RMEH4BL - Ruban d'impression thermique Panduit - Free user manual and instructions

Brand	Panduit
Model	RMEH4BL
Product Type	Cable Tie Mount
Material	Nylon 6.6
Color	Black
Dimensions (L x W x H)	1.5 in x 1.5 in x 0.2 in (38.1 mm x 38.1 mm x 5.1 mm)
Weight	0.1 oz (2.8 g)
Adhesive Type	Pressure-sensitive acrylic foam tape
Operating Temperature Range	-40°F to 185°F (-40°C to 85°C)
Mounting Type	Adhesive back for flat surfaces
Compatible Cable Ties	Up to 0.300 in (7.6 mm) wide
Package Quantity	50 pieces per bag
Standards	UL Recognized, RoHS Compliant
Application	Securing wires and cables in electrical cabinets, panels, and enclosures
Installation	Peel and stick to clean, dry surface; insert cable tie through mount
Maintenance	Wipe with damp cloth if dirty; avoid solvents
Safety	Do not exceed temperature rating; ensure adhesive bond is secure
Repair/Spare Parts	Single-use mount; replace if adhesive fails
Flammability Rating	UL 94 V-2

Frequently Asked Questions - RMEH4BL Panduit

What is the Panduit RMEH4BL used for?

The Panduit RMEH4BL is an adhesive-backed cable tie mount used to secure cables and wires in electrical panels, enclosures, and cable management systems.

What material is the RMEH4BL made of?

It is made of nylon 6.6 with a black finish.

Can the RMEH4BL be used outdoors?

It is designed for indoor use; exposure to UV and extreme weather may degrade the adhesive. For outdoor use, consider Panduit's outdoor-rated mounts.

How do I install the RMEH4BL?

Clean the surface, peel the liner, press firmly onto a smooth, dry surface for 30 seconds, then wait 24 hours for maximum bond strength before applying cable ties.

What cable tie width is compatible?

It is compatible with cable ties up to 0.300 inches (7.6 mm) wide, which covers most standard Panduit cable ties.

How strong is the adhesive?

The adhesive is a pressure-sensitive acrylic foam tape that provides high strength on clean surfaces. Typical shear strength is 4 lb/in².

Can I remove and reuse the mount?

No, the mount is designed for permanent installation; removing it may damage the surface and destroy the adhesive.

What is the temperature rating?

It has an operating temperature range of -40°F to 185°F (-40°C to 85°C).

Is the RMEH4BL UL recognized?

Yes, it is UL recognized and RoHS compliant.

Where can I buy the RMEH4BL?

It can be purchased from electrical distributors, online retailers like Amazon, and directly from Panduit's website.

USER MANUAL RMEH4BL Panduit

Thermal Transfer Hybrid Ribbon

This specification is intended to outline the physical and chemical properties of PANDUIT's black thermal transfer hybrid ribbon and include the following part numbers.

Ribbon Part Number
RHH4BL-Z	TTRH-BL	RMH2BL
RHH2BL-S	TTRH2-BL	RMH4BL
RHH4BL-S	RMEH2BL	RMEH4BL

PRODUCT SPECIFICATIONS:

Ribbon Property

Base Film Caliper: 4.5 µ m

Ink Color: Black.

Ink Formulation:

Pigmented Wax/Resin

Ink Coating Weight 3.80 g/sq.m

Ribbon is free from coating voids, skips, wrinkles or other conditions which would adversely affect the transfer integrity.

Printing Property

Optimal Print: Thermal transfer printing should occur in the temperature range of

41⁰F - 95⁰F(5⁰C - 35⁰C) at 30% -85% R.H

Usage Condition:

41⁰F - 95⁰F(5⁰C - 35⁰C) at 30% -85% R.H

Storage Condition:

Keep indoor, avoiding high temperature (such as beside heat source), high humidity, and direct sunlight.

Storage Life:

One year at storage conditions.

Ribbon components are not considered health hazards, except when exposed to fire.

Features:

1. Exceptional smudge and scratch resistance
2. Produces high print quality normal, rotated and two dimensional bar codes, logos and graphics

LIMITED WARRANTY

All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer.

NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER.

THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED.

The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.