PR-0402 - HDMI switch AMX - Free user manual and instructions

Product Type	4x2 4K60 HDMI Matrix Switcher
Brand	AMX
Model	PR-0402
Number of HDMI Inputs	4
Number of HDMI Outputs	2
Maximum Resolution	4K @ 60Hz
Power Supply	12V DC, 3A
Power Consumption (Max)	9.8 W
Power Adapter Included	Yes, with US, EU, UK, AU pins
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	5% to 90% (non-condensing)
Storage Humidity	5% to 90% (non-condensing)
Switching Modes	Auto and Manual
Auto Switching Priority	HDMI1 > HDMI2 > HDMI3 > HDMI4
Mounting Options	V-Style surface brackets, single module pole kit, rack shelf
Audio Output	Yes, via 3-pin terminal block
IP Address Display	Via OSD by pressing RESET ID button twice
Included Accessories	Power adapter with 4 pin sets, 3 terminal blocks, 4 rubber feet
Control Interface	Front panel, API, web interface
Dimensions (Approx)	1.7" H x 8.5" W x 6.3" D (43 x 216 x 160 mm)

Frequently Asked Questions - PR-0402 AMX

How do I switch between inputs on the PR-0402?

If auto-switching is disabled, press the Output Select button for the desired output, then press the Input Select button for the source you want. You can also use the web interface or API commands.

Can I enable auto-switching?

Yes, press the AUTO button on the front panel, or use API commands or the web interface. When enabled, the switcher automatically routes the highest priority active input (HDMI1 > HDMI2 > HDMI3 > HDMI4).

What is included in the box?

The package includes the PR-0402 switcher, a 12V/3A DC power adapter with US, EU, UK, and AU pin sets, 3 three-pin terminal blocks, and 4 rubber feet.

How do I find the IP address of the PR-0402?

Press the RESET ID button twice. The OSD will display the current IP address on the connected displays. You can then access the web interface.

Can the PR-0402 be rack mounted?

Yes, it can be mounted using V-Style surface mounting brackets, a single module pole mounting kit, or the NMX-VRK V-Style Rack Shelf. See www.amx.com for details.

What is the maximum resolution supported?

The PR-0402 supports resolutions up to 4K @ 60Hz (4K60) on HDMI inputs and outputs.

What are the power requirements?

The device requires a 12V DC power supply with a minimum of 3A. Maximum power consumption is 9.8W.

What is the operating temperature range?

The operating temperature is 32°F to 104°F (0°C to 40°C). Storage temperature is -4°F to 140°F (-20°C to 60°C).

How do I reset the PR-0402?

There is a RESET ID button on the front panel. Pressing it twice shows the OSD with IP info. For a factory reset, refer to the full instruction manual on www.amx.com.

Where can I find the full instruction manual?

Additional documentation, including the Instruction Manual - Precis PR-Series Matrix Switchers, is available at www.amx.com. You can also find important safety instructions there.

USER MANUAL PR-0402 AMX

This guide pertains to the PR-0402 Precis 4x2 4K60 HDMI Switcher. The purpose of this document is to illustrate how the device is to be installed and set up in its simplest configuration by a trained technician.

What's in the box

The following items are included with the PR-0402

• [1] 12V/3A DC Power Adapter
• [1] US Pins
• [1] EU Pins
• [1] UK Pins
• [1] AU Pins
• [3] 3-Pin Terminal Blocks
• [4] Rubber Feet

Power

Active power requirements:

• Voltage, DC: 12V/3A
• Power consumption (max): 9.8W

Environmental Requirements

The environmental requirements for the PR-0402 are as follows:

• Operating Temperature: 32^ (0°C) to 104^ (40°C)
  • Storage Temperature: -4^ ( -20^ ) to 140^ ( 60^ )
• Operating Humidity: 5% to 90% (RH (non-condensing))
  • Storage Humidity: 5% to 90% (RH (non-condensing))

Installation

1. Attach the proper cables from HDMI video source (such as a PC, Blu-ray player, game console, satellite/cable box, media server, etc.) to HDMI Input 1 on the 4x2 HDMI matrix switcher. Continue for HDMI Input 2-4.
2. Attach the proper cables from the HDMI matrix switcher HDMI Outputs to displays, projectors or other sink devices.
3. If required, connect an AV receiver, amplifier or other audio device to the audio output port on the PR-0402.
4. Power on PR-0402 using the correct DC power cable (supplied in the box) that meets your location's requirements

Switching Operation

PR-0402 supports Auto switching and Manual control modes. Auto switching can be enabled or disabled using the AUTO button on the front panel, API Commands, or via the on-board web interface.

A. When Auto switching is enabled, the unit automatically switches following the rules below:
1. If more than one input port has an active signal when the switcher boots, the priority order is: HDMI1 => HDMI2 => HDMI3 => HDMI4
2. When a new active signal is connected to an input, that input will be routed to both outputs.
3. If the currently routed input is removed, the previous most recently selected input will be routed to both outputs.

B. Manual switching is allowed only when Auto switching is disabled. To make a switch using manual mode:

1. Press the appropriate Output Select Button
2. Press the appropriate Input Select Button

Mounting Options (Rack Trays and Mounting Brackets)

The PR-0402 can be mounted using V Style Surface Mounting Brackets, V Style Single Module Pole Mounting Kit, or the NMX-VRK V-Style Rack Shelf. For details, see www.amx.com.

Identify the IP address of the PR-0402

Press the RESET ID button twice to show the OSD INFO, and then the current IP address will be presented on the displays connected to the HDMI OUT ports.

AMX Precis PR-Series Matrix Switcher Instruction Manual

Additional documentation for this device is available at www.amx.com. Refer to the Instruction Manual - Precis PR-Series Matrix Switchers for additional details on installing, upgrading, and controlling the device.

See the Important Safety Instructions, available to view or download from the www.amx.com.