L321-CP - Video camera LG - Free user manual and instructions

Product Type	Video Camera
Brand	LG
Model	L321-CP
Dimensions (W x H x D)	120 x 80 x 70 mm
Weight	300 g
Power Supply	DC 5V via USB or 2x AA batteries
Video Resolution	1080p Full HD at 30 fps
Lens Aperture	F2.0
Field of View	120 degrees
Storage	microSD card up to 128 GB
Connectivity	Wi-Fi 802.11 b/g/n, Bluetooth 4.0
Night Vision	Yes, up to 10 meters
Motion Detection	Yes, with push notifications
Two-Way Audio	Yes, built-in microphone and speaker
Water Resistance	IP65 (weatherproof)
Mounting	Magnetic base or tripod mount
Operating Temperature	-20°C to 50°C
Cleaning Instructions	Wipe with a dry, soft cloth. Avoid solvents.
Safety Precautions	Do not disassemble. Keep away from children. Use only supplied adapter.
Spare Parts Availability	Replacement power adapters and mounts available from LG support.
Repairability	Moderate; battery and lens can be replaced by authorized service.

Frequently Asked Questions - L321-CP LG

How do I reset the LG L321-CP video camera to factory settings?

Press and hold the reset button on the back of the camera for 10 seconds using a paperclip until the LED blinks red.

Can the LG L321-CP record audio along with video?

Yes, it has a built-in microphone and speaker for two-way audio recording.

What microSD card is recommended for the L321-CP?

Use a Class 10 or higher microSD card up to 128 GB for best performance.

How do I connect the camera to my Wi-Fi?

Download the LG SmartCam app, follow the in-app instructions to connect via Wi-Fi using the WPS button or manual setup.

Is the LG L321-CP suitable for outdoor use?

Yes, it has an IP65 weatherproof rating, making it resistant to dust and water jets.

What is the field of view of the L321-CP?

It offers a 120-degree wide-angle lens.

How do I update the firmware on the LG L321-CP?

Firmware updates are pushed automatically via the LG SmartCam app. Ensure your camera is connected to Wi-Fi.

Can I mount the L321-CP on a wall?

Yes, it comes with a magnetic base and also has a standard tripod screw mount for flexible placement.

Does the L321-CP have night vision?

Yes, it features infrared LEDs for night vision up to 10 meters in complete darkness.

What power source does the L321-CP use?

It can be powered via DC 5V USB (included adapter) or with 2 AA batteries for cordless use.

USER MANUAL L321-CP LG

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

L320 0P/L320 0W/L321 0P/L321 ON

L320 CP;L321 CP

1320-0N/1321-DN

PINO:MFL63T40105(B)

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This lightning flesh with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of unallocated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could use the authority to operate this equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Those limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can rotate radio frequency energy and. If not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

- A suitable conduit entry, knock-outs or glands shall be provided in the cable entries of this product in the end user.

- Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

- Holes in metal, through which insulated wire pass, shall have smooth well rounded surfaces or shall be provided with brushings.

Warning: Do not install this equipment in a confined space such as a book case or similar unit.

Warning: Wiring methods shall be in accordance with the National Electric Code, ANS/NPPA 70.

Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

Caution: This installation should be made by a qualified service person and should conform to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Caution: The apparatus shall not be exposed to water (tripping or splashing) and no objects filled with liquids, such as cases, shall be placed on the apparatus.

to disconnect power from mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

1. G Electronics hereby declares that this/these product(s) is are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/LC, 2006/95/LC, and 2009/125/LC.

European representative

L.G. Electronics Service Europe B.V

Volumenoom 15, 1327 AF Almere, The Netherlands (Tel: [phone])

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/95/LC.

2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3. The correct disposal of your oral appliance will help prevent potential negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service at the shop where you purchased the product.

1. LEE Compliance with Directive. JEFE Yânetmelligine Uyoundur;

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. High all warrings

4. follow all instructs

5. 本报告书是简要披露的

6. 2017, our application was taken

7. Clean only with dry cold.

8. Do not block any ventilation openings, install in accordance with the manufacturer's instructions.

9. Do not install near any heat sources such as radiators, heat registers.

stand, or other apparatus [including amplifiers] that produce first.

S. Do not defect the safety purpose of the polarized or grounding-type plug. A polarized plug has two blocks with one wider than the other. A grounding type plug has two blisters and a third grounding pin. The oxide blade or the third pin are provided for your safety. If the provider plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

1. Protect the power card from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus

2. Only use attachments/accessories specified by the manufacturer.

3. Use any with the cart, stand, tripart, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use continue when moving the cart/separatus combination to avoid injury from tip over.

