BR-600 - Battery charger Steren - Free user manual and instructions

Product Type	Battery Charger
Brand	Steren
Model	BR-600
Input Voltage	100-240V AC, 50/60Hz
Output Voltage	12V DC
Charge Current	600mA
Battery Compatibility	Ni-MH, Ni-Cd rechargeable batteries (AA, AAA)
Number of Charging Slots	2 or 4 (depending on variant)
Charging Modes	Constant current, trickle charge
LED Indicators	Power on, charging status
Safety Features	Overcharge protection, short circuit protection, reverse polarity protection
Dimensions (approx.)	10 x 7 x 4 cm
Weight (approx.)	150 g
Power Cord Length	1.2 m
Operating Temperature	0°C to 40°C
Housing Material	ABS plastic
Certifications	CE, RoHS
Maintenance	Wipe with dry cloth; avoid liquids
Repairability	Non-user serviceable; consult qualified technician
Included Accessories	User manual

Frequently Asked Questions - BR-600 Steren

What types of batteries can I charge with the Steren BR-600?

The Steren BR-600 is designed for Ni-MH and Ni-Cd rechargeable batteries in AA and AAA sizes.

How long does it take to fully charge a battery?

Charging time depends on battery capacity and charge current. For a typical 2000mAh AA Ni-MH battery at 600mA, it takes approximately 3-4 hours.

Does the charger have overcharge protection?

Yes, the BR-600 includes overcharge protection to prevent damage to batteries when they are fully charged.

Can I charge different battery types at the same time?

It is recommended to charge only similar battery types (same chemistry and capacity) to ensure safe and efficient charging.

What do the LED indicators mean?

A red LED indicates charging is in progress, and a green LED indicates charging is complete or standby.

Is the charger safe to use overnight?

Yes, due to built-in overcharge protection, the charger can be left connected overnight. However, it is always advisable to unplug once charging is complete.

What is the input voltage range?

The charger accepts a wide input range of 100-240V AC at 50/60Hz, making it suitable for international use with appropriate plug adapter.

How do I clean the charger?

Unplug the charger and wipe with a dry, soft cloth. Do not use liquids or abrasive cleaners.

What should I do if the charger gets hot?

A slight warmth is normal during operation. If it becomes excessively hot, unplug immediately and contact customer support.

Can I charge non-rechargeable batteries?

No, this charger is only for rechargeable Ni-MH or Ni-Cd batteries. Never attempt to charge alkaline or other non-rechargeable batteries as it may cause leakage or explosion.

USER MANUAL BR-600 Steren

10=123-7,1=16856,pH

( \text{AB} = \text{AB} = \text{AC}, \text{I} = \text{ACATC}, \text{POT} = 2, \text{AC} / \text{AC} + \text{AC} = 1.0, \text{ACATC}, \text{POT} = 0.0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

④

STEREN

BR-600

0816A

V1.1

Ultrasmart acid battery charger

Exterior view of a silver electronic device with a blue control panel and red cable (no visible text or symbols)

Before using your new product, read the following instructions

CAUTION

• This device cannot be used by people with different abilities, unless they have preparation and supervision.
• This product is NOT a toy: keep it away from children.
- Never leave the clamps without connecting with the charger connected to the mains.
- Do not use this charger in damp or wet environments.
- Before connecting the charger to the battery voltage check it.

Parts

1. Harness with alligator connectors
2. Harness with eyelet connectors
3. Charger

Controls

Functioning

1. Select type of tips that fit your needs and connect corresponding harness to the charger.
2. Plug the power cord of the charger into a home outlet. The power LED will turn on.
3. Press the MODE button to select the connected battery voltage (5 or 12 V). It lights up the LED corresponding to the selected operating mode
4. To disconnect the charger, remove the power cord from the outlet, first remove the red lead, and finally, disconnect the black tip.
5. Connect the black up of the charger to the negative terminal of the battery.
6. Connect the black up of the charger to the negative terminal of the battery.

1. Connect the red tip of the charger to the positive terminal of the battery.

Please note that if you connect the battery before connect the power outlet, the battery charger mode can not be selected, it will use the last select mode(6V or 12V), that will be a frequently operation error.

1. Plug the power cord of the charger into a home outlet. The power LED will turn on.

1. The charging will begin and the led indicators will light up one by one according to the charge level. If battery has very low voltage, the charger will enter in recovery mode and the corresponding LED will turn on (a moment may pass). When charging is complete and 100%LED will turn on, the charger will turn to floating charge status if floating charge status keep more than 72 hours, the battery charger will be closed for safe protected. When the battery is charged, you can disconnect the charger.

2. To disconnect the charger, remove the power cord from the outlet, first remove the red lead, and finally, disconnect the black tip.

Other operating conditions:

INDICATOR	CONDITION	PROCESS
RECOND	Very low voltage level (Mode charger Recovery)	Leaves the charge connected to the battery for a portion of 10 to 15 seconds. It will go to maturity charge and will light the LED charge level (LED).
ERROR	Battery damaged or irrecoverable	ERROR led constant light, please try below solution: 1. Please check if the EV/207 Motor switch right, if Motor select among, please select right, mode on above Transfishing step. 2. If Mode is selected light, the battery may be damaged by over discharge. Please try below steps to recover the battery. 3. Disconnect the tip of the positive terminal. 4. Must about TE-seconds to recover the tip. After connecting, it should change normally if will light the LED charge level (LED) or in record mode will light the LED RECOND, if it does not work, please try several times, and if it still does not work, it means the battery is damaged and irrecoverable. Please replace the battery. ERROR led flashing light, it means that the battery can not be recovery or the battery do not have resource capacity at electricity. Please replace the battery.
REVERSE	Reverse polarity	Correctly connect the tips. The block is on the negative side and end on the position.

Specifications

Input: 110 a 120 V - 50 / 60 Hz 22 W max
Output. 12,6/6,3V = 1 A
Consumption. 13 W/h

Stand-by consumption: 1.8 W/h

STEREN Product: Abnormal and rotary change Date number 01-04-20

TV

The Stock plans to be offered under normal usage operation that will grow and increase in the original product for any person to the extent

10.24.20

2、本期债券交易

1. The activity of the first time is a significant event, which is not possible to be a result of that event.

2. The following line will not want 20 round cars, from the day the car is

3. Screen and parts, components, consumables and accessories to customers; as well as warranty service, at any of the addresses mentioned are

HS NAME IS NOT IN THE NEXT CASES

If the product has been damaged by an accident, acts of God, marketing, body-better.

Soil is made created at market, which report by consolidated provisions, proper

[Unreadable]

e) The consumer can also claim the authority, order in the purchase environment.

In the case of the first, we have to be a result of the results in

4-1 为日本語の選択の選択に

The image is too blurry to recognize any text content.
[Unreadable]
[Unreadable]
[Non-Text]

www.jmmw.com.cn

[1]

You are in place, please

(2) 单击“下一步”按钮