82-8152 - Speaker stand Metra - Free user manual and instructions

Product Type	Speaker Stand
Brand	Metra
Model	82-8152
Compatible Speaker Size	Up to 8 inches
Weight Capacity	50 lbs (22.7 kg)
Height Range	30-60 inches (76-152 cm)
Base Diameter	12 inches (30.5 cm)
Material	Steel
Finish	Black textured powder coat
Adjustment Type	Height adjustable with locking pin
Assembly Required	Yes, simple tool-free assembly
Included Accessories	Mounting hardware, rubber feet
Weight (each)	5 lbs (2.3 kg)
Cable Management	Built-in cable routing channel
Cleaning Instructions	Wipe with a damp cloth, avoid abrasive cleaners
Safety Certification	Meets ANSI/SIA standards for stability
Warranty	1-year limited warranty
Country of Origin	China
Spare Parts Availability	Replacement parts available from Metra

Frequently Asked Questions - 82-8152 Metra

How do I assemble the Metra 82-8152 speaker stand?

Assembly is straightforward: attach the base to the pole using the included locking pin, then place the top plate. No tools are required. Ensure all connections are tight before mounting the speaker.

What is the maximum weight capacity of this stand?

The stand can support up to 50 lbs (22.7 kg). Exceeding this limit may cause instability and damage.

Can this stand be used with any speaker?

It is designed for speakers up to 8 inches in size. Ensure your speaker has a compatible mounting hole pattern (usually 1/4-20 thread).

Is the height adjustable?

Yes, the stand adjusts from 30 to 60 inches using a locking pin mechanism. Simply remove the pin, slide the tube to desired height, and reinsert the pin.

Does it come with a warranty?

Metra offers a 1-year limited warranty against manufacturing defects. Keep your receipt for proof of purchase.

How do I clean the speaker stand?

Use a damp cloth to wipe down the stand. Avoid harsh chemicals or abrasive sponges that could damage the finish.

Can I use this stand outdoors?

The stand is designed for indoor use. Prolonged exposure to moisture or extreme temperatures may cause rust or finish damage.

Are spare parts available if something breaks?

Yes, replacement parts such as base plates, poles, and locking pins can be ordered directly from Metra. Contact customer support for details.

How do I ensure the stand is stable?

Place the stand on a level surface and tighten all joints. For added stability, you can fill the base with sand or water (not included).

Does the stand have cable management?

Yes, the pole features a cable routing channel to hide wires from the speaker to the floor, keeping your setup tidy.

USER MANUAL 82-8152 Metra

Speaker Adapter Bracket

IMPORTANT

Before starting, compare items on your invoice with items received. Thoroughly check packing materials. If an item is missing, please call Crutchfield at 1-888-955-6000.

120828152

Revision 3/27/2024

IMPORTANT

It may be necessary to cut the screws used to mount the speaker to the adapter bracket in order to allow the speaker/bracket assembly to sit flush in the vehicle location.

1. Secure speaker to adapter bracket. Cut the ends off of the screws used to mount the speaker to the bracket if they extend past the bracket.
2. Make wiring connections to vehicle.
3. Secure speaker/bracket assembly to vehicle location.

Two black plastic mechanical flange components with mounting holes, shown against a white background (no text or symbols)

Parts Supplied:

(2) Speaker Adapter Brackets
(8) 3/4" Screws

CRUTCHFIELD®

Copyright 2024 Crutchfield Corporation