GST160A12-R7B - Charger Mean Well - Free user manual and instructions

Product Type	AC/DC Desktop Power Supply (Charger)
Input Voltage Range	100-240 VAC, 50/60 Hz
Output Voltage	12 VDC
Output Current	13.33 A
Output Power	160 W
Efficiency	> 90% (typical)
Protection Features	Overload (OCP), Overvoltage (OVP), Overtemperature (OTP), Short Circuit (SCP)
Dimensions (L x W x H)	199 x 98 x 42 mm
Weight	Approx. 670 g
Input Connector	IEC 320-C14 (with detachable AC cord)
Output Connector	4-pin DIN (depending on variant R7B)
Cooling Method	Convection (fanless)
Operating Temperature	-30°C to +70°C (derating above 50°C)
Storage Temperature	-40°C to +85°C
Safety Certifications	UL/cUL, CB, CE, FCC, CCC
MTBF	> 100,000 hours (MIL-HDBK-217F)
Warranty	3 years (standard Mean Well warranty)
Cleaning Instructions	Disconnect from power; wipe with dry cloth; avoid liquids.
Maintenance	No user-serviceable parts; contact qualified technician for repairs.

Frequently Asked Questions - GST160A12-R7B Mean Well

What is the output voltage and current of the Mean Well GST160A12-R7B?

The output is 12 VDC at 13.33 A, providing up to 160 W of power.

What input voltage range does this charger support?

It accepts 100-240 VAC at 50/60 Hz, making it suitable for worldwide use.

Is the GST160A12-R7B suitable for LED strip lighting?

Yes, it can power 12V LED strips as long as the total current draw does not exceed 13.33 A.

What type of output connector does the R7B variant use?

The R7B typically features a 4-pin DIN connector; verify your device's compatibility.

Does this power supply have overload protection?

Yes, it includes overload protection (OCP) along with overvoltage, overtemperature, and short circuit protection.

Can I use the GST160A12-R7B for battery charging?

It is not specifically designed as a battery charger. Use a proper CC/CV charger for batteries.

What is the efficiency rating of this power supply?

Typical efficiency is >90% under normal load conditions.

Is the unit fanless?

Yes, it uses convection cooling (fanless) for silent operation.

What certifications does the GST160A12-R7B hold?

It is certified with UL/cUL, CB, CE, FCC, and CCC safety standards.

How can I clean the power supply?

Unplug it and wipe the exterior with a dry cloth. Do not use liquids or immerse in water.

USER MANUAL GST160A12-R7B Mean Well

Adaptor is a kind of external switching power supply, which is designed to connect pieces of electrical equipment externally. Mean Well's adaptor types include industrial, moisture proof, and medical.

- Installation

(1) Before attaching the DC plug of an adaptor to equipment, please unplug the adaptor from the AC power and verify the unit is within the voltage and current rating on the equipment.
(2) Keep the linkage between the adaptor and its power cord tightly as well as connecting the DC plug to equipment properly.
(3) Protect the power cord from being trodden on or being squashed.
(4) Keep good ventilation for the unit in use to prevent it from overheating. Also a 10-15 cm clearance must be kept when the adjacent device is a heat source.
(5) An approved power cord should greater or equal to SVT, 3G×18AWG or H03VV-F, 3G×0.75mm ^2 .
(6) If the final equipment is not used for long period of time, disconnect the equipment from power supply to avoid being damaged by voltage peaks or lightning strike.
(7) For other information about the products, please refer to www.meanwell.com for details.

● Warning / Caution !!

(1) Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do not remove the case of the adaptor by yourself!
(2) Risk of fire or electrical shock. The openings should be protected from foreign objects or dripping liquids.
(3) Using wrong DC plug or forcing a DC plug into an electronic device may damage the device or cause to malfunction. Please refer to DC plug compatibility information shown in specification sheets.
(4) Adaptors should be placed on a reliable surface. A drop or fall could cause damage.
(5) Please do not put adaptors in places with high moisture or near the water.
(6) Please do not put adaptors in places with high ambient temperature or near fire source. About the maximum ambient temperature, please refer to their specifications.
(7) Output current and output wattage must not exceed the rated values on specifications.
(8) Disconnect the unit from the AC power before cleaning. Do not use any liquid or aerosol cleaner. Only use a damp cloth to wipe it.
(9) Please contact your local qualified recyclers when you want to dispose this product.

Manufacturer :

MEAN WELL ENTERPRISES Co., LTD.

No.28, Wuquan 3rd Rd., Wugu Dist.,

New Taipei City 24891, Taiwan

Tel: [phone]

Web: www.meanwell.com

Branch Office :

China

MEAN WELL (GUANGZHOU)

ENTERPRISES Co., LTD.

2F, A Building, Yuean Industry Park,

Huangcun, Dongpu Yown, Tianhe

District, Gungzhou, China

Post Code:510660

Tel: [phone]

Web: www.meanwell.com.cn

U.S.A.

MEAN WELL USA, INC.

44030 Fremont Blvd., Fremont,

CA 94538, U.S.A.

Tel: [phone]

Web: www.meanwellusa.com

Europe

MEAN WELL EUROPE B.V.

Langs de Werf 8, 1185XT

Amstelveen, The Netherlands

Tel: [phone]

Web: www.meanwell.eu