ACME PB16S - Power bank

PB16S - Power bank ACME - Free user manual and instructions

Find the device manual for free PB16S ACME in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ACME PB16S - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypePower bank
BrandAcme
ModelPB16S
Battery Capacity16000 mAh
Battery TypeLithium-ion
Input PortMicro USB
Input Rating5V/2A
Output Ports2 x USB-A
Output Rating5V/2.1A (each port)
Total Output Current4.2A max
Charging Time (approx)8 hours
Dimensions (L x W x H)6.5 x 3.1 x 1.0 in
Weight12.3 oz
LED Indicator4-level battery indicator
Pass-Through ChargingSupported
Overcharge ProtectionYes
Short Circuit ProtectionYes
Temperature ProtectionYes
MaterialPlastic (ABS)
ColorBlack
CompatibilitySmartphones, tablets, GPS, cameras
Accessories IncludedMicro USB cable, user manual
CertificationsCE, FCC, RoHS
Operating Temperature32°F - 104°F
Storage Temperature-4°F - 140°F

Frequently Asked Questions - PB16S ACME

How do I charge the power bank?
Connect the included Micro USB cable to the input port of the power bank and plug the other end into a USB power adapter (5V/2A recommended). The LED indicators will show charging status.
How can I check the remaining battery level?
Press the power button briefly. The four LED indicators will light up to show the approximate charge level: 25% per LED.
Can I charge my phone and the power bank at the same time?
Yes, the PB16S supports pass-through charging. You can charge the power bank while it is charging your devices.
What devices are compatible with this power bank?
It is compatible with most devices that charge via USB, such as smartphones, tablets, Bluetooth headphones, cameras, and portable game consoles.
How long does it take to fully charge the power bank?
With a 5V/2A adapter, it takes approximately 8 hours to charge the PB16S from empty to full.
Why is the LED blinking?
A blinking LED indicates that the power bank is in the process of charging or discharging. If all LEDs blink simultaneously, it may signal an error or over-temperature protection.
Is it safe to leave the power bank charging overnight?
Yes, the PB16S has built-in overcharge protection, which automatically stops charging when the battery is full. However, it's best to unplug once fully charged for optimal battery health.
What is the actual usable capacity?
The actual capacity for charging devices is less than 16000mAh due to energy conversion losses. Typically, you can expect about 70-80% efficiency, so roughly 11000-12800mAh usable.
How do I clean the power bank?
Use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasives. Ensure the device is unplugged and turned off before cleaning.
What is the warranty period?
Acme offers a 12-month limited warranty against manufacturing defects. Keep your purchase receipt for warranty claims.

User questions about PB16S ACME

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Power bank in PDF format for free! Find your manual PB16S - ACME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PB16S by ACME.

USER MANUAL PB16S ACME

Salida total: CC 5 V/4.2 A

The following table is provided in the image.

Simbol WEEE oznaćava da se s ovim uređajem ne smije

Technical specifications:

Battery: Li-polymer, 15 000 mAh (55.5 Wh)

Output capacity: Up to 9 800 mAh

Input: DC 5 V, 2 A (Micro USB) / T.5 A (Lightning) Output: USB type-A, DC 5 V, 2.1 A

Total output: DC 5 V / 4.2 A

Charging time: 11–20 h

Dimensions: 140 x 75 x 21 mm Weight: 333 m

Weight: 555 g Cable type: Mi

Cable type: MICRO USB Charging the news

Charging the power bank

  1. Connect the power bank to the 5 V DC power adapter by a using miss USD (Lightning cable to change it. For faster recharging use

micro USB / Lightning cable to charge it. For faster recharging, we recommend using a 5 V / 2 A power adapter and a high-perfor-

mance cable.

  1. The power bank can be charged via a computer's USB port, but it

will take longer to charge.

  1. During charging, the LED lights will be blinking. Four continuously glowing LEDs indicate that power bank is fully charged.

  2. The power bank cannot charge other devices while it is charging

  3. The power bank cannot charging other devices

Charging other devices

  1. Connect your device to the power bank with included or any other type of USB charging cable*.

*Power banks with more than one USB port can charge more than

one device at the same time.

  1. The charging process will start automatically.

  2. Disconnect the device after it is fully charged.

  3. You can share the power bank better level by

  4. You can check the power bank battery level by pressing the power shock button:

- Four glowin

- Four glowing LEDs indicate that the power bank is fully charged. - One fast-blinking or no glowing LEDs means that the battery is

empty

General information

• Fully charge the power bank before using it for the first time.

• For best charging performance for other devices, use the incl

cable or other good-quality and short-length cables.

- Charging performance may differ between devices, because their

power input specifications are different. If you do not use the power bank for a long period of time, please

- If you do not use the power bank for a long period of time, please charge it once every 3 months to avoid shortening its battery life.

- Avoid totally discharging the power bank, because it

irreversible loss of battery capacity.

• Li-Ion/Pi-Po batteries exhibit a gradual decrease in performance

over their service life, so a reduction in initial battery capacity is not an indication of a faulty battery or device.

not an indication of a faulty battery or device.

• The power bank must be stored in a dry, cool place.

Operating safety

  1. It is normal for the device to become warm when charging.

  2. Do not cover the device when in use.

  3. Keep the device away from water for

  4. Keep the device away from water, fire, humidity, direct sunlight or extremely hot environments

  5. Do not disassemble the devic

  6. Do not use a damaged power adapter or USB cable to charge the

device.

  1. If the product appears to be bulging or shows other undesirable

characteristics, stop using it

Waste Electrical and Electronic Equipment (WEEE) Symbol

The use of the WEEE symbol indicates that this product may

not be treated as household waste. By ensuring this

product is disposed of correctly, you will help protect

contact your local authority, your household waste disposal

service provider of the shop where you purchased the product.

pazîmes, pârtrauciet to lietot

The text is not clearly legible. According to the rules, (1) The following table is a section of the text:

Elektrisko un elektronisko lekartu atkritumu (WEEE) simbols

Mootmed. 1 Kaal: 333 g

Accumulator: Li-Polymer, 15 000 mAh (55.5 Wh)

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ACME

Model : PB16S

Category : Power bank