SWD 110 - Doorbell SENCOR - Free user manual and instructions

Product Type	Wireless Door Chime
Brand	Sencor
Model	SWD 110
Color	White
Material	Plastic
Dimensions (Receiver)	Approx. 80 x 60 x 20 mm
Weight (Receiver)	100 g
Power Supply	2x AAA batteries (not included)
Battery Life	Up to 12 months under normal use
Operating Range	Up to 100 m in open space
Number of Melodies	16 selectable chimes
Volume Control	Yes, adjustable (silent to loud)
LED Indicator	Flashes when doorbell is pressed
Water Resistance	IP44 (splash-proof for outdoor use)
Mounting Type	Wall mount with screws or adhesive tape
Compatibility	Works with any standard doorbell button
Included Accessories	Receiver unit, push button, screws, double-sided tape
Operating Temperature	-10°C to 50°C
Certifications	CE, RoHS
Warranty	2 years

Frequently Asked Questions - SWD 110 SENCOR

How do I pair the doorbell button with the receiver?

Insert batteries into both units. Press and hold the pairing button on the receiver until the LED flashes rapidly, then press the doorbell button. The LED will stop flashing, indicating successful pairing.

How do I replace the batteries?

Open the battery compartment cover of the receiver or button, remove old batteries, and insert new AAA batteries (2x for receiver, 1x for button) observing polarity. Close the cover.

Can I adjust the volume?

Yes, the receiver has a volume control wheel or button. Turn or press to cycle through volume levels including a silent mode.

How far can the doorbell work from the receiver?

The operating range is up to 100 meters in open space. Walls and obstacles may reduce the range.

How do I change the melody?

Press the melody button on the receiver to cycle through the 16 available chimes. Each press selects the next melody.

What should I do if the chime does not sound?

Check that both units have working batteries and are within range. Try re-pairing the units. Ensure the volume is not set to silent.

What does the flashing LED indicate?

The LED on the receiver flashes when the doorbell button is pressed. A slow flash during pairing indicates waiting for connection, while a steady flash confirms successful pairing.

Is the doorbell weatherproof?

The doorbell button has an IP44 rating, making it splash-proof and suitable for outdoor use. The receiver is designed for indoor use only.

How do I mount the receiver?

Use the provided screws to attach the wall bracket, then slide the receiver onto it. Alternatively, use the double-sided adhesive tape for a no-drill installation.

Can I use multiple receivers with one button?

Yes, you can pair multiple receivers to the same button by repeating the pairing process for each receiver. All will chime when the button is pressed.

USER MANUAL SWD 110 SENCOR

Declaration of Conformity

Product/ brand: WIRELESS DOORBELL/ SENCOR

Type/ model: SWD 110 / SWD 112 as factory model B-289

Receiver: AC 100-240V, 50/60Hz, 0,2A, Class III, IPX0

Transmitter: DC 3V (1x 3V type CR2032 button battery), Class III, IPX0

Freq. 433.92Hz

Manufacturer: FAST ČR, a.s.

Černokostelecká 2111, 100 00 Praha 10, Czech Republic

VAT no: CZ26726548

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

Directive RED 2014/53/EU

Directive RoHS 2011/65/EU

The relevant harmonised standards and the other technical specifications :

EN 62368-1:2014+A11

EN 301 489-1 V2.1.1

EN 301 489-3 V2.1.1

EN 300 220-1 V3.1.1

EN 300 220-2 V3.1.1

EN 62479:2010

CE

Place of Issuance: Prague

Chairman of the Board

Name: Ing. Zdeněk Pech

Date of issuance: 15.3.2020

Signature: