30GSC - Ceiling fan KDK - Free user manual and instructions

Product Type	Ceiling Fan
Brand	KDK
Model	30GSC
Fan Blade Diameter	30 inches (76 cm)
Number of Blades	5
Speed Settings	3 (Low, Medium, High)
Motor Type	AC Motor, Reversible
Summer/Winter Mode	Yes, via reverse switch
Control Method	Pull chain with 3-speed control
Optional Remote Control	Available separately
Light Kit Compatible	No
Maximum Airflow	Approximately 6,000 CFM
Power Source	120V AC, 60Hz (US) / 220V AC, 50Hz (Asia)
Energy Consumption	~60W at high speed
Weight	5.8 kg (12.8 lbs)
Mounting Type	Standard ceiling mount (downrod included)
Installation Location	Indoor only
Material	Steel motor housing, plastic blades
Certifications	CE, UL listed (region dependent)
Noise Level	< 50 dB
Cleaning Instructions	Wipe blades with damp cloth, no abrasive cleaners
Safety Features	Overheat protection, blade guard
Warranty	1 year limited warranty

Frequently Asked Questions - 30GSC KDK

How do I install the KDK 30GSC ceiling fan?

Ensure the ceiling bracket is securely attached to a structural beam. Follow the manual for wiring: connect the fan wires (black, white, green) to the house wires using wire nuts. Attach the motor to the bracket, then install the blades and pull chain. Turn on power and test.

What is the recommended cleaning method for the fan?

Turn off the fan and let it stop. Use a soft, damp cloth to wipe the blades and motor housing. Avoid using water directly on the motor. Do not use harsh chemicals or abrasive pads.

Can I use the fan in winter?

Yes, the KDK 30GSC has a reversible motor. In winter, set the fan to rotate clockwise at low speed to push warm air trapped near the ceiling down, improving heating efficiency.

My fan is wobbling. How can I fix it?

Check that the blades are properly aligned and all screws are tight. Use a balancing kit if provided. Ensure the ceiling mount is secure. An unbalance can also occur if a blade is bent; replace if necessary.

What should I do if the fan does not start?

First, check the circuit breaker and wall switch. Ensure the pull chain is set to an active speed. If still not working, check the wiring connections inside the canopy. If the motor hums but doesn't spin, the capacitor may need replacement.

Can I install a light kit on this fan?

The KDK 30GSC model is not designed to be light-kit compatible. Adding a light kit may affect performance and safety. If you need a light, consider a model that supports it.

Is the fan suitable for outdoor use?

No, the KDK 30GSC is rated for indoor use only. Exposure to moisture or extreme temperatures can damage the motor and pose safety risks.

How do I change the direction of rotation?

Locate the small reverse switch on the motor housing near the canopy. With the fan off, slide the switch to the opposite position. Turn the fan back on and verify the airflow direction.

What replacement parts are available for this fan?

Common replacement parts include blade sets, pull chains, and capacitors. Contact KDK customer support or authorized dealers. Always use genuine KDK parts for safety.

How loud is the fan at high speed?

The KDK 30GSC operates at a noise level below 50 decibels at maximum speed, comparable to a quiet conversation. If you hear unusual noises, check for loose screws or blade misalignment.

USER MANUAL 30GSC KDK

KDK Company, Division of PES

Head Office : 4017, Takaki-cho, Kasugai, Aichi, Japan

Printed in Japan

Impreso en el Japón

พิมพ์ที่อยู่ปน

proble في الابان

45GSC 60GTC

•

INSTALLATION CAUTIONS

PRECAUCIONES A TOMARSE AL HACER LA INSTALACION

In The Kingdom of Saudi Arabia, this Ian is to be installed so that the blades are more than 2.3m above the floor in compliance with Saudi Arabian standard.

[25GSC, 30GSC, 35GSC]

[40GSC, 45GSC, 50GSC, 60GSC 45GTC, 50GTC, 60GTC]

1	Frame	Armazón	###	الإNPAR
2	Nut	Tuerca	###	###
3	Motor	Motor	###	###
4	Motor support	Soporte del motor	###	###
5	Blade	Cuchilla	###	###
6	Power cord	Cordón de la corriente	###	###
7	Fitting hole 8	Agujero de montaje 8	###	###
8	Fitting hole 4	Agujero de montaje 4	###	###

Model Modeloالنوبيل	A	B	C	D	E	F	G	H
25GSC	327	298	165	—	171	10 dia.	—	250 dia.
30GSC	378	349	210	—	200	10 dia.	—	300 dia.
35GSC	467	434	250	—	236	12 dia.	—	350 dia.
40GSC	518	485	280	460	274	12 dia.	12 dia.	400 dia.
45GSC	570	540	320	—	297	12 dia.	—	450 dia.
50GSC	659	620	355	560	315	15 dia.	15 dia.	500 dia.
60GSC	760	720	400	650	320	15 dia.	15 dia.	620 dia.
45GTC	570	540	320	—	297	12 dia.	—	450 dia.
50GTC	659	620	355	560	304	15 dia.	15 dia.	500 dia.
60GTC	760	720	400	650	320	15 dia.	15 dia.	620 dia.

