Gentofte (160x200) - Bed JYSK - Free user manual and instructions

Product Type	Bed Frame
Brand	JYSK
Model	Gentofte (160x200)
Mattress Size	160 cm x 200 cm (Queen)
Overall Dimensions (L x W x H)	Approx. 169 cm x 160 cm x 40 cm
Weight	Approx. 40 kg
Material	Engineered wood (particle board) with laminate finish
Frame Construction	Solid outer frame with center support legs
Slat Support	Wooden slats included (approx. 15 slats)
Recommended Mattress Type	All standard mattresses (spring, foam, latex)
Maximum Weight Capacity	200 kg (440 lbs) evenly distributed
Assembly Required	Yes (2 persons recommended)
Tools Included	4 mm hex key (Allen key)
Additional Hardware	Screws: 7x50 mm, 8x32 mm; Dowels; Lock washers
Country of Origin	Designed in Denmark, manufactured in China
Warranty	2 years against manufacturing defects
Cleaning Instructions	Wipe with a soft, damp cloth; do not use harsh chemicals
Care Instructions	Periodically tighten screws; avoid excessive moisture
Safety Warnings	Do not jump on bed; ensure all bolts are tight before use
Repair Information	Contact JYSK customer service for replacement parts
Spare Parts Availability	Common parts (slats, screws) available from JYSK

Frequently Asked Questions - Gentofte (160x200) JYSK

What are the overall dimensions of the Gentofte bed frame?

The bed frame is designed for a 160x200 cm mattress. The outer frame measures approximately 169 cm in length, 160 cm in width, and 40 cm in height.

Does the bed require a box spring?

No, the bed includes a slatted base, so a box spring is not necessary. However, you can use a low-profile box spring if desired.

Is a slatted base included?

Yes, wooden slats are included in the package. They provide support for your mattress and help with ventilation.

What tools are required for assembly?

The only tool needed is a 4 mm hex key (Allen key), which is included. A screwdriver may be helpful but is not required.

How can I prevent the bed from squeaking?

To minimize squeaking, ensure all screws are tightened properly. You can also apply a silicon-based lubricant to joints or place felt pads between slats and frame.

What is the maximum weight capacity?

The bed frame can support up to 200 kg (440 lbs) evenly distributed across the mattress surface. Do not exceed this limit.

Can I use a memory foam mattress?

Yes, memory foam mattresses are compatible. For best support, ensure the slats are no more than 7 cm apart; if necessary, add a bunkie board.

How should I clean the bed frame?

Use a soft, damp cloth to wipe the surface. Avoid abrasive cleaners, bleach, or excessive water, as they may damage the laminate.

Is assembly difficult?

Assembly is straightforward and can be completed by two people in about 30-45 minutes. Follow the step-by-step manual and use the included hardware.

Where can I get spare parts?

Spare parts such as slats, screws, or dowels are available from JYSK customer service or your local JYSK store. Provide the model name (Gentofte) and part number.

USER MANUAL Gentofte (160x200) JYSK

A1		∅7x50	40
ZK			40
K1		∅8x32	52
S1			10
S2			12
KL		40g	1
I		4mm hex	1
LM		L - 1690	2
LM		L - 470	2
LM		L - 305	2