CSD-60I - CD Player MPMAN - Free user manual and instructions

Product Type	Portable CD Player
Brand	MPMAN
Model	CSD-60I
Power Source	AC adapter (input: 100-240V) or 2x AA batteries
Dimensions	Approx. 14.0 x 12.0 x 3.0 inches
Weight	Approx. 1.5 lbs (without batteries)
Playback Formats	CD, CD-R, CD-RW, MP3 CD
Audio Outputs	3.5mm headphone jack, line out (shared)
Skip/Search Functions	Forward/Backward skip, fast forward/reverse
Program Play	Up to 20 tracks programmable
Repeat Modes	Single track, all tracks, folder (for MP3)
Anti-Shock Protection	ESP (Electronic Shock Protection) - 45 seconds for CD, 120 seconds for MP3
Display	LCD with track number, time, playback status
Headphone Jack	3.5mm stereo
DC Input	4.5V, 0.6A (center positive)
Accessories Included	AC adapter, earbuds, user manual
Maintenance	Clean lens with dry cotton swab or lens cleaning disc; avoid moisture
Safety	Do not expose to rain or moisture; use only approved power supply
Repairability	No user-serviceable parts; contact MPMAN service center
General Information	Portable design with top-loading lid; supports CD text

Frequently Asked Questions - CSD-60I MPMAN

How do I clean the CD lens if the player skips?

Use a CD lens cleaning disc (available at electronics stores). Alternatively, gently wipe the lens with a dry cotton swab in a circular motion. Do not use liquids.

Why does my CD player skip heavily?

Check if the disc is scratched or dirty. Also ensure the anti-shock protection (ESP) is turned on for portable use. If the player is moved abruptly, it may cause skipping.

Can I play MP3 CDs on the CSD-60I?

Yes, the CSD-60I supports CD-R and CD-RW discs burned with MP3 files up to 192kbps. It can read folders and play files sequentially.

How do I use the repeat function?

Press the REPEAT button on the player or remote. Cycle through: Repeat 1 (single track), Repeat All (all tracks), and Repeat Folder (for MP3 discs). The display will show the mode icon.

What type of batteries does the CSD-60I use?

It uses two AA size batteries (not included). For best performance, use alkaline batteries. When using batteries, the AC adapter should be disconnected.

How do I program the order of tracks?

Stop playback, press PROGRAM on the remote or panel. Use Skip +/- to select a track, then press PROGRAM again to add it. Repeat up to 20 tracks, then press PLAY to start.

No sound is coming from the headphones/aux output. What should I do?

Check that the volume is not set to minimum (0). Ensure the headphones are firmly plugged into the 3.5mm jack. If using external speakers, verify the cable and input selection.

How do I reset the player?

If the player freezes or malfunctions, press the RESET button (small pinhole on the bottom) using a paperclip. This restores factory settings. Alternatively, remove batteries and disconnect AC power for 30 seconds.

Can I connect the CSD-60I to my car stereo?

Yes, use a 3.5mm to 3.5mm aux cable or a cassette adapter (if your car has a cassette player). Plug into the headphone/line output of the CSD-60I and the aux input of your car stereo.

Where can I download the user manual for the MPMAN CSD-60I?

The manual is available for free download on notice-facile.com or the MPMAN support website. Search by model CSD-60I under the 'CD Player' category.

USER MANUAL CSD-60I MPMAN

Press again to stop playing CD / MP3 / iPod / iPhone operation temporarily. Press again to resume student

DKP + 8 Press to go to the next track or back to the previous bus

STOP - Press and hold while playing until you find this point you want to play. Press to stop all CD-/MP3-/IPOD-/PHONE operation:

Press the FOLDER 4' or FOLDER 7 button to select folder. Further recombination can only operate this case with all

(Ploor selection) can only operate out there are 497 at 488.2 (STOCK/NTM).

ENGLISH (GB)

PROGRAM The sum is given for: ATOE, Jordan, Afghanistan.