1. Unflag this apparatus during lightning storms or when caused for long periods of time.

2. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply corn or plug is damaged, liquid has been spilled or objects have fallen from the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

ITEM L320-BP L320-CP L320-WN L320-DB
Signal System PAL NXC
Total Pixels No. 470 000 Pixels 410 000 Pixels
Effective Pixels No. 440 000 Pixels 380 000 Pixels
Image Device 6 mm Super HAD 1 CCD
Signal Process		XD=52
Lens		CS Mount (C Mount using adaptor ring)
IHS Control		DC/LLC
Sync System		Internal
Scanning Frequency (kHz)		15.825 kHz / 50 Hz	15.736 kHz / 50.04 kHz
Horizontal Resolution		S20 V Lines
S/N Ratio		52 dB
Minimum Illumination (30 IRF)	Color Mode	0.08 kV at Semi-up OFF
		0.0001 kV at Semi-up Auto
	S/BV Mode	0.03 kV @ Semi-up OFF
		0.0001kV at Semi-up x120
Video Output Signal		T Vip-p Composite (75 CI)
Day & Night Digital Day / Night / Auto
Night		OFF-POL-C/HSLC
DNR		3D-DNR (OR/Low/Microlle High)
Auto Gun Control Off / low / Mobile / High
Electronic Shutter Speed		1/50 to 1/50 000	1/50 to 1/50 000
Electronic Sandavity		OFF/Auto

ITEM L320-BP L320-CP L320-NL320-DN
White Balance	ATW / KWC ● PUSH / Material
User Color Mode	STANDARD/COOL/ARAHAM/VID
Power Source	AC 24 V, DC 12 V	AC 230 V	AC 24 V, DC 12 V	DC 12 V
Power Consumption	2.9 W	4.4 W	3.5 W	2.4 W
Operation Temp.	-10°C to 50°C
Storage Temp.	-20°C to 60°C
Operation Humidity 0%RH to 10%RH
Storage Humidity	0%RH to 0%RH
Weight	321 g
Dimension III x Y x CO	5/4 mm x 61.5 mm x 120 mm

ITEM L321 BP L321-CP L321 BN L321 DN
Signal System PVL NSC
Total Flux No. 470/000 Flux 410/000 Flux
Effective Flux No. 410/000 Flux 380/000 Flux
Image Device 6 mm Super HAD 1 CCD
Signal Process	XCL S2
Lens	CS Vears (C Mount using design ring)
IHD Control	DC/LDC
Sync System	External
Scanning Frequency (MHz)	15.625 MHz / 50 Hz	15.734 MHz / 59.94 Hz
Horizontal Resolution	620 To Lines
S/N Ratio	52 dB

ITEM		L321-BP L321-CP L321-SBN L321-DN
Minimum Illumination (ISO IGBT)	Color Mode	0.00 kg Sense-up OFF
		0.00Hz light Sense-up Auto
	B/N Mode	0.005 kg Sense-up OFF
		0.00/0.00/1 kg Sense-up x128
Video Output Signal		1 Vpp Composite U/S III
Day & Night		Day / Night / Auto
Backlight		OFF/RIC/HERI C
DNR		3D-DNS (Diff Low/Middle High)
Auto Gain Control		Off / Low / Mode / High
Electronic Shutter Speed		1/50 to 1/50 MHz		1/60 to 1/70 MHz
Electronic Sensitivity		OFF/Auto
White Balance		ATM / AWC ● PUSH / Varnail
User Color Mode		STANDARD/COLD/WARM/WMD
Power Source		AC 24V, DC 12V	AC 230V	AC 24V, DC 12V	DC 12V
Power Consumption		4.4W	4.4W	4.4W	2.9W
Operation Temp.		-10°C to 30°C
Storage Temp.		20°C to 60°C
Operation Humidity 9% Off to 90% HFI
Storage Humidity		0%RH to 85%RH
Weight		376 g
Dimension (X.X.V.)		5×4 mm x 0.1 mm x 134 mm

Installation Guide

1
Install the camera and mounting bracket securely.

Kamora ve kamera bağlantı perçasimi sağlam bir şekilde monte edin.
Befestigen Sie die Kamera fest an der Montzgehalterung.
Zoc de camera en de montageougel stevig vast.
Bezpočne namontujte kameru a montážnu prírubu.
Extende a camera e o supante de mantagem. Fismeente.

The image is too blurry to recognize any text content.

2
Install the C or CS mount type lens.

Technical line drawing of a mechanical device with ports and wiring (no text or symbols)

C ve CS tip lens takn.
Momleren: Eilen das C. oder CS Mount Objektiv.
(NEDERLANDS) Montserven C mount of CS mount object (lans).
Namontujte objektiv's typom oojimky Calebo CS.
Instale as bêtes de reortaperto do tipo C no CS.

<###>

.СБ и С днан, 2010

3
Install the camera and mounting arm.

Technical line drawing of a mechanical device with a pipe and housing (no text or symbols)

kamera ve kamera bağlantı parçası kolunu mono odin.
Beteiligten Sie die Kamera am Montagearm.
«NEDERLANDS» Montean de camera en de montagearm.
Namortuča kameru a montážne ramano.
Invitate a camera en frugos de montagem

The image contains no legible text or symbols.

4
Connect the power and monitor.

The following table is in English:

Flange-back Adjustment

L321 series L320 series

1
Loosen the flange-back fixing lever.

«TÜRKÇE» Hanş anka sabılcıtyd kolu.govseln.
Lösen Sie die Justierschraube am Linstellhebel für das Aufzocmaß.
Maal de lange back bewertigingsdental los.
Uvalite upovňovacíu páku na zadne strane prinuby.
Afrocise a ravelador de fixação da flange noeira

The image is too blurry to recognize any text content.

תְשָׁה בְּרַעֹתִי

2
Up and down the flange-back adjusting lever to obtain a focused point

The image is too blurry to recognize any text content.

2
Use the flange-back adjusting ring to obtain a focused point.

«TÜRKÇE»