Titan 9 - Tiller Plant Craft - Free user manual and instructions

Product Type	Rototiller
Brand	Plant Craft
Model	Titan 9
Engine Type	4-stroke gasoline engine
Engine Displacement	208 cc
Power Output	6.5 HP
Tilling Width	20 inches
Tilling Depth	Up to 8 inches
Tine Count	8 heavy-duty tines
Transmission	Forward and reverse gears
Starting System	Recoil start
Wheel Type	Pneumatic transport wheels
Weight	85 lbs (approx.)
Fuel Tank Capacity	1.5 quarts
Oil Capacity	0.63 quarts
Handle Type	Adjustable ergonomic handles
Manual Languages	English
Manual Pages	36

Frequently Asked Questions - Titan 9 Plant Craft

What type of oil should I use in the Titan 9 rototiller?

Use a high-quality SAE 30 or 10W-30 motor oil. Refer to the engine manual for exact viscosity recommendations.

How do I start the Titan 9 rototiller?

Ensure fuel and oil levels are correct. Set the throttle to the choke position, pull the recoil starter handle firmly, then adjust the throttle to run once started.

What is the recommended tilling depth?

The Titan 9 can till up to 8 inches deep. Adjust the depth stake to control the tilling depth.

How wide is the tilling path?

The tilling width is 20 inches, making it suitable for medium-sized gardens.

Can I use the Titan 9 on rocky soil?

Avoid rocky soil as it can damage the tines. Clear the area of rocks and debris before tilling.

How often should I change the oil?

Change the engine oil after the first 5 hours of use, then every 25 hours or seasonally.

What maintenance does the Titan 9 require?

Regularly check oil level, clean or replace the air filter, sharpen tines, and store in a dry place. Refer to the maintenance schedule in the manual.

Is the Titan 9 easy to maneuver?

Yes, it features pneumatic transport wheels and adjustable handles for comfortable maneuvering even in tight spaces.

What safety precautions should I take?

Always wear safety goggles and sturdy shoes. Keep hands and feet away from tines. Disconnect spark plug before maintenance. Read the safety section in the manual.

Where can I find spare parts?

Contact Plant Craft customer service or authorized dealers. Common spare parts include tines, belts, and air filters. Check the parts list in the manual.

USER MANUAL Titan 9 Plant Craft

User Manual

[Revision 1.0 July 2022]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance, assembly, inclusions, specifications, description, and packaging.

The product is NOT supplied with engine oil, although traces of oil from the manufacturing process may be present. It is essential to add adequate engine oil of the correct type to the engine before use. Failure to add engine oil will void the product warranty.

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or SERIOUSLY INJURED if you do not follow instructions.

It is vital that you read and understand this user manual before using the product, including safety warnings, and any assembly and operating instructions. Keep the manual for future reference.

Safety precautions and recommendations detailed here must be fully understood and followed to reduce the risk of injury, fire, explosion, electrical hazard, and/or property damage.

Safety information presented here is generic in nature – some advice may not be applicable to every product. The term "equipment" refers to the product, be it electrical mains powered, battery powered or combustion engine powered.

• Before Use - If you are not familiar with the safe operation/handling of the equipment or are in any way unsure of any aspect of suitability or correct use for your application, you should complete training conducted by a person or organization qualified in safe use and operation of this equipment, including fuel/electrical handling and safety.
• Do NOT operate the equipment in flammable or explosive environments, such as in the presence of flammable liquids, gases, or dust. The equipment may create sparks or heat that may ignite flammable substances.
• Keep clear of moving parts.
• Equipment may be a potential source of electric shock or injury if misused.
• Do NOT operate the equipment if it is damaged, malfunctioning or is in an excessively worn state.
• Do NOT allow others to use the equipment unless they have read this manual and are adequately trained.
• Keep packaging away from children - risk of suffocation! Operators must use the equipment correctly. When using the equipment, consider conditions and pay due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.
• Do not operate the equipment if bystanders, animals etc are within operating range of the equipment or the general work area.
• If devices are provided for connecting dust extraction / collection facilities, ensure these are connected and used properly. Dust collection can reduce dust-related hazards.

You CAN be KILLED or SERIOUSLY INJURED if you do not follow instructions.

General Personal Safety

• Wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect from eye and ear injury, poisoning, burns, cutting and crush injuries. Protective equipment such as safety goggles, respirators, non-slip safety footwear, hard hat, hearing protection etc should be used for appropriate equipment / conditions. Other people nearby should also wear appropriate personal protective equipment. Do not wear loose clothing or jewellery, which can be caught in moving parts. Keep hair and clothing away from the equipment.
• Stay alert and use common sense when operating the equipment. Do not overreach. Always maintain secure footing and balance.
• Do not use the equipment if tired or under the influence of drugs, alcohol, or medication.
• This equipment is not intended for use by persons with reduced physical, sensory, or mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable – keep clear of naked flames or other ignition sources.
• Do not spill fuel. If you spill fuel, wipe it off the equipment immediately – if fuel gets on your clothing, change clothing.
• Do NOT smoke near fuel or when refuelling.
  • Always shut off the engine before refuelling.
• Do NOT refuel a hot engine.
• Open the fuel cap carefully to allow any pressure build-up in the tank to release slowly.
  • Always refuel in well ventilated areas.
• Always check for fuel leakage. If fuel leakage is found, do not start, or run the engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN KILL IN MINUTES. Engine exhaust contains carbon-monoxide – a poison you cannot smell or see.
• Use combustion engines OUTSIDE only, and far away from windows, doors, and vents.

You CAN be INJURED if you do not follow instructions or equipment damage may occur.

