WF1608RSE - Electric fan Khind - Free user manual and instructions

Product Type	Wall Fan
Brand	Khind
Model	WF1608RSE
Power Supply	220-240V, 50Hz
Power Consumption	50W
Speed Settings	3 speeds (Low, Medium, High)
Oscillation	Yes, 90° left/right
Airflow	150 m³/min
Blade Diameter	16 inches
Net Weight	3.8 kg
Gross Weight	4.5 kg
Product Dimensions (W x D x H)	450 x 200 x 510 mm
Package Dimensions (W x D x H)	520 x 240 x 580 mm
Noise Level	≤ 60 dB
Remote Control	Yes, included
Control Type	Push button + remote
Tilt Adjustment	Manual, up/down
Installation	Wall mount with included hardware
Material	ABS plastic body, metal blade
Color	White
Safety Features	Overheat protection, stable mount
Cleaning	Unplug and wipe with damp cloth
Warranty	1 year

Frequently Asked Questions - WF1608RSE Khind

How do I install the Khind WF1608RSE wall fan?

Install the fan by mounting the bracket to the wall using the provided screws and plugs. Ensure the bracket is level and securely attached. Then hang the fan on the bracket and tighten the locking screw. Always check local electrical codes and consider hiring a professional.

Can the fan be used without the remote control?

Yes, the fan has manual push buttons on the unit for power, speed, and oscillation control. The remote is an additional convenience.

How do I clean the Khind WF1608RSE?

Always unplug the fan before cleaning. Use a soft damp cloth to wipe the body and grill. Do not use abrasive cleaners or immerse in water. For deeper cleaning, you may remove the front grill after unscrewing it.

Does the fan oscillate?

Yes, the Khind WF1608RSE features an oscillation function that rotates the fan head up to 90 degrees left and right for wider air distribution. You can turn oscillation on or off via the remote or the oscillation button on the unit.

What replacement parts are available?

Common replacement parts include the blade, front grill, remote control, and mounting bracket. Contact Khind customer service or authorized dealers for genuine parts. Check the user manual for part numbers.

Is the fan suitable for outdoor use?

No, this fan is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the fan and create safety hazards. Use it in a dry, covered area.

Why is the fan making a rattling noise?

Rattling noise may occur if the blade is loose or unbalanced. Turn off and unplug the fan, then check the blade assembly. Tighten any loose screws. If the noise persists, check for foreign objects or contact support.

How many speed settings does the fan have?

The Khind WF1608RSE offers three speed settings: Low, Medium, and High. You can adjust the speed using the remote or the manual speed button on the fan.

What is the power consumption of the fan?

The fan has a power consumption of 50 Watts at maximum speed, making it energy efficient. It operates on 220-240V, 50Hz.

How do I reset the fan if it stops working?

If the fan suddenly stops, unplug it for 5 minutes to reset the motor thermal protector. Check the power cord and outlet. If it still does not work, contact Khind support for assistance.

USER MANUAL WF1608RSE Khind

Press the ON/SPD/OFF button to switch ON, select the fan speed & switch OFF the fan.

The fan will start at LOW speed.

This button serves to turn ON or OFF the fan oscillation.

此按钮用于打开或关闭风扇振荡。

Notes / Nota / 注意

1. After the fan has switched off, all preset functions will be cleared. The fan must be set if it is needed to operate again. Selepas kipas telah dimatikan, semua fungsi akan berada pada kedudukan awal.

风扇关闭后，所有铺设功能都将被清阶。

如果需要再次操作，必须设置风扇

如果需要有关操作，必须设置风险。

1. The fan can be started only with the ON/OFF button. King bolch dimvulge heavy deoep butres ON/OFF

只能使用ON/OFF按钮启动风扇

1. The fan remote control is operated by 2 standard batteries AAA 1.5V

2. The fan remote controls operated by 2 standard batteries AAA 1 Alat kawalan iauh kinas dikendalikan oleh 2 bateri standard AAA 1.5V.

The SPEED and ON/OFF button may use as manual control switches.

The functions same as remote controller.

Silhouette of a globe with Earth and oceans, no text or symbols visible

••• Wall Fan / Kipas Dinding / 壁扇

Instruction Manual / Buku Panduan / 说明指示十书

Important / Mustahak / 重要

Please read this manual carefully before operating this product. Keep this manual handy for further reference. Sila baca buku panduan ini dengan teliti sebelum menggunakan produk ini. Simpanlah untuk rujukan masa depan. 请在使用此产品前，详读此说明书，并将之收藏以作日后参考

1 - Guard Ornament / 装饰盖 Penghadang Hiasan
2-Front Guard/前护网
Penghadang Hada
3 - Spinner/ 机头率 Pemutar
4-Guard Ring/网圈
Gelang Penghadang
5 - Fan Blade / Bilah Kings
6 - Rear Guard Lock / 风扇叶 Kunci Penghadang Belakang
7 - Rear Guard / 后护网 Penghadang Belakang

8-Guard Clip / 后护网 Penghadang Belakang
9-Motor Shaft/马达铀
Shaft Motor
10 - Motor Assembly / 马达主体与护盖 Sambungan Motor
11-Fan Body/风扇主体
Badan Kip
12 - Switch Panel / 开关面板 Panel Suis
13 - Power Supply Cord / 电源线 Kord Bekalan Kuasa
14 - Remote Control / 遥控 Alat Kawalan Jauh

ASSEMBLY INSTRUCTION / CARA-CARA PEMASANGAN / 装配指示

1. Fix wall bracket firmly with 2 screws. Pasang tapak di dinding dengan kemas. 镶锁紧所配给的铁托架于墙壁上。

1. Hang fan body to bracket. Remove Spinner (3) by turning clockwise direction and remove Rear Guard Lock (6) by turning anticlockwise direction. Gantungkan bodan kipas kepada tapak. Alihkan pemutar (3) dengan memusingkan ke arah pusingan jam dan alihkan kunci penghadang belakang (6) dengan memusingkan ke arah lawan jam. 铰紧风扇主体于铁托架上。向顺时针方向旋转，松解机头罩（5）向逆时针方向旋转，松解后护网固定螺旋栓（7）。