B996 - Office chair BOSS - Free user manual and instructions

Product Type	Office Chair
Brand	BOSS
Model	B996
Overall Height	110 - 120 cm (adjustable)
Seat Width	50 cm
Seat Depth	48 cm
Seat Height Adjustable Range	42 - 52 cm
Weight Capacity	120 kg
Net Weight	15 kg
Frame Material	Steel
Seat Material	Fabric
Armrests	Adjustable height armrests
Backrest Angle Adjustment	90° - 130°
Lumbar Support	Adjustable
Headrest	No
Gas Lift	Class 3
Base Type	5-star aluminum base
Caster Size	50 mm
Caster Material	PU (suitable for hard floors)
Certifications	ANSI/BIFMA X5.1
Warranty	5 years
Assembly Required	Yes (instructions included)
Cleaning Instructions	Wipe with damp cloth, mild detergent

Frequently Asked Questions - B996 BOSS

How do I adjust the seat height on the BOSS B996 chair?

Locate the lever under the seat. While seated, pull the lever upward to release the gas lift, then adjust your weight to lower or rise to the desired height. Release the lever to lock.

Can the armrests be adjusted?

Yes, the armrests are height-adjustable. Press the button on the side of each armrest and move it up or down to your preferred position.

What is the maximum weight capacity of this chair?

The BOSS B996 office chair has a maximum weight capacity of 120 kg (265 lbs). Please do not exceed this limit.

How do I clean the fabric seat?

For regular cleaning, vacuum the fabric using a brush attachment. For stains, use a mild detergent mixed with water, apply with a soft cloth, and blot gently. Allow to air dry completely.

Does the chair come with a headrest?

No, the BOSS B996 model does not include a headrest. It features an adjustable backrest and lumbar support for ergonomic comfort.

How do I adjust the backrest tilt?

Use the knob under the seat on the right side to adjust the tilt tension. To lock the backrest in an upright position, push the lever (usually under the seat) forward. To recline, lean back and pull the lever.

What tools are needed for assembly?

Assembly requires a Phillips screwdriver and an Allen wrench (usually included). Detailed instructions are provided in the manual.

Is the chair suitable for hard floors?

Yes, the chair comes with PU casters that are designed to be gentle on hard floors such as wood, tile, or laminate.

What is the warranty period?

The BOSS B996 office chair comes with a 5-year warranty covering manufacturing defects. This does not cover normal wear and tear.

Can I replace the gas lift if it fails?

Yes, the gas lift is a replaceable part. You can order a compatible class 3 gas lift from BOSS or an authorized dealer. Follow the manual for replacement instructions.

USER MANUAL B996 BOSS

IMPORTANT NOTICE: HARDWARE PACKAGE IS ATTACHED ON THE BOTTOM OF SEAT CUSHION.

MODEL: B996

(1)x1	(2)x1	(3)x1 (L)x1 (R)
Back	Seat & Mechanism	ARM
(4)x5	(5)x1	(6)x1
Casters	Gas Lift	Base
(A)x4 M8*30 L-BAR SCREW(B)x6 M6*25 ARM SCREW

Line drawing of an office chair with a downward arrow indicating motion (no text or symbols)

Line drawing of an office chair with adjustable armrests and wheels (no text or symbols)

Insert and loosely tighten all screws. When assembly is completed, fully tighten all screws before using. This chair is only intended for sitting. Any other use will void the warranty.