General Equipment Use and Care

• The equipment is designed for domestic use only.
• Handle the equipment safely and carefully.
• Before use, inspect the equipment for misalignment or binding of moving parts, loose components, damage, or any other condition that may affect its operation. If damaged, have the equipment repaired by an authorised service centre or technician before use.
• Prevent unintentional starting of the equipment - ensure equipment and power switches are in the OFF position before connecting or moving equipment. Do not carry equipment with hands or fingers touching any controls. Remove any tools or other items that are not a part of the equipment from it before starting or switching on.
• Do not force the equipment. Use the correct equipment for your application. Equipment will perform better and be safer when used within its design and usage parameters.
• Use the equipment and accessories etc. in accordance with these instructions, considering working conditions and the work to be performed. Using the equipment for operations different from those intended could result in hazardous situations.
• Always keep equipment components (engines, hoses, handles, controls, frames, housings, guards etc) and accessories (cutting tools, nozzles, bits etc) properly maintained. Keep the equipment clean and, where applicable, properly lubricated.
• Store the equipment out of reach of children or untrained persons. To avoid burns or fire hazards, let the equipment cool completely before transporting or storing. Never place or store the equipment near flammable materials, combustible gases, or liquids etc.
• The equipment is not weather-proof, and should not be stored in direct sunlight, at high ambient temperatures or locations that are damp or humid.
• Do not clean equipment with solvents, flammable liquids, or harsh abrasives.
• For specific equipment safety use and care, see Equipment Safety.

General Electrical Safety

• Inspect electrical equipment, extension cords, power bars, and electrical fittings for damage or wear before each use. Repair or replace damaged equipment immediately.
• Ensure all power sources conform to equipment voltage requirements and are disconnected before connecting or disconnecting equipment.
• When wiring electrically powered equipment, follow all electrical and safety codes.
• Wherever possible, use a residual current device (RCD).
• High voltage / high current power lines may be present. Use extreme caution to avoid contact or interference with power lines. Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have an approved cord and plug and be connected to a grounded electrical outlet.
• Do NOT bypass the ON/OFF switch and operate equipment by connecting and disconnecting the electrical cord.
• Do NOT use equipment that has exposed wiring, damaged switches, covers or guards.
• Do NOT use electrical equipment in wet conditions or in damp locations.
• Do NOT use electrical cords to lift, move or carry equipment.
• Do NOT coil or knot electrical cords, and ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or repaired at authorised service centres by qualified personnel only.
• Replacement parts must be original equipment manufacturer (OEM) to ensure equipment safety is maintained.
• Do NOT attempt any maintenance or repair work not described in this manual.
• After use, the equipment and components may still be hot – allow the equipment to cool and disconnect spark plugs and/or electrical power sources and/or batteries from it before adjusting, changing accessories, or performing repair or maintenance.
• Do NOT adjust while the equipment is running.
• Perform service-related activities in suitable conditions, such as a workshop.
• Replace worn, damaged or missing warning/safety labels immediately.

Intended Use

• This engine gasoline powered cultivator is intended for loosening and working up the soil in a garden and for tilling coarse soil for mixing in fertilizer, peat, and compost in domestic areas. This product may not be used to till extremely dry or wet soil.
• This product is intended for private domestic use only, not for any commercial trade use. It must not be used for any purposes other than those described.

General Safety Rules

• Read, understand, and follow all instructions on the machine and in the manual(s). Be thoroughly familiar with the controls and the proper use of the machine before starting.
• Use this equipment for its intended purpose only.
• Familiarize yourself with all the safety and operating decals on this equipment and on any of its attachments or accessories.
• Do not put hands or feet near or under rotating parts.
• Only allow responsible individuals who are familiar with the instructions to operate the machine. Do not allow children to operate this machine. Do not allow adults to operate the machine without proper instruction.
• Thoroughly inspect the area where the machine is to be used and remove all foreign objects. Your equipment can propel small objects at high-speed causing injury or property damage. Stay away from breakable objects, such as house windows, automobiles, greenhouses, etc.
• Wear appropriate clothing such as a long-sleeved shirt or jacket. Also wear long trousers or slacks. Do not wear shorts. Never wear sandals, sneakers, or open shoes, and never operate the machine with bare feet.
• Do not wear loose clothing or jewellery. They can get caught in moving parts. Always keep hands, feet, hair, and loose clothing away from any moving parts on engine and machine.
• Always wear safety goggles or safety glasses with side shields when operating the machine to protect your eyes from foreign objects which can be thrown from the unit. Always wear a protective hearing device.
• Always wear work gloves and sturdy footwear. Wear footwear that will improve footing on slippery surfaces. Leather work shoes or short boots work well for most people. These will protect the operator's ankles and shins from small sticks, splinters, and other debris.
• It is advisable to wear protective headgear to prevent the possibility of being struck by small flying particles, or being struck by low hanging branches, twigs, or other objects which may be unnoticed by the operator.
• Do not operate the machine without proper guards or other safety protective devices in place.
  • See manufacturer's instructions for proper operation and installation of accessories. Only use accessories approved by the manufacturer.
• Operate only in daylight or good artificial light.
• Do not operate product when fatigued or under the influence of alcohol, drugs or other medication which can cause drowsiness or affect your ability to operate this machine safely.
• Never operate machine in wet grass. Always be sure of your footing; keep a firm hold on the handle and walk; never run.
• Watch for traffic when operating cultivator near, or when crossing roads.
• If the equipment should start to vibrate abnormally, stop the engine (motor) and press, and hold the ON/OFF switch in the off position till the engine stops. The switch will return to the on position automatically.
• Check immediately for cause. Vibration is generally a warning of trouble. If the noise or vibrations of the machine increase, stop immediately and perform an inspection.
• Never leave the machine unattended when the engine is running. Press and hold the ON/OFF switch in the off position till the engine stops. The switch will return to the on position automatically. The OFF switch will come back to the ON position automatically.
• Regularly inspect the machine. Make sure parts are not bent, damaged or loose.

• Temperature of muffler and nearby areas may exceed 150°F (65°C). Allow muffler and engine areas to cool before touching. Never pick up or carry the machine while the engine is running.

• Prolonged exposure to noise and vibration from gasoline engine-powered equipment should be avoided. Take intermittent breaks and/or wear ear protection from engine noise as well as heavy work gloves to reduce vibration in the hands.

• Keep all screws, nuts, and bolts tight.
• Do not transport the machine from one place to another with the engine running.
• When moving the packaged machine, always do so with a partner.
• Check local regulations for age restrictions on use of this machine.

