Sharper Image One Touch Can Opener - Can opener

One Touch Can Opener - Can opener Sharper Image - Free user manual and instructions

Find the device manual for free One Touch Can Opener Sharper Image in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Sharper Image One Touch Can Opener - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type One Touch Can Opener
Brand Sharper Image
Model One Touch Can Opener
Material Plastic and stainless steel cutting blade
Power Source Battery operated (4 x AA batteries, not included) or AC adapter (not included)
Battery Requirement 4 x AA alkaline batteries
Operation One touch automatic operation
Cutting Mechanism Rotary blade cuts around lid smoothly
Can Compatibility Standard and most pull-tab cans
Safety Features Automatic stop when lid is cut; blade covers
Cleaning Instructions Wipe with damp cloth; hand wash removable parts
Dimensions (approx.) 10 x 4 x 4 inches (25.4 x 10.2 x 10.2 cm)
Weight (approx.) 1 lb (0.45 kg)
Color White and grey
Warranty 1 year limited warranty

Frequently Asked Questions - One Touch Can Opener Sharper Image

How do I open a can?
Place the can opener on top of the can, ensuring the cutting wheel aligns with the lid edge. Press the one-touch button and the opener will automatically rotate around the can, cutting the lid. Once complete, it stops automatically.
What type of batteries does it use?
It requires 4 AA batteries (not included). For best performance, use alkaline batteries.
Can I use an AC adapter?
Yes, a compatible AC adapter can be used, but it is not included. Check the specifications for voltage and plug type.
How do I clean the can opener?
Wipe the exterior with a damp cloth. The cutting blade and lid holder can be rinsed under water. Dry thoroughly before storing. Do not submerge the main body in water.
Will it work on all can sizes?
It works on standard sized cans and most pull-tab cans. Very large or unusually shaped cans may not fit properly.
What if the can opener stops working?
Check the batteries first. If batteries are new and it still doesn't work, inspect the cutting blade for debris or damage. Refer to the manual or contact customer support.
Is it safe to use?
Yes, the opener is designed with safety features including automatic shut-off after cutting and covered blades to prevent accidental contact. Always supervise children near the appliance.
Can I open cans without a pull-tab?
Yes, it can open standard cans without pull-tabs. The rotary blade cuts the lid around the rim.
Does it leave sharp edges on the lid?
The cut lid may have slightly sharp edges. Handle with care and dispose of the lid properly.
Where can I find replacement parts?
Contact Sharper Image customer service or visit their official website for replacement cutting blades or other parts.

User questions about One Touch Can Opener Sharper Image

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Can opener in PDF format for free! Find your manual One Touch Can Opener - Sharper Image and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. One Touch Can Opener by Sharper Image.

USER MANUAL One Touch Can Opener Sharper Image

natural_image Close-up of a white electronic device with a circular button and handle, mounted on a stand (no visible text or symbols)

Thank you for purchasing the Sharper Image One Touch Can Opener. Please take a moment to read this guide and store it for future reference.

INTRODUCTION

The Sharper Image One Touch Can Opener is the automatic can opener that opens metal cans with the touch of a button. When the can is opened, a built-in magnet prevents it from dropping into your food.

FEATURES

  • Opens cans of all shapes and sizes
  • Easy one-button operation
    • Built-in magnet holds the detached lid
  • Cordless and battery operated
  • Requires 2 AA batteries [alkaline or rechargeable]

IDENTIFICATION OF PARTS

Battery Door Button Front Cap Cutter Drive Wheel Magnet

GETTING STARTED

Fig.1 Slide back the bottom cover

  • Slide off the battery door and install 2 AA batteries (alkaline or rechargeable). [FIG. 1]
  • Replace the battery door.

NOTE: Always replace both batteries at once. Do not mix different type of batteries.

CAUTION!

The cutter may resume operation when new batteries are inserted. ALWAYS KEEP FINGERS AWAY FROM THE CUTTER.

OPERATION

  1. Place your One Touch Can Opener on top of the can, with the rim positioned in the groove between the cutter and the drive wheel. [FIG. 2]

Fig.2 Can rim in groove

NOTE: If the can has a pull tab, flip it over and open the end that does not have a pull tab.

  1. With the can on a flat surface, press the button for about 1 second and release. The can opener will start cutting the can. [FIG. 3]

Fig.3 Press and hold Start Button to start

  1. When the cutting is complete, press the Button immediately to stop the cutter. [FIG. 4]

Fig.4 Auto cutting, press to stop

  1. Wait a few seconds for the cutter to reset to the starting position and the motor to stop. Then, lift the can opener off the can. The magnet on the can opener will hold the detached lid for safety. [FIG. 5]

Fig.5 Lift can opener with lid CNC 7a1

PLEASE NOTE: The can lid may have a sharp edges. Please dispose of it carefully.

CARE AND MAINTENANCE

  • If the One Touch Can Opener slows down, it may be a sign to change the batteries.
  • To clean the One Touch Can Opener, remove the batteries and then remove the front cap.
  • Wipe the cutter with a damp cloth or sponge, using a mild, non-abrasive cleaner.
  • Dry it with a clean, dry cloth.

TROUBLESHOOTING

  • If the One Touch Can Opener is jammed, press the button a second time to activate the reverse function. The device will reset to the starting position.
  • If you encounter a deformity or bump on the can, reposition the can and start the cutting just beyond the bump.
  • If the device stops working while opening a can, there is a strong possibility that the batteries are dead. Remove the battery door and insert 2 new AA batteries [alkaline or rechargeable]. Be sure to replace the battery door. REMEMBER, ALWAYS KEEP FINGERS AWAY FROM THE CUTTER.

NOTE: The One Touch Can Opener will not open rimless cans or cans with odd corners.

SAFETY INSTRUCTIONS

  • Read all instructions carefully before using this device.
  • This device is not a toy. Keep it out of reach of children at all times.
    · DO NOT use this device to open pressurized (aerosol) cans.
    · DO NOT use this device to open flammable liquids such as lighter fluid.
    · DO NOT leave this device unattended.
  • DO NOT press the Button while the front cap is removed.
  • Press the Button to stop the device after cutting is completed.
    · DO NOT press the button while you are changing the batteries.
  • Before cleaning the device, be sure to remove the batteries to prevent accidental activation.
  • Avoid contact with the cutter. To avoid injury, keep hands, hair, jewelry and clothing away from the cutter during operation.
    · DO NOT immerse this device in water.
    · DO NOT place this device in the dishwasher.

WARRANTY / CUSTOMER SERVICE

Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. If you have any questions not covered in this guide, please call our Customer Service department at 1 (877) 210-3449. Customer Service agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.

SHARPER IMAGE

The SHARPER IMAGE ^® name and logo are registered trademarks.

@Sharper Image. All Rights Reserved.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Sharper Image

Model : One Touch Can Opener

Category : Can opener