricated.

[ ]

Note:

• A bleaching solution containing chlorine will discolor the aluminum surface.
• Thinners and benzines will crack or change the color of the unit.
• Do not wash any parts in a dishwasher. (It may discolor the aluminum surface.)

- Leaving the partsj \~ ① and f, g, m wet after cleaning may cause corrosion. Wipe off thoroughly with a dry cloth after cleaning. Dipping or rubbing some salad oil on j \~ ① immediately after drying them will help prevent them from rusting.

Power supply	230 V 50-60 Hz
Dimensions (H X W X D)	38.6 X 16.6 X 34.2 cm
Weight	3.6 kg
Attachments	Cutting plates

Matsushita Electric Industrial Co., Ltd.

Osaka, Japan

Web Site: http://www.panasonic.co.jp/global/