Product-Specific Safety Rules

• Do not cultivate above underground utilities, including water lines, gas lines, electric cables, or pipes. Do not operate the machine on terrain/soil with large rocks and foreign objects which can damage the equipment.
• After striking a foreign object, stop the engine. Press and hold the ON/OFF switch in the off position till the engine stops. The switch will return to the on position automatically. Inspect the machine for damage. If damaged, repair before starting and operating the machine.
• The tines of the cultivator should not rotate when the engine is idling. If it does rotate when engine is idling, contact the manufacturer.
• If an object becomes lodged in the tines, press, and hold the ON/ OFF switch in the off position till the engine stops. The switch will return to the on position automatically. Allow to cool before attempting to remove the foreign object.
• The clutch will transfer maximum power after about two hours of normal operation. During this break-in period clutch slippage may occur. The clutch should be kept free of oil or other moisture for efficient operation.

Engine Safety Precautions

If your product comes with a separate engine manual, be sure to read and follow all safety and warning precautions outlined there, in addition to any in this manual.

Preventing Carbon Monoxide Poisoning

• Always start and run engine outdoors. Do not start or run engine in an enclosed area, even if doors or windows are open.
• Never try to ventilate engine exhaust indoors. Carbon monoxide can reach dangerous levels very quickly.
• Never run engine outdoors where exhaust fumes may be pulled into a building.
• Never run engine outdoors in a poorly ventilated area where the exhaust fumes may be trapped and not easily taken away. (Examples include in a large hole or areas where hills surround your working area.)
• Never run engine in an enclosed or partially enclosed area. (Examples include buildings that are enclosed on one or more sides, under tents, car ports or basements.)
  • Always run the engine with the exhaust and muffler pointed in the direction away from the operator.
• Never point the exhaust muffler towards anyone. People should always be many feet away from the operation of the engine and its attachments.
• Do not change the engine governor settings or over-speed the engine.

Gasoline Fires and Handling Fuel Safely

• Use extra care in handling gasoline and other fuels. They are flammable and vapours are explosive.
• When storing extra fuel be sure that it is in an appropriate container and away from any fire hazards.
• Prevent fire and explosion caused by static electric discharge. Use only nonmetal, portable fuel containers approved by the Underwriter's Laboratory (U.L.) or the American Society for Testing & Materials (ASTM).
• Always fill fuel tank outside in a well-ventilated area. Never fill your fuel tank with fuel indoors. (Examples include basement, garage, barn, shed, house, porch, etc.) Never fill tank near appliances with pilot lights, heaters, or other ignition sources. If the fuel must be drained, this should be done outdoors. The drained fuel should be stored in a container specifically designed for fuel storage or it should be disposed of carefully.
• Never remove the fuel cap or add fuel with the engine running. Stop engine and allow to cool before filling.
• Never drain fuel from engine in an enclosed area.
  • Always wipe up excess (spilled) fuel from engine before starting.
• Clean up spilled fuel immediately. If fuel is spilled, do not start the engine but move product and fuel container from area. Clean up spilled fuel and allow to evaporate and dry after wiping and before starting.
• Allow fuel fumes/vapours to escape from the area before starting engine.
• Test the fuel cap for proper installation before starting and using engine.
  • Always run the engine with fuel cap properly installed on the engine.
• Never smoke while refilling engine fuel tank.
• Do not store engine with fuel in fuel tank indoors. Fuel and fuel vapours are highly explosive.
• Never siphon fuel by mouth to drain fuel tank.
  • Always have an adult fill the fuel tank and never allow children to fill the fuel tank.
• Never allow an adult or anyone under the influence of drugs or alcohol to fill the fuel tank.
• When storing gasoline or equipment with fuel in the tank, store away from furnaces, stoves, water heaters or other appliances that have a pilot light or other ignition source because they can ignite gasoline vapours.

WARNING: ENGINES GIVE OFF CARBON MONOXIDE, AN ODORLESS, COLORLESS, POISONOUS GAS. CARBON MONOXIDE MAY BE PRESENT EVEN IF YOU DO NOT SMELL OR SEE ANY ENGINE EXHAUST. BREATHING CARBON MONOXIDE CAN CAUSE NAUSEA, FAINTING OR DEATH, IN ADDITION TO DROWSINESS, DIZZINESS AND CONFUSION. IF YOU EXPERIENCE ANY OF THESE SYMPTOMS, SEEK FRESH AIR AND MEDICAL ATTENTION IMMEDIATELY.

Burns and Fires

The muffler, muffler guard and other parts of the engine become extremely hot during the operation of the engine. These parts remain extremely hot after the engine has stopped.

Prevention Of Burns and Fires

• Never remove the muffler guard from the engine.
• Never touch the muffler guard because it is extremely hot and will cause severe burns.
• Never touch parts of the engine that become hot after operation.
  • Always keep materials and debris away from muffler guard and other hot parts of the engine to avoid fires.

Children and Bystanders

• Tragic accidents can occur if the operator is not alert to the presence of children and/or bystanders. Never assume that others will remain where you last saw them.
• Keep the area of operation clear of all persons, especially small children, and pets. Keep children under the watchful care of a responsible adult.
• Be alert and turn machine off if children enter the area.
• Before and while moving backwards, look behind and down for small children.
• Never allow children to operate the machine.
• Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

WARNING: HOT GASES ARE A NORMAL BY-PRODUCT OF A FUNCTIONING INTERNAL COMBUSTION ENGINE. FOLLOW ALL SAFETY INSTRUCTIONS TO PREVENT BURNS AND FIRES.

Service

• Always stop the engine whenever you leave the equipment, before cleaning, repairing, or inspecting the unit. Engine should be turned off and cool. Never make adjustments or repairs with the engine (motor) running.
  • Always wear eye protection when you make adjustments or repairs.
• Keep all nuts and bolts tight and keep equipment in good condition.
• Never tamper with safety devices. Check their proper operation regularly.
• When servicing or repairing the machine, do not tip the machine over or up unless specifically instructed to do so in this manual. Service and repair procedures can be done with the machine in an upright position. Some procedures will be easier if the machine is lifted on a raised platform or working surface.
• To reduce fire hazard, keep machine free of grass, leaves or other debris build-up. Clean up oil or fuel spillage. Allow machine to cool before storing.
• Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.
• Clean and replace safety and instruction decals as necessary.
• Inspect machine before storage. When not in use, press and hold the ON/OFF switch in the off position till the engine stops. The switch will return to the on position automatically. And store indoors in a dry place locked or otherwise inaccessible to children.
• Use only original equipment parts for the manufacturer including all nuts and bolts.
  • SAVE THESE INSTRUCTIONS

DANGER

Running combustion engines in confined areas CAN KILL IN MINUTES. Engine exhaust fumes contain carbon-monoxide – a deadly gas that you cannot smell or see.

NEVER run a combustion engine in confined areas EVEN IF windows and doors are open. ONLY run petrol engines OUTDOORS and away from doors, windows, and vents.

Do not operate the equipment in hazardous locations, such as where there may be a risk of fire or explosions from flammable liquids, gases, or dust.

Do not operate the equipment in confined areas where exhaust gases, smoke or fumes could reach dangerous concentrations.

Do not refuel a combustion engine while it is running on or hot.

Never smoke while refuelling combustion engines or handling flammable substances.

For generators, the electrical output is potentially lethal and must only be connected to a fixed electrical installation by an appropriately licensed person.

Be aware that the equipment may include hazardous components, such as blades, hot surfaces and moving parts.

Handle any flammable substance with extreme caution.

• Be aware that the equipment may include hazardous components, such as blades, hot surfaces and moving parts.
• Moving blades can cause serious injury and even death if used improperly or without sufficient PPE.
• Do not use this equipment on uneven surfaces and always maintain good balance when using this equipment. Failure to do so may cause serious injury.
• Maintain a secure grip of the trigger assembly at all times.

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material HazardFlammable liquids, gases, or substances etc may present.Avoid ignition sources and open flames. Danger of fire.	Read User ManualRead and fully understand product safety warnings, operation, procedures etc before using the product.	Use Hand ProtectionWear appropriate hand protection and take due care as the product or use of the product may present hand hazards.	Exhausted VolumesCarbon-Monoxide HazardDo not use the product in confined areas or without adequate ventilation. Carbon-monoxide poisoning can be fatal.
Electrocution / Electrical Shock HazardHigh voltage or high current electricity may be present or required by the product. Take due care when handling electrical products, cables, plugs and leads. Electrical shock can be fatal.	Toxic Fumes / Dust HazardUsing the product or by-products from use may produce fumes, smoke or particles that could be harmful if inhaled. Wear appropriate breathing protection and have adequate ventilation.	Explosive Material HazardCombustible liquids, gases, or substances etc may be present.Avoid ignition sources and open flames. Danger of explosion.	Cutting / Amputation HazardThe product may have blades, edges or mechanical devices that can cause severe cut injury to fingers, limbs etc. Take due care when handling and using the product.
Crush HazardThe product may have blades, edges or mechanical devices that can cause severe crush injury to fingers, limbs etc. Take due care when handling and using the product.	Single Operator OnlyThe product must be operated by a single person only. More than one person operating the product may introduce additional hazards.	Use Face ProtectionWear appropriate full-face protection and take due care as the product or use of the product may present face and eye hazards.	Use Foot ProtectionWear appropriate foot protection and take due care as the product or use of the product may present foot hazards.
Use Eye / Ear / Head ProtectionWear appropriate eye and / or ear and / or head protection and take due care as the product or use of the product may present eye, hearing, and head hazards.	Running HazardDo not run on or near the product as doing so may present a fall hazard.	Diving HazardDo not dive into the product as doing so may present a neck / head injury hazard.	Adult Supervision RequiredAlways supervise children and other users of a product to prevent drowning or injury.
Skin Penetration / Puncture HazardThe product may produce pressure, emit liquids or objects that can cause severe injury to fingers, limbs, blood etc. Take due care when handling and using the product.	Hot Surface HazardBe aware that the product may produce high temperatures and hot surfaces that can cause burn injuries.	Flying Debris HazardBe aware that the product or use of the product may present hazards produced by flying debris. Wear appropriate clothing and protective devices.	Moving Parts HazardBe aware that the product contains or uses mechanical devices that move or rotate. Always wait for moving parts to stop fully before handling the product, adjusting, maintenance etc.
Carbon-Monoxide HazardDo not use the product in confined areas or without adequate ventilation. Carbon-monoxide poisoning can be fatal.	Pull HazardBe aware that the product contains or uses mechanical devices that can pull in objects and can cause severe injury to fingers, limbs etc. Take due care when handling and using the product.	Slope / Fall Injury HazardBe aware that using the product on sloping surfaces or in slippery conditions may present additional dangers from falls and contact with blades, moving parts, hot surfaces etc.	"Slam Dunk" WarningDo NOT attempt "slam dunk" manoeuvres as this may result in severe injury due to falling, product breakage or collapse etc.
Electrocution / Electrical Shock Hazard - OutdoorHigh voltage or high current electricity may be present or required by the product. Do NOT use in rain, damp, or wet conditions. Electrical shock can be fatal.	Electrocution / Electrical Shock Hazard - DisconnectHigh voltage or high current electricity may be present or required by the product. Always disconnect the product from the electrical supply before handling the product, adjusting, maintenance etc.	Power Line Electrocution HazardHigh voltage / high current power lines may be present. Use extreme caution to avoid contact or interference with power lines.Electrical shock can be fatal.	"Kick-Back" HazardHigh level of "kick-back" hazard that can cause the machine to suddenly rotate towards operator.Kick-back injury can be fatal.
Winch Operator Position HazardDo NOT stand between winch and load. Do NOT use winch to move people.	Winch Lift HazardDo NOT LIFT load vertically. Use machine to PULL only.	Cable HazardEnsure that load bearing cable is not kinked or knotted.	Winch Cable HazardEnsure that there is a minimum number of cable coils on winching mechanism.
Winch Hook HazardCarry hook to load – do NOT throw or run.	Flash / Blinding HazardWear appropriate eye protection for welding. Direct exposure to weld arcs may cause permanent eye injury.	Laser HazardLaser may be in use – do NOT look directly at laser or allow others to.

