Siva Boogie - Audio Amplifier Hotone - Free user manual and instructions

Type	Guitar Amplifier Head
Power Output	1W RMS
Controls	Gain, Volume, Tone
Input	1/4" Instrument Jack
Output	1/4" Speaker Out (8 ohms), 1/8" Headphone Out
Power Supply	9V DC (center negative, 2.1mm barrel)
Dimensions	4.9 x 2.8 x 2.4 inches (125 x 72 x 62 mm)
Weight	1.1 lbs (500 g)
Speaker Simulator	Built-in Cabinet Simulation
Construction	Metal Chassis
Cooling	Passive (no fan)
Frequency Response	20 Hz – 20 kHz
Signal to Noise Ratio	> 90 dB
Input Impedance	1 MOhm
Output Impedance	8 Ohms
Protection	Short Circuit, Overload Protection
Accessories Included	9V DC Power Adapter
Cleaning	Wipe with dry cloth; avoid solvents
Repairability	User-replaceable fuses; service by qualified technician for internal parts
Certifications	CE, FCC

Frequently Asked Questions - Siva Boogie Hotone

How do I connect my guitar to the Siva Boogie?

Plug your guitar into the Input jack using a standard 1/4" instrument cable. Connect the Speaker Out to a 8-ohm guitar cab, or use Headphone Out for silent practice.

What power supply does the Siva Boogie require?

It requires a 9V DC power supply with center negative polarity and a 2.1mm barrel plug. The included adapter is recommended.

Can I use a different speaker impedance?

The Siva Boogie is designed for 8 ohms minimum. Using a lower impedance may damage the amplifier. Always match the speaker impedance.

How do I clean the amplifier?

Disconnect power and use a soft dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners.

The unit does not power on. What should I check?

Ensure the power supply is properly connected and the outlet works. Check the fuse (if accessible). If issues persist, contact Hotone support.

What is the headphone output for?

The 1/8" headphone jack provides silent practice with built-in cabinet simulation. The speaker output is muted when headphones are connected.

Is the Siva Boogie suitable for recording?

Yes, you can connect the Headphone Out to an audio interface or use the Speaker Out with a load box. The cabinet simulation gives a miked-amp tone.

How can I adjust the tone?

Use the Tone knob to shape your sound. Turn clockwise for brighter tones, counterclockwise for darker tones.

What replacement fuses should I use?

Refer to the manual; typically a 1A slow-blow fuse. Always replace with the same rating to avoid damage.

Can I use a 12V power supply?

No, only use 9V DC. Higher voltage can cause permanent damage. Stick to the specified adapter.

USER MANUAL Siva Boogie Hotone

THANK YOU FOR PURCHASING A HOTONE PRODUCT!

www.hotoneaudio.com

Front Panel

SIVA BOOGIE

HOTONE

1. INPUT: 1/4" mono jack to plug in your guitar.

2.GAIN: Controls the gain level.

3.BASS: Controls the low frequency response.

4.MIDDLE: Controls the mid frequency response.

5.TREBLE: Controls the high frequency response.

6.VOLUME: Controls the output volume.

Rear Panel

1 18V DC:
Plug in 18V DC adapter (center negative).
2 PHONES/LINE OUTPUT:
2 1/8" stereo jack, for using headphones or recording.
3 AUX IN:
1/8 ^st ereo jack, for connecting an external music player.
FX LOOP SEND:
4 1/4"mono jack, connect to your effects input jack.
(The Effects Loop is a patch point between the pre-amp and power amp).
5 FX LOOP RETURN:
1/4"mono jack, connect to your effects output jack.
6 SPEAKER OUTPUT:
1/4" mono jack, connect to your cabinet (speaker 4-16 Ω).

NANO LEGACY Series Amplifier Head

SIVA BOOGIE is a 5W Class AB Guitar Amplifier Head

Features

Sound inspired by the famous Bogner Shiva*
Extremely compact configuration for portability
● High quality tone with Volume and Gain controls
3 Band EQ controls for shaping your tone
FX LOOP for using external effects
Speaker out can automatically fit cabinets of different impedances (4-16 Ω)
● Headphone output jack is very convenient for practicing and recording
Aux In jack can let you play with an external music player

*Bogner Shiva is an amplifier model of Bogner Amplification. The mentioned manufacturer and

product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.

Specifications

Power Output: 5 Watts

Dimensions: 128 mm(W) × 75 mm(D) × 59.5 mm(H)

Weight: 440 g

www.hotoneaudio.com