GK-9 - Screwdriver Emos - Free user manual and instructions

Product Type	Cordless Screwdriver
Brand	Emos
Model	GK-9
Voltage	3.6 V
Battery Type	Li-Ion
Battery Capacity	1.5 Ah
Chuck Size	1/4" (6.35 mm) Hex
Max Torque	5 Nm
Speed	0 - 600 rpm
Weight	0.3 kg
Dimensions (L x W x H)	200 x 50 x 50 mm
Charging Time	3 - 5 hours
LED Light	Yes
Forward/Reverse	Yes
Ergonomic Handle	Yes
Belt Clip	Yes
Included Accessories	5 bits, charger
Maintenance	Clean with dry cloth; avoid moisture
Safety Precautions	Use protective eyewear; keep away from water
Spare Parts Availability	Bits, battery available
Repairability	Replaceable battery

Frequently Asked Questions - GK-9 Emos

How to charge the GK-9 screwdriver?

Connect the charger to the screwdriver's charging port and plug it into a mains outlet. The LED indicator will show red during charging and turn green when fully charged. Charging time is approximately 3-5 hours.

How to insert and remove bits?

Pull the chuck forward to open, insert the bit until it clicks, then release the chuck. To remove, pull the chuck forward and pull out the bit.

How to change the direction of rotation?

Use the forward/reverse switch located above the trigger. Slide it to the left for clockwise (screwing) and to the right for counterclockwise (unscrewing).

What is the maximum torque of this screwdriver?

The maximum torque is 5 Nm, suitable for light to medium-duty tasks such as assembling furniture or electronics.

Can I use the screwdriver while charging?

No, the screwdriver cannot be used while connected to the charger. Charge it fully before use.

How to clean and maintain the screwdriver?

Wipe the exterior with a dry cloth. Keep the chuck and vents free of dust. Do not use water or solvents. Store in a dry place.

What should I do if the battery doesn't charge?

Ensure the charger is plugged in and the contacts are clean. If the issue persists, contact Emos support for a replacement battery.

Is it safe to use the screwdriver outdoors?

Use only in dry conditions. Moisture can damage the tool. Always wear protective eyewear and keep hands away from moving parts.

Where can I buy spare bits or a replacement battery?

Spare parts are available from authorized Emos dealers or online stores. Search for 'Emos GK-9 bits' or 'Emos 3.6V battery'.

How long does the battery last on a full charge?

The battery provides about 2 hours of continuous use depending on the load. For light tasks, it may last longer. Recharge when performance drops.

USER MANUAL GK-9 Emos

Technical specifications

Voltage range should be 6V-12V-24V-50V-120V-230V-400V

Indication LED lights up to the Voltage reading

Frequency range 0-60Hz

Maximum Time of measuring is 10 seconds. Then you have to follow dwell 240 seconds.

Operation

Voltage measurement (LED indicators light up to confirm voltage status)

Touch the live (L) terminal with probe of the tester

Probe the neutral (N) terminal with the probe of the test lead

The LED indicators will illuminate if the circuit is live and the VOLTAGE indicators will illuminate to conform the voltage.

When measuring DCV, polarity of +/- will light also.

Maintenance

This tester is designed to have no serviceable parts and is maintenance free.

Cleaning

Periodically wipe the tester with a soft cloth and mild household cleaner. Do not use abrasive s of solvents.

Ensure that no water gets inside the equipment to prevent possible shorts and damage.

Warnings

Continuous contact with the unit under test will create severe damage and injury. Any testing contacts must not extended a 10 seconds duration

Safety rules

- This tester is designed and tested in accordance with IEC/EN61010-1.

• This meter is designed to be indoor use at temperature 5^ to 40^ and altitude up to 2000m .
• This tester is designed to „TOUCH" testing only. Do not keep continuos contact with the unit under test for 10 sec, especially to high voltage. Maximum Time of measuring is 10 seconds. Then you have to follow dwell 240 seconds.
• Test on know live circuit to familiar yourself with response from a live cable.
• Do not use tester if the tester or test leads look damaged, or if you suspect that the tester is not operating properly
• When using the probes, keep your fingers behind the finger guard on the probes.
  • Always ensure probes are dry and do not work with wet hands

International symbols

– Caution, risk of danger, refer to the operating manual before use

– Caution, risk of electric shock

- Double insulated

– Facility for measuring voltage

- Direct current

- Alternating current

It is possible to get technical support from the supplier:

EMOS spol. s r.o., Šířava 295/17, 750 02 Přerov I-Město, Czech Republic

This product is not to be used by persons (including children), whose physical, sensual or mental abilities or lack of experience and knowledge does not ensure safe use of the appliance, unless they are supervised or unless they have been

instructed about the use of this appliance by a person in charge of their safety. Supervision over children is required to prohibit them from playing with the appliance. When the product and batteries reach the end of their service life, do not throw them into non sorted communal waste, use sorted waste collection points instead. By proper disposal you can avoid negative impact on human health and environment. Recycling of materials helps to protect

our natural resources. You can get more information about recycling of this product from your municipal authority, the nearest household waste processing company or the sales point, where you bought the product.

Declaration of Conformity has been issued for this product.

CZ KOUŠEČKA NAPĚTÍ GK-9