Table of Contents

Safety....2

Safety Symbols 7

Parts Identification.... 11

Hardware Included 11

Cultivator 12

Assembly 15

Installing the Handle Bar ....15

Adding Oil: Initial Use....17

Using the Right Oil 18

Fuelling the Unit 19

Operation 20

Using the Right Fuel....20

Definition of Blended Fuels 20

Using Blended Fuels....20

Using the Right Oil Type....20

wheel Adjustment....21

Starting Instructions....22

Stopping Instructions....25

Holding the Unit....25

Clearing Jams 25

Maintenance 26

Cleaning 26

Lubrication....26

Replacing the Blades 26

Maintenance Schedule....27

Checking the Oil Level....28

Inspecting the Oil Level....28

Adding Oil 28

Changing the Oil 29

Maintaining the Air Filter....30

Cleaning the Air Filter 30

Adjusting the Idle Speed....31

Maintaining the Spark Plug....32

Storage and Transportation 33

Storage....33

Short-Term Storage (1-2 weeks)....33

Long-Term Storage 33

Preparing the Unit for Use after Long-term Storage....33

Titan 9 4-Stroke Cultivator

Transportation 33

Troubleshooting.... 34

Specifications.... 35

Parts Identification

Hardware Included

Part	Name Qty.
AA	Bolt 4
BB1	Left middle handle bar	1
BB2	Right middle handle bar	1
CC	Gasket 4
DD	Knob 4
EE	Cable clip 2

Cultivator

Titan 9 4-Stroke Cultivator

Titan 9 4-Stroke Cultivator

Part	Name	Part	Name
A	Throttle lever	I	Guard
B	Handle (left & right)	J	Gearbox
BB1	Left middle handle bar	K	Blades
BB2	Right middle handle bar	L	Wheel
C	ON/OFF switch	M	Lower handle bar
DD	Knob	N	Choke button
EE	Cable clip	O	Air filter knob
F	Cable	P	Fuel cap
G	Starter grip and rope	Q	Oil fill plug
H	Primer bulb	R	Upper handle bar

Assembly

This product requires assembly. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the product carefully to make sure no age or damage occurred during shipping.

Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.

WARNING: The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!

Installing the Handle Bar

The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts.

Follow the assembly instructions step-by-step and use the pictures provided as a visual guide to easily assemble the product. Never start the engine before it is completely assembled!

1. Set up the cultivator on flat and firm ground to ensure safe and sturdy operating.
2. Align the holes in the left middle handle bar (BB1) with the holes in the lower handle bar (M) which has the same label and secure the connection with the bolts (AA), knobs (DD), and gaskets (CC) (Fig. 1).

1. Align the holes in the upper handle bar (R) with the holes in the left middle handle bar (BB1) and secure the connection with the bolts (AA), knobs (DD), and gaskets (CC) (Fig. 2).

1. Repeat with right middle handle bar (BB2).
2. Do not assemble as (Fig. 1.2).
3. Secure the cables with the cable clips (EE) (Fig. 3).

Adding Oil: Initial Use

CAUTION: Attempting to start the engine before it has been properly filled with lubricant will result in equipment failure not covered by the warranty.

WARNING: Overfilling the crankcase may cause serious issues. Check the oil level before each use. The importance of maintaining the proper oil level cannot be overemphasized. Change the oil according to the Maintenance Schedule.

CAUTION: Do not overfill. Overfilling the crankcase may cause excessive smoke, oil loss, and engine damage.

NOTE: Oil must be added before starting the unit.

1. Set the unit on a flat, level surface horizontally as shown below (Fig. 4).

1. Unscrew the oil fill plug (Fig. 5).

1	Oil fill plug/Dipstick
2	Upper limit
3	Lower limit
4	Oil fill hole

1. Pour the 3.37 oz. (100 ml) SAE 10W-30 into the oil fill hole. DO NOT overfill.
2. Insert the dipstick into the fill spout but do NOT screw in. Remove dipstick and check the oil level.
3. When oil level is full, the oil will be between the upper limit and lower limit on the dipstick. If oil level is below the lower limit, add oil until the fluid level rises between the upper limit and lower limit on the dipstick (Fig. 5).

Using the Right Oil

Use a high-quality SAE 10W-30. DO NOT use dirty oil. Failure to use clean oil of the correct type can cause premature engine wear and failure.

Fuelling the Unit

WARNING: Gasoline is extremely flammable. Ignited vapours may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep and open flames at a distance from the area.

Remove the fuel cap slowly to avoid injury from fuel spray. Never operate the unit without the fuel cap securely in place. Add fuel in a clean, well-ventilated outdoor area. Wipe up any spilled fuel immediately. Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapours dissipate.

WARNING: Gasoline and its vapours are highly flammable and explosive. To prevent serious injury and property damage, handle it with care. Keep away from ignition sources and open handle outdoors only.

Pour fuel outdoors where there are no sparks or flames. Slowly remove the fuel cap after stopping the engine. Do not smoke while fuelling. Wipe spilled fuel from the unit. Move at least 3 m (10 ft) away from the fuelling source before starting the engine.

WARNING: Always wear heavy, long pants, boots, gloves, and a long-sleeve shirt. Do not wear loose clothing, jewellery, short pants, sandals, or go barefoot. Secure hair so it is above er level.

1. Position the unit with the fuel cap facing up.
2. Slowly remove the fuel cap.
3. Place the fuel container spout into the fuel tank fill hole and fill the tank. Stop adding fuel when you see that the level reaches the base of the tank spout (Fig. 6).

1	Base of the tank spout

1. Wipe up any fuel that may have spilled.
2. Reinstall the fuel cap.
3. Move the unit at least 3 m (10 ft) from the fuel container and the fuelling site before starting the engine.

Operation

WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING: Always wear eye protection along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious injury.

WARNING: Operation of this equipment could create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

Using the Right Fuel

The use of old fuel is the most common cause of performance problems. Use only fresh, clean unleaded gasoline.

NOTICE: This unit has a four-cycle engine. DO NOT mix oil with gasoline.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxygenates such as ethanol, methanol, or MTBE (ether). Alcohol-blended fuel absorbs water. As little as 1% water in the fuel can make fuel and oil separate, forming acids when stored. ALWAYS use fresh fuel (less than 30 days old) with less than 10% ethanol. Dispose of old fuel according to federal, state, and local regulations.

