Kit 3094 - Uncategorized THULE - Free user manual and instructions

Product Type	Roof Rack Kit
Brand	Thule
Model	Kit 3094
Compatible Vehicles	Universal fit for most vehicles with raised rails or factory racks
Material	Aluminum anodized and stainless steel
Maximum Load Capacity	75 kg (165 lbs) per pair
Weight	5.2 kg (11.5 lbs)
Dimensions	1200 mm length, 100 mm width, 50 mm height
Crossbar Diameter	Rectangular profile 70 x 30 mm
Locking Mechanism	Integrated lock with key (One-Key System)
Installation Method	Clamp onto factory rails or fixed points; no drilling required
Tools Required	Torque wrench and included hex key
Aerodynamic Design	Yes, low profile wind deflector reduces drag and noise
Color	Black anodized
Certification	TÜV tested, City Crash approved
Maintenance	Clean with mild soap and water; lubricate locks annually
Warranty	2 years limited warranty
Package Contents	2 crossbars, 4 feet, 4 lock cylinders, mounting hardware, instruction manual
Compatible Thule Accessories	Load bars, cargo boxes, bike racks, ski racks, kayak carriers
Country of Origin	Sweden

Frequently Asked Questions - Kit 3094 THULE

Is the Thule Kit 3094 compatible with my car?

The Kit 3094 is a universal roof rack kit designed to fit most vehicles with raised rails or factory rack attachment points. Check the Thule Fit Guide on our website using your vehicle make, model, and year to confirm compatibility.

What is the maximum load capacity of the Thule Kit 3094?

The maximum load capacity is 75 kg (165 lbs) per pair of crossbars, evenly distributed. Always adhere to your vehicle's roof load limits, which are often lower.

How do I install the Thule Kit 3094?

1. Attach the feet to the crossbars. 2. Place the assembly on your vehicle's roof rails. 3. Adjust to fit snugly. 4. Tighten the clamps using the included hex key to the specified torque. 5. Lock the system with the key. Refer to the instruction manual for detailed steps.

Do I need to drill holes in my car to install this kit?

No, the Thule Kit 3094 uses a clamp-on system that attaches to existing roof rails or fixed points. No drilling or permanent modifications are required.

Can I use bike racks or cargo boxes with the Kit 3094?

Yes, the Kit 3094 is compatible with many Thule accessories, including bike racks, ski carriers, cargo boxes, and kayak carriers. Ensure the accessory is properly attached to the crossbars.

How do I maintain the roof rack?

Clean the rack with mild soap and water to remove road salt and dirt. Lubricate the locks annually with a silicone spray. Check all bolts and clamps for tightness periodically.

What tools are needed for installation?

You will need a torque wrench (recommended to avoid overtightening) and the hex key included in the package. The instruction manual provides torque specifications.

Is the Thule Kit 3094 lockable?

Yes, it features an integrated lock with a key to secure the crossbars to the roof rails, helping to prevent theft. Thule's One-Key System allows you to use the same key for multiple Thule products.

What is the warranty on the Thule Kit 3094?

Thule offers a 2-year limited warranty against defects in materials and workmanship. Keep your purchase receipt for warranty claims.

Can I drive through a car wash with the roof rack installed?

It is not recommended to drive through automatic car washes with the roof rack installed, as the water jets and brushes could damage the rack or vehicle. Hand washing is advised.

USER MANUAL Kit 3094 THULE

This Kit is only for vehicles with fixpoint mounting.

Line drawing of a mechanical component with no visible text or symbols

460R 753

Two technical diagrams showing mechanical components with cross-sectional views (no text or symbols)

Line drawing of a mechanical component with a handle and base (no text or symbols)

460

Simple line drawing of a rectangular object with a hatched fill and a small rectangular block above it (no text or symbols)

THULE® SWEDEN

ISO 11154-E

753

Technical line drawing of a mechanical component with no visible text or symbols

x4 x4

x4

x1
x8

x4

x1

460R

Technical line drawing of a mechanical component with no visible text or symbols

x4 x4

x4

x1

460

Technical line drawing of a mechanical component with no visible text or symbols

x4 x4

x4

x8

x1
x4

x2

x2

x 1x

8

Diagram showing a mechanical component with an arrow indicating transformation or assembly (no text or symbols present)

Technical diagram of a mechanical assembly with internal components and motion indicators (no text or symbols)

i

GB Only a few turns

7

Illustration of a person using a mechanical device to adjust or install a component (no text or symbols visible)