MC346 - TV antenna MAGNAVOX - Free user manual and instructions

Product Type	Indoor TV Antenna
Brand	Magnavox
Model	MC346
Frequency Range VHF	40 – 230 MHz
Frequency Range UHF	470 – 860 MHz
Impedance	75 Ω
Connector Type	F-type
Antenna Type	Passive (non-amplified)
Reception Standards	Analog NTSC, Digital ATSC, HDTV
VHF Reception Method	Extendable rod antenna with 12-position fine tuning switch
UHF Reception Method	Rotate main unit with 12-position fine tuning switch
Installation	No tools required; connect coaxial cable to TV or receiver
Placement Recommendations	Near window with clear view to transmitter; avoid metal surfaces
Compatible Devices	TV, Satellite Receiver, VCR
Cable Length (approx.)	1.8 m (6 ft)
Dimensions (approx.)	25 cm × 10 cm × 5 cm (main unit with rod folded)
Weight (approx.)	0.2 kg
Color	Black
Material	Plastic and metal
Power Source	Passive – no external power required
Accessories Included	Main unit, user manual
Cleaning	Wipe with a soft, dry cloth; do not use liquids
Safety Warning	Keep away from moisture and metal surfaces to avoid interference
Repairability	Not user-serviceable; no spare parts available

Frequently Asked Questions - MC346 MAGNAVOX

Can this antenna receive digital or analog broadcasts?

Yes, this antenna is designed to receive Analog NTSC, Digital ATSC, and HDTV broadcasts in both UHF and VHF bandwidths.

Where should I place the antenna for best reception?

Place the antenna near a window with a clear view of the transmitter. Keep it away from large metal surfaces to avoid signal interference.

How do I set up the VHF reception?

Extend the VHF rod antenna to its full length. Then turn your TV to the desired channel and rotate the rod or adjust the 12-position switch until reception is clear.

How do I set up the UHF reception?

For UHF, turn your TV to the desired channel and rotate the entire main unit in different directions. Use the 12-position switch to fine-tune the signal.

What type of connector does this antenna use?

The antenna has an F-type connector for standard coaxial cable, compatible with most TVs, satellite receivers, and VCRs.

Does this antenna need power to work?

No, this is a passive antenna and requires no external power source. It relies solely on the incoming signal.

Can I use this antenna outdoors?

This antenna is designed for indoor use only. Using it outdoors may expose it to moisture and weather damage, and it is not weatherproof.

What should I do if I get no signal or poor reception?

First, ensure the antenna is near a window with minimal obstructions. Try rotating the antenna and adjusting the 12-position switch. If problems persist, move the antenna to a different location or away from electronic devices and metal objects.

Is this antenna amplified?

No, the MC346 is a non-amplified (passive) antenna. If you are in a weak signal area, consider using a separate signal amplifier.

How do I clean and maintain this antenna?

Clean the antenna with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Store in a dry place when not in use. The antenna has no user-serviceable parts.

USER MANUAL MC346 MAGNAVOX

QTY	Description Image
1	User's Manual	[K2KW]
1	Main Unit

SET UP:

Determine the signal strength:

Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter.

Notes:

• Choose a location near a window which gives the antenna a clear view of the transmitter.
• Place the antenna away from the metal surface to avoid interference.

12

Connection:

Connect the coaxial cable from the Main Unit to your Television; Satellite Receiver and/or Video Cassette Recorder as the illustrated

follows:

graph LR
    A["Satellite Receiver"] -->|To TV| B["TV1"]
    A -->|To TV| C["TV2"]
    A -->|SAT/VCR| D["Satellite Receiver/VCR"]

RECEIVING:

For VHF

- Extend the VHF rod antenna to the longest possible length as the illustrated below:

- Turn the TV to the desired channel/station. Move the VHF rod antenna in different directions until the reception is achieved (And/or turn the 12-position Switch to fine tune) as the illustrated below:

For UHF:

Turn the TV to the desired channel/station. Turn the Main Unit in different directions until the reception is achieved (And/or turn the 12-position Switch to fine tune) as the illustrated below:

3

FREQUENTLY ASKED QUESTIONS:

Q: Can this antenna receive digital or work with Analogue (NTSC) and Digital (ATSC) broadcasts?

A: Yes, this antenna is designed to receive Analogue (NTSC); Digital (ATSC) and HDTV broadcasts in the UHF & VHF bandwidths.
Q: Where should I place the antenna in order to get the best reception possible?
A: Choose a location near a window which gives the antenna a clear view of the transmitter. Place the antenna away from the metal surface to avoid interference.

GENERAL SPECIFICATIONS:

Frequency Coverage: VHF: 40 – 230 MHz UHF: 470 – 860 MHz

Impedance of antenna: 75 Ω

Type of antenna: F type

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE

4