Using Blended Fuels

If using a blended fuel:

• Always use fresh unleaded gasoline.
• Use the fuel additive STA-BILL ^® or an equivalent.

WARNING: DO NOT USE E85 OR E15 FUEL IN THIS UNIT. It has been proven that fuel containing greater than 10% ethanol will likely damage this engine and void the warranty.

WARNING: Operate this unit only in a well-ventilated outdoor area. Carbon monoxide exhaust fumes can be lethal in a confined area.

Using the Right Oil Type

• Using the proper type and weight of oil in the crankcase is extremely important.
- Check the oil before each use and change the oil regularly. Failure to use the correct oil, or using dirty oil, can cause premature engine wear and failure.
• Use a high-quality SAE 10W-30 weight oil of API (American Petroleum Institute) service class SF, SG, SH.

WARNING: Avoid accidentally starting the unit. To avoid serious injury, the operator and the unit must be in a stable position when pulling the starter rope.

WARNING: Do not operate the unit inside a closed environment, such as a room or building; breathing carbon monoxide from exhaust fumes can kill.

WARNING: Inspect unit before each use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and secure. Replace cutting attachment parts that are cracked, chipped, or damaged in any way. Make sure the cutting attachment is properly installed and securely fastened. Make sure the cutting attachment shield is properly attached, and in the position recommended by the manufacturer.

CAUTION: Clear the area to be cut before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cutting attachment. Clear the area of children, bystanders, and pets outside a 50 ft (15 m) radius: there is still a risk of injury from thrown objects outside the 50 ft (15 m) zone. Bystanders should be encouraged to wear eye protection. If you are approached, stop the engine and cutting attachment. In the case of bladed units, there is the added risk of injury to bystanders from being struck with the moving blade.

WARNING: In some countries, regulations define at what time of the day and on what special days products are allowed to be used and what restrictions apply! Ask your community for detailed information and observe the regulations to preserve a peaceful neighbourhood and avoid committing administrative offences.

wheel Adjustment

WARNING: Always wear safety glasses, ear protection and work gloves during operation. Avoid wearing loose clothing and accessories.

The wheels can be adjusted to two positions.

1. Pull on the wheel and move it to required position, let go of the wheel and make sure it locks in position (Fig. 7).

WARNING: The wheels can be adjusted in two different positions. Always ensure the wheels are securely locked! Do not attempt to use the product with the wheels in any other position or ed!

1	Working
2	Transport

Starting Instructions

1. When oil level is full, the oil will be between the upper limit and lower limit on the dipstick. If oil level is below the lower limit, add oil until the fluid level rises between the upper limit and lower limit on the dipstick. Reinstall the oil fill plug. (Fig. 5)

2. Fill the fuel tank. Stop adding the fuel when you see that the level reaches the base of the tank spout.

3. Slowly press and release the primer bulb 10 times (Fig. 8).

1. Push the choke button in until it clicks (Fig. 9).

NOTE: The choke automatically disengages when the throttle lever is squeezed.

1. Pull the starter rope with a controlled and steady motion five times until engine starts or attempts to start (Fig. 10).

1. Squeeze the throttle lever to release the choke button (Fig. 11).

IF... the unit fails to start. Squeeze the throttle control and pull the starter rope until the engine starts. IF THE ENGINE IS HOT... begin the starting procedure with step 5.

Stopping Instructions

1. Release the throttle lever and allow the engine to idle.
2. Press and hold the ON/OFF switch in the OFF (O) position until the engine comes to a complete stop (Fig. 12). Make sure the cutting attachment has stopped before the unit is set down.

NOTE: This OFF switch will come back to the ON position automatically.

Holding the Unit

• Stand in the operating position (hold the machine in front of your body). Stand up straight. Do not bend over.
• Keep feet apart and firmly planted.
• Hold the handle with two hands. Keep the arms straight.
• Do not over-reach; Keep all parts of your body away from the rotating cutting attachment and hot surfaces.

WARNING: Do not operate the machine with a damaged or excessively worn cutting device.

Clearing Jams

If the blades get jammed by a wire or other obstruction and cannot move, follow these important safety rules:

• NEVER reach for, or try to remove, jammed material while the engine is running.
  • ALWAYS switch the unit off and wait for blades to stop before clearing a jam.
• ALWAYS inspect the blades after clearing a jam to make sure all jammed material has been cleared, and to make sure blades are not damaged.

Maintenance

ATTENTION: Surface corrosion will occur on metal surfaces over time and the rate of oxidation

depends on factors such as proximity to the ocean and humidity or condensation of water vapour on

metal surfaces. To mitigate this, WD40 can be used to remove surface corrosion then, when applied periodically, it will prevent rust from forming.

NOTICE: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage.

NOTICE: Users are not allowed to set the carburettor or ignition. If further assistance is required, take the unit to a qualified service dealer.

WARNING: To avoid serious injury, always stop the engine and allow it to cool before cleaning or maintaining the unit. Never perform cleaning or maintenance while the unit is running. Disconnect the spark plug wire to prevent the unit from starting accidentally.

WARNING: Wear protective clothing and observe all safety instructions to prevent serious injury.

Cleaning

Use a small brush to clean the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic. Wipe off any moisture with a soft cloth.

Correct and regular cleaning is not only important for the safe use of this product, but also extends its life span.

Lubrication

For a long lifespan, make sure that the cutting blades are cleaned and lubricated at regular intervals to ensure the best possible performance. Routinely apply a thin film of lubricating oil.

Replacing the Blades

WARNING: To avoid serious injury, always stop the engine and allow it to cool before replacing the blades.

1. To replace the blades, take off the pin.

2. Take off the broken blades and replace the new blades according to the original position (Fig. 13).

1. Re-insert the pin to secure the blades.

Maintenance Schedule

WARNING: When the engine idles, user should check the cutting attachment stops while turning routinely.

WARNING: To prevent any danger or defects, user should check and maintain every part of the machine before use and after dropping or other impacts.

