30KQT - Ceiling fan KDK - Free user manual and instructions

Product Type	Ceiling Fan
Brand	KDK
Model	30KQT
Blade Span	30 inches (76 cm)
Overall Height	Approx. 12 inches (30 cm)
Weight	Approx. 5.0 kg (11 lbs)
Power Supply	220-240 V AC, 50/60 Hz
Motor Power	50 W
Speed Settings	3-speed pull chain control
Reversible Direction	Yes (summer/winter mode)
Light Kit Compatible	No (fan only)
Remote Control	Not included (optional)
Installation	Mounting on ceiling, requires secure fixing
Cleaning	Wipe with soft damp cloth, avoid water on motor
Lubrication	Sealed bearing, no lubrication required
Safety Features	Overheat protection, balanced blades
Spare Parts Available	Blades, pull chain, mounting kit
Repairability	Authorized service centers recommended
Warranty	2 years (subject to terms)
Country of Origin	Japan

Frequently Asked Questions - 30KQT KDK

How do I clean the 30KQT ceiling fan?

Turn off the fan and let it stop completely. Use a soft damp cloth to wipe the blades and motor housing. Avoid using water directly on the motor or electrical parts. Do not use abrasive cleaners.

Can I install this fan on a sloped ceiling?

The 30KQT is designed for flat ceilings. For sloped ceilings, a special mounting adapter may be required. Check with a qualified electrician.

Does the fan come with a remote control?

No, the standard model uses a pull chain for speed and direction control. A separate remote control kit may be available as an accessory.

What is the blade span of the 30KQT?

The blade span is 30 inches (76 cm), making it suitable for small to medium-sized rooms.

How do I change the direction of the fan?

Locate the reverse switch on the motor housing. Slide it to the opposite position. For summer, set counterclockwise; for winter, clockwise.

Is the fan compatible with a light kit?

No, the 30KQT is a fan-only model. It does not have a light kit attachment.

What is the maximum ceiling height for safe installation?

The fan should be installed with blades at least 7 feet (2.1 m) above the floor. Ensure there is at least 12 inches (30 cm) clearance from the ceiling.

The fan wobbles, what should I do?

Check that the blades are securely fastened and not bent. Use a balancing kit if included. Ensure the mounting bracket is tight.

What is the noise level of this fan?

KDK fans are known for quiet operation. The 30KQT typically operates below 40 dB, depending on speed setting.

Where can I find spare parts?

Spare parts such as blades, pull chains, and mounting hardware are available through authorized dealers or the KDK website. Use only genuine parts.

USER MANUAL 30KQT KDK

Operating Instructions

การแนะนำวิธีการใช้

使用説明書

تعليمات التشفيل

Ventilating Fan

พัตถมระบายอากาศ

排氣風扇

مراوح التهوية

30KQT

40KQT

Technical line drawing of a fan or impeller assembly with mounting brackets (no text or symbols)

Before operating this set, please read these instructions completely.

In the Kingdom of Saudi Arabia, this fan must be installed at a height of 2 m and above. in compliance with Saudi Arabian Standard.

Tighten the screw that secures the ground wire.

Technical line drawing of a fan or vent assembly with mounting holes and wiring (no text or symbols)

2 pieces each (30KUT)

3 pieces each (40KUT)

Tighten the two screws that secure the electrical box, while paying attention not to catch the lead wire. Secure the power cord with the cord clip.

(B) Installing on a concrete surface

* Install the unit by using stud bolts.

Appropriately ground the fan.

(D) การต่อลงดิน