During installation and carrying work, take special care not to deform the blade. If the blade is deformed, troubles such as unbalance or vibration may occur.

[25GSC, 30GSC, 35GSC]

1. Loosen the blade setscrew to remove the blade.

2. Afloje el tornillo de sujeción de cuchilla para remover la cuchilla.

3. ٤٠٣٥٢٣٥٣٣ وَمُدْرَهِبُّةٍ مُدْرَهِبُّةٍ مُدْرَهِبُّةٍ مُدْرَهِبُّةٍ مُدْرَهِبُّةٍ مُدْرَهِبُّةٍ مُدْرَهِبُّةٍ مُدْرَهِبُّةٍ مُمْتَّاً أَحْل بِرْغَيَّ تَنْبِيْت رِيْشَة لِنْرَوْحَة لِنْزَعِ الْرِيْشَةٍ

4. Remove the wiring cover setscrew and exchange the yellow and red wires according to the wiring diagram.

5. Remueva el tornillo de la cubierta de alambrado y efectue el intercambio de los alambres amarillo y rojo de acuerdo con el diagrama de alambrado. Después de esto, vuelva a instalar la cubierta de alambrado en la posición original.

6. กองทะบุตวะรุพของตลับสายไฟแล้วดับเปลี่ยนสายไฟสีเหลืองกับสีแดงตามภาพอธิบายการเดินสายไฟ

7. أَنْزَعْ بِرْغَي تُفْبِتْ غطَاء أَسْلَكَ الْتَوْصِيلِ وَبِدَلِ الْأَسْلَكَ الصفراء وَالخمراء قِبما بِنْهَا طَبْقَا لِلَّرِسمِ النَخَطْبِطِي لُنْوَصِيلِ الْأَسْلَكَ.

[40GSC, 45GSC, 50GSC, 60GSC]

1. Loosen the hexagonal nut to remove the blade. (For 40GSC. Loosen the blade setscrew)
2. Afloje la tuerca hexagonal para remover la cuchilla. (Para 40GSC, afloje el tornillo de sujeción de la cuchilla)
3. ไขตะบูเกลียวหัวใหญ่เพื่อถอดใบพัต (สำหรับ 40GSC ไขตะบูทางชุดของใบพัต)
   . . فك الصمولة السداسية و ذلك لنزع ريشة المروحة. (للموديل 40GSC، فلك برفي ثنيست الريشه).
4. Remove the two (2) wiring box setscrews and exchange the yellow and red wires according to the wiring diagram. After exchanging, re-install the wiring box in its original position.
5. Remueva los dos (2) tornillos de la caja de alambrado y cambie los alambres amarillo y rojo uno con el otro de acuerdo con el diagrama de alambrado. Después de esto, vuelva a instalar la caja de alambrado en la posición original.

6. ดอตะบุควชุด 2 ตัวของหลับสายไฟออก แล้วดับเปลี่ยนสายไฟ สิเหลืองกับตันตงตามภาพอธิบายการเดินสายไฟหลังจากสับเปลี่ยน แล้วอิตดลัยสายไฟเข้าไปในตําแหน่งเติม

7. أسرغ بргيئى (١) تثبیت صندوق أسلاک التوصیل نُم بدل الأسلام Pharmaceuticals و الحمراء فيه ينها و ذلك حسب مخطط åسلات التوصیل ب Equipment ذلك، أحمد تركیب صندوق أسلاک التوصیل إلى مکانه الأصلی

8. Mount the blade in reverse position and tighten securely with the hexagonal nut.

9. Instale la cuchilla en la posición inversa y apriétela completamente con la tuerca hexagonal.
10. ยกใบพัตกลับตําแหนดและยืดไหผนตามวยตร์เกลี่ยวหัวใหญ่

Wiring Diagram

[45GTC, 50GTC, 60GTC]

1. Reverse two of the three wires for the power supply.
2. Invierta dos de los tres alambres de la fuente de alimentación

3. ล้อสายไฟ 2 สายในรํานวน 3 สายเพื่อให้จ่ายกําลังไฟฟ้า

4. أعكس سلكين من الأسلامك الثالثة لترتيب الطاقة

If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.