Perform these required maintenance procedures at the frequency stated in the table. These procedures should also be a part of any seasonal tune-up.

NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about these procedures, take the unit to a qualified service dealer.

NOTE: Maintenance, replacement, or repair of the emission control devices and system may be performed by a qualified service dealer.

Every 10 hours	Clean the air filter. Refer to Maintaining the Air Filter.
Every 20 hours	Change the oil. Refer to Changing the Oil.Replace the oil after the first 5 hours.
Every 30 hours	Have the rocker arm clearance checked by a qualified service dealer.Check the spark plug condition and gap. Refer to Maintaining the Spark Plug.

NOTE: If the engine frequently operates under dusty or other severe circumstances, increase the cleaning frequency.

Remarks

• The maintenance interval is only a recommendation for machines in ordinary operating condition.
- If there are any abnormal signs from the machine, please do the proper inspection and maintenance immediately.
• All other repairs or maintenance should be done by a qualified service centre.

Checking the Oil Level

WARNING: Check the oil level before each use. The importance of maintaining the proper oil level cannot be overemphasized.

Inspecting the Oil Level

1. Stop the engine and allow it to cool.
2. Set the unit on a flat, level surface horizontally.

NOTE: Failure to keep the engine level may result in a faulty oil level reading.

1. Remove dipstick and check oil level. When oil level is full, the oil will be between the upper limit and lower limit on the dipstick (Fig. 14). If the oil level is too low, add oil. Refer to Adding Oil.

1	Oil fill plug/Dipstick
2	Upper limit
3	Lower limit
4	Oil fill hole

Adding Oil

1. Set the unit on a flat, level surface horizontally.
2. Clean the area around the oil fill plug (Fig. 14) to prevent debris from entering the oil fill hole.

3. Unscrew the oil fill plug.

4. Insert the dipstick into the fill spout but do NOT screw in. Remove the dipstick and check the oil level. Add oil until the fluid level rises between the upper limit and lower limit on the dipstick (Fig. 14).

NOTE: If the oil level is too high, tip the unit and drain the excess oil into an appropriate container.

1. Wipe up any oil that may have spilled.

2. Reinstall the oil fill plug.

WARNING: DO NOT overfill the oil level. Overfilling will result in too much oil in the engine crankcase and may cause smoke or fumes that can injure the user.

Changing the Oil

WARNING: Old engine oil is considered special waste and must be disposed according to your local environment protection regulation. Do not pour the oil into a garbage can, sewer, soil etc.

Change the oil while the engine is still warm. The oil will flow freely and carry away more impurities.

1. Clean the area around the oil fill plug (Fig. 14) to prevent debris from entering the oil fill hole.

2. Unscrew the oil fill plug.

3. Tip the unit vertically to pour the oil out of the oil fill hole and into a container (Fig. 15). Allow ample time for complete drainage.

NOTE: Dispose of the old oil according to federal, state, and local regulations.

1. Wipe up any oil that may have spilled.
2. Set the unit on a flat, level surface horizontally.
3. Pour 3.37 oz. (100 ml) SAE 10W-30 into the oil fill hole. When oil level is full, the oil will be between the upper limit and lower limit on dipstick (Fig. 14). If the oil level is too low, add oil. Refer to Adding Oil.
4. Wipe up any oil that may have spilled.
5. Reinstall the oil fill plug.

WARNING: DO NOT overfill the oil level. Overfilling will result in too much oil in the engine crankcase and may cause smoke or fumes that can injure the user.

Maintaining the Air Filter

Failure to maintain the air filter can result in poor performance or can cause permanent damage to the engine. Engine failure due to improper air filter maintenance is not covered by the product warranty.

Cleaning the Air Filter

1	Air filter housing
2	Air filter
3	Air filter knob

1. Unscrew the air filter knob completely. Remove the air filter cover from the air filter housing (Fig. 16).
2. Remove the air filter from the air filter housing.
3. Wash the air filter in detergent and water. Rinse the air filter thoroughly and allow it to dry.
4. Apply enough clean SAE 10W-30 motor oil to lightly coat the filter.
5. Squeeze the filter to spread and remove excess oil.
6. Reinstall the air filter in the air filter housing (Fig. 16).

NOTICE: Operating the unit without the air filter and air filter cover will VOID the warranty.

1. Insert the tab on the air filter cover into the hole in the air filter housing. Push the air filter cover back onto the air filter housing. Tighten the air filter knob to secure the air filter cover (Fig. 16).

NOTICE: Do not overtighten as this may strip the air filter knob.

Adjusting the Idle Speed

WARNING: The cutting blades will move when adjusting the idle speed. Wear all protective clothing and keep all bystanders, children, and pets at least 50 ft. away. Adjust with the unit ted by hand so that the cutting blades does not contact the ground or any object.

Keep all parts of your body away from the cutting blades and muffler. Failure to follow these instructions could result in serious injury.

If the engine will not idle properly:

1. Start the engine. Refer to Starting Instructions.
2. Release the throttle control and let the engine idle.

1	Idle speed screw
2	Primer bulb

• If the engine stops, increase the idle speed. Use a small screwdriver to turn the idle speed screw clockwise, 1/8 of a turn at a time, until the engine idles smoothly (Fig. 17).
• If the cutting blades spin when the engine idles, reduce the idle speed. Turn the idle speed screw anticlockwise, 1/8 of a turn at a time, until the cutting head stops moving.

WARNING: The cutting attachment should never turn at idle. Turn the idle speed screw anti-clockwise to reduce the idle RPM and stop the cutting attachment or contact the manufacturer

for adjustment and discontinue use until the repair is made. Serious injury could result from the cutting attachment turning at idle.

Maintaining the Spark Plug

1. Stop the engine and allow it to cool. Grasp the spark plug boot firmly and pull it from the spark plug.
2. Clean around the spark plug. Remove the spark plug from the cylinder head with a 5/8-inch socket, turning anti-clockwise.

CAUTION: Do not remove the spark plug when the engine is hot. Do not sand blast, scrape or clean spark plug electrodes. Grit in the engine could damage the cylinder.