1. For CD disc, press the "MEMORY" button, the display will show "00/P-01".

For MP3 dist, press the "MEMORY" button, the display will show "F00 P-01"; 2. Select desired track by using the "SKIP" or "SKIP" button. For MP3, select a desired album by pressing "FOLDER +" or "FOLDER -".

button And press 'MEMORY' button to confirm folder number. Too will appear to select desired track by using the 'SKIP +' or 'SKIP -' button

1. Press the 4000017 button again to current desired track with the program memory.

2. Repeat step 2 and 3 to enter additional tracks into the program memory

3. When all the desired tracks have been programmed, press the "PLAY/PHUSE" button to play the disc in the order you by programmed.

4. Press the "STOP" button twice to terminate programmed playback.

CHARGING Charges Distribution: aim for trade

- In any node, directly dock your iPod

* Charging IP00 / IPHONE only can work when AC power supply. When the host use battery power, do not charging for IP00 / IPHONE CLOCK SETTING

1 Press/the 'STAM

1. Press the "CLOCK" button and hold for few seconds to entry clock set mode. The display will select T20M and B40Hz, off at two times (1:30W / 70Hz) in selecting the T20F6 x' or T20F8. In the

2. Press the 'CLOCK' button to confirm time format, display will show 'AM 12:00' or 'PM 12:00' if 12H fm

3. Adjust hour, then minute by pressing the "SKIP +" or "SKIP -" button TIME SETTING

Timer setting must be after completed clock setting.

1. Press the "STANDAT" button to switch sure at handby mode.

2. Press the "TMER" button to any server set mode.

3. Adjust four, minute by pressing the 'SKIP+' or 'SKIP-' button, press the 'TMER' button to confirm.

4. TheDevice will show 'TMER OFF'.

5. Adjust hour, minute by pressing the 'SKIP +' or 'SKIP -' button, press the 'TIMER' button to co

6. The display show input sources by pressing "SKIP =" or "SKIP =" (Ch) Chose the input and press "TIMER" button to confirm the selection.

7. The display show volume level pressing 'SKIP' or 'SKIP' to adjust the volume level and press 'TIMER' button to confirm the selection.

8. After confirmation the unit displays show 'TIMER ON TIME', 'TIMER OK TIME', 'INPUT SOURCE'.

9. AMI LONTHAT: The unit display slot "NEER ON TIME", "NEER OFF TIME", "WP-OF SOURCE" and "VOLUME LEVEL" and unit go to standby mode

10. Press the "TMER" button to activate timer on / off function 10.Press and hold the "PLAY / PAUSE" button over 3 sec. to

- Press the "ENTER" button again to select a send menu or train

- When All the cleaned tracks have been selected, press the 'ENTER' button to play

FRENCH (FR)

1/Hologe 2-Avrill 3-Fin-OIS 4-Minsabur 5-Rappel-Dafarme 6-Mite 7-Clover+ 8-Clover- 9-Mbnu/ST 10-Mb 11-Gaster- 12-Rigester 13-Villemi+ 14-LentDuspension

Sindoro: 10.5% (17g/min)

PROGRAMMARS AMOUNTS (GAR)

1. Par i CD, previ il pulbente 'MEMORA' sul display

2. Selezona la Inacia desiderata usando i tasi "SALTA +" o "SALTA -" (Par

(1) In addition, there is a stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise stepwise step-wise

If a meeting will not appear "TIMCH LOW TUD", "TIMCH ON TUD", "MASCATION" in DOCUMENT/READ. If the opposite pair is standby-modus in:

CE Applicable minimum Low Voltage Directive

EN 50.000, 2002 + AT: 2006 + AT: Electromagnetic Compatibility Clave

EN 150/10: 2001 + A1 + A2 / EN 61000-3-2: 2006 / EN 61000-3-3: 2008 / EN 59028: 2007

SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE. For more information unless visit our website.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

(No text)

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

[Non-Text]

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

[Non-Text]

[Non-Text]

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

(No text)

[Non-Text]

(No text)

(No text)

[Non-Text]

[Non-Text]

广力云智慧零售收银系统

[Non-Text]

[Non-Text]

(No text)

-

	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	10
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25
10	25