Safe View - Surveillance Camera BML - Free user manual and instructions

Product Type	Indoor Security Camera
Brand	BML
Model	Safe View
Power Supply	AC adapter (included)
App Compatibility	iOS and Android via "Eye camera" app
Wi-Fi Connection	2.4 GHz Wi-Fi with smart connection and manual add
Live Streaming	Yes, with pan/tilt control via app
Preset Positions	Up to 5 stored positions
Alarm System	Supports up to 60 wireless detectors (motion, smoke, door, etc.)
Recording	MicroSD card (5-64 GB, FAT32 formatted)
Audio	Two-way audio (microphone and speaker)
Default Password	123459
Included Accessories	Wall mount, screws, and optional Safe HomeSet pack (sensors, smoke detector, motion sensor)
Maintenance	Clean with dry cloth; do not rotate manually
Safety Instructions	Read enclosed safety instructions before use

Frequently Asked Questions - Safe View BML

How do I download and set up the app?

Download the Eye camera app from the App Store or Google Play. Install it and register using your phone number or email address.

How do I add a new camera to the app?

Plug in the camera and wait for a beep. Open the app, press the + button in the upper-right corner, and select 'Camera connections - add new device'. Choose 'Smart connection' and enter your Wi-Fi SSID and password. Hold your phone speaker near the camera within 30 seconds. When the camera beeps again, it is connected. Name the camera and set a password (default: 123459).

Can I add a camera manually?

Yes, if the camera is already online and you know its ID and access code, use the Add manually option in the app.

How do I view the live stream and control the camera?

Tap the camera thumbnail on the home page to start live streaming. For pan/tilt, use the touch interface. You can save up to 5 preset positions by moving the camera to the desired angle, holding the 'P' button, and pressing OK.

How do I set up alarms?

Go to the gear icon in the app, select Alarm settings. Pair wireless sensors like motion or door detectors (up to 60 devices). When a sensor triggers, the camera records and notifies you via app or email. You can also adjust the alarm duration.

How do I record video and what storage is supported?

Insert a microSD card with the camera turned off. The camera supports cards from 5 GB to 64 GB. Cards larger than 12 GB must be formatted to FAT32 on a computer. Enable recording in 'Alarm recording settings'.

How do I delete a device from the app?

On Android, hold the camera thumbnail for 2 seconds and press OK to remove. On iOS, swipe left on the device and tap delete.

What is included in the package?

The package includes the camera, wall mount with screws, and optionally the Safe HomeSet pack (additional sensors). Check your specific package contents.

How do I pair additional sensors?

Go to the app's gear icon, select Add sensors. Press the sensor's button or trigger it (e.g., open a door). The camera will detect and name the sensor. Repeat for other detectors.

What should I do if the camera stops working or has connection issues?

Restart the camera by unplugging and plugging it back in. Ensure Wi-Fi is stable and the app is up to date. If the issue persists, consult the manual or contact support. Do not rotate the camera manually to avoid damage.

USER MANUAL Safe View BML

Download the "IEye-camera" app, install and register. To register, use your phone number or email address.

App Store Google Play

App Store Google Play

1) Downloading the app

a) Add using the Smart connection feature – this feature automatically pairs the camera with Wi-Fi quickly and easily. On the home screen, press the “+” button (in the upper-right corner) and then select “Smart connection – Add new device”. Plug the camera into a power source and power it on. Wait for a moment until the camera produces a cue tone. If you don’t hear the tone after some time, reset the camera and try again. Next enter the Wi-Fi SSID (name) and password (the same Wi-Fi and password that your mobile is currently connected with). Turn the volume up on your mobile and hold it up to the camera (within 32cm) and wait for the connection to be established. The camera will beep when it has successfully been connected to the Wi-Fi. Now name your camera and insert the password “123456” (default) and then save. The camera is now online.

b) Add manually – this method only applies to new cameras which are already online i.e. cameras that have already been connected to Wi-Fi and you know their ID and access code (password).

3) Deleting a Device

Android version: hold the camera thumbnail on the main page for about 2 seconds and a window will pop up asking if you want to remove the device. Press OK to delete it.

iOS version: select the camera and swipe to the left to remove it from the list.

4) Live Streaming and Settings

To start, press the camera thumbnail on the home page. For rotating cameras, you can rotate the camera using the touchscreen of your mobile device and save up to 5 positions in the memory. In the app, move the camera to the position you require and hold "1" in the header and then press "OK". This camera position is now stored. Repeat this for each other position and save each time under a different number. Now you can quickly and easily switch views between stored positions. Never turn the camera manually! This may cause mechanical damage which is not covered by warranty.

	Guard (alarm)ON/OFF		AudioON/OFF
	MicrophoneON/OFF		Snapshot
	Turn off	01 02 03 04 05Positions in the memory

5) Main Icons and Settings

6) Setting the Alarm

Pairing – the camera can have up to 64 wireless alarm detectors added. All of these devices must first be paired with the camera before regular use. For example, to set a magnetic door sensor as the first paired device, press the gear icon (settings), then "Add sensors" and then press "6" next to "Sensor" and confirm. When the device is paired, press the device or sensor button or optionally activate it (e.g. by separating the sensor parts or by movement). The camera channel is now recorded and stored and can be named. Follow the same procedure for the other detectors (10m range motion sensor, smoke detector, etc.).

Now you can adjust the settings in "Alarm settings", where you can set whether you are informed about the alarm via the app or via email, the length of the audible alarm and more. We recommend regularly checking the batteries in all detectors.

7) Recording

Insert the microSD card only when the camera is disconnected from the power supply. The camera typically supports cards of 8-32GB. Cards bigger than 32GB must first be formatted in a computer using the FAT32 file system, up to a maximum of 64GB. Different recording options can be set in "Video recording settings".

8) Pack Contents

a) Camera

b) AC adapter

c) Wall mount, including screws

d) In the "Safe HomeSet" pack there are an extra 4 basic alarm detectors (2× magnetic doors sensors, smoke detector, motion sensor)

Safety when working with the device:

1. Carefully read the enclosed safety instructions
2. To use the product, read the most recent version of the manual, which is available for download at: http://bml-electronics.com
3. Printing errors reserved.

USER MANUAL

INSTRUCTION MANUAL

USER MANUAL

b) Adapter (AC) c) Explicit language with a corrected