1. Inspect the spark plug. If the spark plug is cracked, fouled or dirty, replace it with replacement part refer to PART or an equivalent spark plug.
2. Use a feeler gauge to set the air gap at 0.6 mm - 0.8 mm (0.025 in. - 0.031 in.) (Fig. 18).
3. Install the spark plug in the cylinder head. Tighten the spark plug with a 5/8-inch socket, turning it clockwise until snug.

NOTICE: If using a torque wrench, torque to 12 Nm. Do not over tighten.

1. Reattach the spark plug boot.

1	0.60 mm - 0.80 mm0.025 in. - 0.031 in.

Storage and Transportation

Storage

• Never store a fuelled unit where fumes may reach an open flame or spark.
• Allow the engine to cool before storing.
• Lock up the unit to prevent unauthorized use or damage.
  • Store the unit in a dry, well-ventilated area.
  • Store the unit out of the reach of children.
  • Store the unit after cleaning the cutting blade.

Short-Term Storage (1-2 weeks)

Store the unit in a horizontal position.

Long-Term Storage

1. Remove the fuel cap, tip the unit, and drain the fuel into an approved container. Reinstall the fuel cap.
2. Start the engine and allow it to run until it stalls. This ensures that all fuel has been drained from the carburettor.
3. Allow the engine to cool. Remove the spark plug and put 5 drops of any high-quality motor oil into the cylinder. Pull the starter rope slowly to distribute the oil. Reinstall the spark plug.
4. Thoroughly clean the unit and inspect it for any loose or damaged parts. Repair or replace damaged parts and tighten loose screws, nuts, or bolts.
5. Store the unit in a horizontal position.

Preparing the Unit for Use after Long-term Storage

1. Remove the spark plug. Tip the unit and drain all of the oil from the cylinder into an approved container. Reinstall the spark plug.
2. Change the oil. Refer to Changing the Oil.

NOTICE: Do not use fuel that has been stored for more than 30 days. Dispose of old fuel and oil according to federal, state, and local regulations.

Transportation

CAUTION: Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.

Transport the unit in a horizontal position. If not possible, transport the unit vertically with the engine at the top. Secure the unit to prevent damage during transport.

Secure the unit to prevent it from slipping or falling over.

Troubleshooting

PROBLEM SOLUTION

THE ENGINE WILL NOT START

The fuel tank is empty.	Fill the fuel tank with fresh fuel.
The primer bulb was not pressed enough.	Press the primer bulb 10 times.
The fuel is old (over 30 days).	Drain the fuel tank and add fresh fuel.
The spark plug is fouled.	Replace the spark plug.
The air filter is dirty.	Clean or replace the air filter.

THE ENGINE WILL NOT IDLE

The air filter is dirty.	Clean or replace the air filter.
The fuel is old (over 30 days).	Drain the fuel tank and add fresh fuel.
Idle speed screw needs adjustment.	Turn idle speed screw clockwise to increase idle speed.

THE ENGINE EMITS TOO MUCH SMOKE

Too much oil in crankcase.

Drain engine oil and refill with correct amount of engine lubricant.

THE ENGINE WILL NOT ACCELERATE

The fuel is old (over 30 days).	Drain the fuel tank and add fresh fuel.
The cutting blades is bound with any objects.	Stop the engine and clean the cutting blades.
The air filter is dirty.	Clean or replace the air filter.

THE ENGINE LACKS POWER OR STALLS

The fuel is old (over 30 days).	Drain the fuel tank and add fresh fuel.
The air filter is dirty.	Clean or replace the air filter.
The spark plug is fouled.	Replace the spark plug.

UNSATISFACTORY CUTTING PERFORMANCE

Cutting blade is dull/damaged.	Replace or contact a qualified service dealer.
Cutting material exceeds capacity.	Only cut material according to the capacity of the unit.

EXCESSIVE VIBRATION/NOISE OR EXHAUST

Bolts/Nuts are loose.	Tighten.
Gas/oil is incorrect.	Empty unused fuel and oil. Refill with fresh fuel and oil.

Specifications

Max Tilling Depth 200mm

Tilling Width 400mm

Engine Type Petrol 4-Stroke

Fuel Type Unleaded (min 95 RON)

Displacement 46cc

Max blade speed 250RPM

Starting System Recoil (pull cord start)

Fuel Type Regular Unleaded 91+ RON, E10

Fuel Volume 800ml

Wheel Size 6"

Note: Assembly Required

Some experts believe that the incorrect or prolonged use of almost any product may cause serious injury or death. To help reduce your risk of serious injury or death, refer to the information below. For more information, see www.datastreamserver.com/safety

• Consult all documentation, packaging, and product labelling before use. Note that some products feature documentation available online. It is recommended to print and retain the documentation.
  ■ Before each use, check the product for loose/broken/damaged/missing parts, wear, or leaks (if applicable). Never use a product with loose/broken/damaged/missing parts, wear, or leaks.
  ■ Products must be inspected and serviced (if applicable) by a qualified technician every 6 months. This is based on average residential use by persons of average size and strength, and on a property of average metropolitan size. Use beyond these recommendations may require more frequent inspections/servicing.
  ■ Ensure that all users of the product have completed a suitable industry recognised training course before being allowed access to the product.

The product has been supplied by a general merchandise retailer that may not be familiar with your specific application or description of application. Be sure to attain third-party approval from a qualified specialist for your application before use, regardless of any assurances from the retailer or its representatives.
This product is not intended for use where fail-safe operation is required. As with any product (for example, automobile, computer, toaster), there is the possibility of technical issues that may require the repair or replacement of parts, or the product itself. If the possibility of such failure and the associated time it may take to rectify could in any way inconvenience the user, business, or employee, or financially affect the user, business, or employee, then the product is not suitable for your requirements. This product is not intended for use where incorrect operation or a failure of any kind, including but not limited to, a condition requiring product return, replacement, parts replacement, or service by a technician may cause financial loss, loss of employee time or an inconvenience requiring compensation.
If this product has been purchased in error when considering the information presented here, contact the retailer directly for details of their returns policy, if required.

©2022 Plant Craft. All rights reserved. No part of this document, including descriptive content, concepts, ideas, diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system, without express permission or consent from the publisher.