CS31N - Styler Conair - Free user manual and instructions

Brand	Conair
Model	CS31N
Product Type	Hair Straightener
Plate Material	Tourmaline-coated pure ceramic
Plate Design	Floating plates for even contact
Heat Settings	5 temperature settings (Low 310°F, Medium 360°F, Med-High 390°F, High 410°F)
Auto Shut-Off	After 60 minutes of inactivity
Instant Heat	Heats up quickly for fast styling
Power Supply	120V AC, 60 Hz
Plug Type	Polarized plug (one blade wider)
Cord Length	Approximately 6 ft (1.8 m)
Dimensions	Approximately 10 x 2 x 1 inches (25 x 5 x 2.5 cm)
Weight	Approximately 0.5 lbs (227 g)
Maintenance	Wipe exterior with cloth; no lubrication needed
Cleaning	Disconnect and allow to cool before cleaning
Safety Features	Auto shut-off, polarized plug, keep away from water
Warranty	5-year limited warranty from date of purchase
Service Center	Conair Service Department, 747571 Glen Harbor Chem, Clevdale, AZ 85307
Intended Use	Household use only; for dry hair
Storage	Store in a safe, dry location out of reach of children

Frequently Asked Questions - CS31N Conair

How do I clean the straightener?

Disconnect the unit from the power source, allow it to cool, and wipe the exterior with a cloth. No lubrication is needed. Keep vents and openings free of dust.

What is the warranty period and how do I get service?

The Conair CS31N comes with a 5-year limited warranty. To obtain service, return the defective product with your purchase receipt and $7.00 for postage and handling to the service center listed in the manual.

Does the straightener have automatic shut-off?

Yes, the unit will shut itself off automatically after 60 minutes of inactivity. However, you should turn it off and unplug it when not in use.

What type of plates does the CS31N have?

It features tourmaline-coated pure ceramic plates with a 'floating' design for even contact and smooth gliding, reducing frizz and static.

How many heat settings are available and what are they?

There are 5 ultra-high heat temperature settings: PowerLow (310°F), Low, Medium, Med-High, and High (410°F). Use lower settings for fine hair and higher for thick or wavy hair.

Can I use the straightener on wet hair?

No, hair should be clean and completely dry before using the straightening iron to avoid damage and ensure safety.

How should I store the straightener when not in use?

Allow the appliance to cool, then store it out of reach of children in a safe, dry location. Do not wrap the cord around the appliance; hang it loosely.

What should I do if the cord is damaged?

Stop use immediately if the cord is damaged or if the unit operates intermittently. Return it to an authorized service center for repair. Do not attempt to repair yourself.

Is the straightener safe to use in the bathroom?

No, keep the appliance away from water. Never use it while bathing or near a tub or sink. Electricity is dangerous even when the device is off.

What voltage is the CS31N compatible with?

The unit is designed for 120V AC, 60 Hz only. Do not use with an extension cord.

USER MANUAL CS31N Conair

USER MAINTENANCE Your straightening iron is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your appliance is easy to store. Allow appliance to cool, then simply store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG SMALL APPLIANCES

LIMITED FIVE-YEAR WARRANTY

Conair will repair or replace (at our option) your unit free of charge for 60 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and \$7.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 5 years from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED I DURATION TO THE 60-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, dental, or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Service Center

Service Department

7475 N. Glen Harbor Blvd

Glendale, AZ 85307

For information on any Conair or Infiniti by Conair

product call 1-000-3-CONAIR of visit us on the at: www.conair.com/infiniti

©2009 Consir Corporation

150 Milford Road, East Windsor, NJ 08520

7475 N. Glen Harbor Blvd., Glendale, AZ 85307

Patent Pending

08NP10513

tourmaline-coated pure ceramic straightener

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER

DANGER — Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1. Always unplug appliance immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
   can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other liquid
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING — To reduce the risk of

1. This appliance should never be left unattended when plugged in.
2. Do not pull, twist, or wrap line cord
   around appliance.

3. This appliance should not be used by, on or near children or individuals with certain disabilities.

4. Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.

5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any opening.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Unit is hot when in use. Do not let eyes or bare skin touch heated surfaces.
11. Do not place the heated unit directly on any surface while it is hot or plugged in.
12. Never block the air openings of the appliance or place on a soft surface such as a bed or couch, where the air openings may be blocked. Keep the air opening free of lint and other debris.
13. Do not use an extension cord with this appliance.
14. Do not touch hot surfaces of the appliance. Use handles or knobs.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This straightening iron is intended for household use. Use on Alternating Current (60 hertz) only. This unit is designed to be operated at 120V AC.

This appliance has a polarized plug (one blade is wider than the other.) As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

TO STRAIGHTEN HAIR

Hair should be clean and completely dried before using the straightening iron. Plug the iron into an electrical outlet. Turn on unit. The Power/Low 310°F setting will become illuminated.

To turn off, press Off button (light will go off). Never leave your straightening iron on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically within 60 minutes.

WARNING: The straightening iron's pure ceramic plates will get very hot within a few seconds and should not be placed in contact with the skin after the straightening iron has been turned on.

GETTING STARTED

The iron's unique 5 ultra-high heat temperature settings and Instant Heat technology provide styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or hard-to-straighten hair, keep the heat setting on high. You can vary the iron's temperature according to your particular need!

Temperature Setting Guide

LED TEMP. CONTROL HAIR TYPE
Power/Low 285°F -310°F	Delicate, thin, easy-to-style hair
Medium 330°F Average-to-thick or treated hair
Med-High 360°F Thick or wavy hair
High/Max 395°F Hard-to-style hair

STYLING WITH NEW "FLOATING" EASY-GLIDE TOURMALINE-COATED PURE CERAMIC PLATES

The plates of your new straightening iron offer extra length for faster styling and the newest technology for better results. Surfaces are 100% pure ceramic, with a tourmaline coating for ultra smooth glide and extra easy cleanup – any residue from styling products wipes right off! The combination of ceramic and tourmaline evenly distributes heat to protect hair from damaging hot spots. Clouds of ions, naturally emitted when tourmaline is heated, eliminate flyaways and frizzies to leave hair silky smooth and shiny.
You'll notice the plates of your new iron give a little, or "float". This provides firmer, more even contact with hair, for better results when straightening.
The new tourmaline ceramic technology is a pleasure to work with, making styling your hair easier, and letting you achieve salon results at home.

USING INSTANT HEAT, THE 5 ULTRA-HIGH HEAT TEMPERATURE SETTINGS & UNIFORM HEAT RECOVERY SYSTEM

This styling iron features a ceramic heater that maintains temperature during use for precision styling. It heats up to the temperature you've selected for your hair type.

This Instant Heat technology has 5 ultra-high heat temperature settings. There is a temperature range that's gentle and safe for every type of hair, from the finest to the curliest and most resistant and helps you create the look you want. And that's not all. Conair's professional salon standards of engineering provide you with a uniform and improved heat recovery system that maintains the iron at constant temperatures. There is a constant surge of power to ensure that heat is continuously and quickly delivered for optimal styling results, unlike other units, which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.

Conail Corporation Service Department

7475 N. Glen Harbor Blvd

Glendale, AZ 85307

©2009 Conair Corporation

150 Milford Road, East Windsor, NJ 08520

7475 N. Glee Harn Detests en trímito

08NP10513

infiniti Pro by CONAR™