ELA-100 - Parafoudre réseau Ethernet Planet - Free user manual and instructions
Find the device manual for free ELA-100 Planet in PDF.
| Product Type | Ethernet Lightning Arrest Box |
| Model | ELA-100 |
| Brand | Planet |
| Ethernet Interface | 2 passive 10/100/1000 Ethernet Ports (RJ-45) |
| Ground | 1 ground position (screw terminal) |
| DC Spark-Over Voltage | 230 V, ±20% |
| Nominal Impulse Discharge Current (8/20 μs) | 20 kA |
| Arc Voltage at 1 A | ~35 V |
| Glow to Arc Transition Current | ~1 A |
| Glow Voltage | ~200 V |
| Dimensions (W x D x H) | 65 x 42 x 20 mm |
| Weight | 80 g |
| Operating/Storage Temperature | -40 to 70 °C |
| Operating/Storage Humidity | 5% to 90% RH |
| Package Contents | Ethernet Lightning Arrest Box x1, Quick Installation Guide x1, Ground cable x1 |
| Installation Location | Outdoor with shelter (must be earthed) |
| Safety Note | Device must be properly grounded; otherwise electric shock and damage may occur. |
| Certification | CE |
Frequently Asked Questions - ELA-100 Planet
User questions about ELA-100 Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Parafoudre réseau Ethernet in PDF format for free! Find your manual ELA-100 - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ELA-100 by Planet.
USER MANUAL ELA-100 Planet
Thank you for purchasing PLANET Ethernet Lightning Arrest Box ELA-100, the Ethernet Lightning Arrest Box package shall contain following contents:
Check the contents of your package for following parts:
☐ Ethernet Lightning Arrest Box x1
□ Quick Installation Guide x1
□ Ground cable x1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
Please refer to following procedure and picture to install the Ethernet Lightning Arrest Box between two Ethernet devices.
Step 1:
In the right side, please use ground cable from package to connect the screw and ground.
Step 2:
Please connect first Ethernet device to the protected port that near the screw through the UTP cable.
Step 3:
Please connect second Ethernet device to un-protected port from other side of Ethernet Lightning Arrest Box.

flowchart
graph TD
A["Ethernet Equipments"] -->|RJ-45| B["ELA-100"]
B --> C["Withstand current 20KA"]
D["Ethernet Equipments"] -->|RJ-45| B
style A fill:#f9f,stroke:#333
style B fill:#ccf,stroke:#333
style D fill:#cfc,stroke:#333
Figure 1: ELA-100 Application
□Notice:
- Please install this device at outdoor with shelter.
- This Ethernet Lightning Arrest Box must be earthed. If not, this device may with electric shock and cause damage.
Specification
| Model | ELA-100 |
| Ethernet Interface | 2 passive 10/100/1000 Ethernet Ports |
| Ground | 1 ground position |
| DC spark-over voltage | 230V, ±20% |
| Nominal impulse discharge current ( wave 8/20μs) | 20KA |
| Arc Voltage at 1A | ~35V |
| Glow to arc transition current | ~1A |
| Glow voltage | ~200V |
| Dimension (W x D xH) | 65 x 42 x 20mm |
| Weight | 80g |
| Operate/Storage environment | -40~70 Degree C, 5%~90%RH |
Table 1: Specification of ELA-100
2010-AH0050-000
CE