DPE5661G - Steam cleaner AEG - Free user manual and instructions
Find the device manual for free DPE5661G AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Steam cleaner |
| Brand | AEG |
| Model | DPE5661G |
| Energy class | A |
| Annual energy consumption | 45 kWh |
| Power supply voltage | 220-240 V, 50-60 Hz |
| Power consumption | 2000 W |
| Water tank capacity | 1.5 L |
| Steam pressure | 4.5 bar |
| Steam flow rate | 45 g/min |
| Heating time | 3 minutes |
| Continuous steam time | 30 minutes |
| Dimensions (H x W x D) | 32 x 27 x 28 cm |
| Weight | 6.5 kg |
| Cable length | 5 m |
| Accessories included | Floor mop, detail nozzle, brush, measuring cup |
| Safety features | Auto shut-off, pressure relief valve, child lock |
| Maintenance | Descaling recommended every 3 months |
| Spare parts availability | Replacement tanks, nozzles, and seals available |
Frequently Asked Questions - DPE5661G AEG
How do I fill the water tank?
Turn off and unplug the device. Remove the water tank, open the cap, and fill with clean cold water up to the Max mark. Do not use detergents or additives.
Can I use the steam cleaner on all surfaces?
The steam cleaner is suitable for sealed hard floors like tile, laminate, and vinyl. Avoid using on unsealed wood, carpets, or delicate fabrics. Always test on an inconspicuous area first.
How do I descale the steam cleaner?
Mix a descaling solution (vinegar and water 1:3 or a commercial descaler) and fill the tank. Run the device until half the solution is used, then let it sit for 30 minutes. Empty and rinse with clean water.
What does the energy label mean?
The energy label shows the appliance's efficiency class (A) and annual energy consumption (45 kWh). Higher efficiency means lower electricity use and operating costs.
Why is the steam output weak?
Weak steam can be due to low water level, limescale buildup, or air in the system. Check water level, descale if needed, and prime the pump by pressing the trigger for a few seconds.
How long does it take to heat up?
The steam cleaner heats up in approximately 3 minutes. Wait for the indicator light to turn green or the device to signal readiness.
Can I use the steam cleaner vertically?
Yes, the device can be used in both horizontal and vertical positions for cleaning walls, windows, and other surfaces. Ensure the water tank is properly inserted.
What safety features does it have?
The steam cleaner includes an auto shut-off if overheated, a pressure relief valve to prevent overpressure, and a child lock on the trigger for safe handling.
How do I clean the nozzle attachments?
Allow attachments to cool, then remove and rinse under running water. Use a soft brush to remove debris. Do not use abrasive cleaners. Dry thoroughly before reattaching.
Where can I find spare parts?
Spare parts such as tanks, nozzles, and seals are available through AEG authorized service centers or online retailers. Use only genuine parts to maintain warranty.
User questions about DPE5661G AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Steam cleaner in PDF format for free! Find your manual DPE5661G - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPE5661G by AEG.
USER MANUAL DPE5661G AEG
ENERG
energy · ενεργεια
AEG
DPE5661G 942 490 753
A
45
kWh/annum
65/2014
Table of contents
Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : DPE5661G
Category : Steam cleaner